Instrukcja obsługi McIntosh MA9500

McIntosh odbiornik MA9500

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla McIntosh MA9500 (20 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/20

MA9500

Integrated Ampliﬁer

Owner's Manual

FCC Information (For US Customers)

1. IMPORTANT NOTICE:

DO NOT MODIFY THIS PRODUCT

This product, when installed as indicated in the instructions

contained in this manual, meets FCC requirements. Modication

not expressly approved by McIntosh may void your authority,

granted by the FCC, to use the product.

2. CAUTION:

• To comply with FCC RF exposure compliance requirement,

separation distance of at least 20cm must be maintained between

this product and all persons.

• This product and its antenna must not be co-located or

operating in conjunction with any other antenna or transmitter.

3. COMPLIANCE INFORMATION:

• Product Name: Integrated Turntable

• Model Number: MTI100

• This product contains FCC ID: SSS-BC11X:

McIntosh Laboratory, Inc.

2 Chambers Street

Binghamton, NY 13903

Tel. (607) 723-3512

IC Information (For Canadian Customers)

1. PRODUCT:

This product contains IC : 11012A-BC11X

This product complies with RSS-210 of Industry Canada.

Operation is subject to the following two conditions: (1) this

product may not cause harmful interference, and (2) this product

must accept any interference received, including interference

that may cause undesired operation. This Class B digital

apparatus complies with Canadian ICES-003.

2. CAUTION:

To reduce potential radio interference to other users, the

antenna type and its gain should be so chosen that the equivalent

isotropically radiated power (e.i.r.p.) is not more than that

permitted for successful communication.

Informations sur IC (pour les clients Canadiens)

1. APPAREIL:

Cet appareil contiens IC : 11012A-BC11X

Cet appareil est conforme à la norme CNR-210 du Canada.

L’utilisation de ce dispositif est autorisée seulement aux deux

conditions suivantes : (1) il ne doit pas produire de brouillage,

et (2) l’utilisateur du dispositif doit être prêt à accepter tout

brouillage radioélectrique reçu, même si ce brouillage est

susceptible de compromettre le fonctionnement du dispositif.

Cet appareil numérique de la classe B est conforme à la norme

Important Safety Information is supplied in a separate document “Important Additional Operation Information Guide ”

NMB-003 du Canada.

2. ATTENTION:

An de réduire le risque d’interférence aux autres

utilisateurs, il faut choisir le type d’antenne et son gain de façon

à ce que la puissance isotrope rayonnée

équivalente (p.i.r.e.) ne soit pas supérieure au niveau requis pour

l’obtention d’une communication satisfaisante.

Canadian Customers:

CAN ICES-003 (B)/NMB-003 (B)

RF Exposure Information

This equipment complies with FCC/IC radiation exposure limits

set forth for an uncontrolled environment and meets the FCC

radio frequency (RF) Exposure Guidelines in Supplement C to

OET65 and RSS-102 of the IC radio frequency (RF) Exposure

rules. This equipment has very low levels of RF energy that are

deemed to comply without testing of specic absorption ratio

(SAR).

Cet équipement est conforme aux normes d’exposition aux

radiations FCC/IC dénies pour un environnement non contrôlé

et satisfait les directives d’exposition à la radiofréquence

(RF) dans le supplément C des OET65 et RSS-102 des règles

d’exposition à la fréquence radio (RF) IC. Cet équipement a de

très faibles niveaux d’énergie RF qui sont jugés conformes sans

test de taux d’absorption spécique (SAR).

R&TTE(EN) Information

1. DECLARATION OF CONFORMITY

Our products follow the provisions of EC/EU directives:

LV: 2006/95/EU

EMC: 2014/30/EU

RoHS: 2011/65/EU

ErP: EC regulation 1275/2008 and its frame work

directive 2009/125/EC

2. IMPORTANT NOTICE:

DO NOT MODIFY THIS PRODUCT

This product, when installed as indicated in the instructions

contained in this manual, meets R&TTE directive requirements.

Modication of the product could result in hazardous Radio and

EMC radiation.

3. CAUTION:

Separation distance of at least 20cm must be maintained between

this product and all persons.

This product and its antenna must not be co-located or operating

in conjunction with any other antenna or transmitter.

Before You Begin, Read This!

We understand that you're eager to get started using

your McIntosh, but to make sure you have the best

possible experience up front, we highly recommend

taking some time to thoroughly read through this

manual and any included documentation. This will

help to answer any questions you may have and make

sure you stay safe and don't run into any issues that

will prevent you from getting started quickly.

We have designed this manual to make sure your

excitement doesn't wane by the time you fire up

your unit. Experienced McIntosh users will find this

manual as a valuable reference, while newer users will

find it comprehensive enough to get started smoothly

and effectively. As you read through the manual, you

will find that everything is laid out intuitively, and

everything is written succinctly and efficiently. We

want you to spend less time reading, and more time

listening.

If you are an experienced user and are confident in

your ability to quickly get started on your own, you

will find connection diagrams on Page 6 to help guide

you along.

You are absolutely free to reach out to us to ask any

questions or provide feedback about any aspect of

your McIntosh experience. You can reach us via the

contact information on the next page.

Thank you from all of us at McIntosh

You have invested in a precision instrument that will

provide you with many years of enjoyment. For the

best experience and your safety, please be sure to heed

and comply with the instructions and warnings found

throughout the included documentation.

If you need further technical assistance, please contact

your dealer who may be more familiar with your

particular setup including other brands. You can also

contact McIntosh with additional questions or in the

unlikely event of needing service.

McIntosh Laboratory, Inc.

2 Chambers Street

Binghamton, New York 13903

Technical Assistance: ..(607) 723-3512

Fax: (607) 724-0549 ............................

Customer Service: ......(607) 723-3515

Fax: (607) 723-1917 ............................

Email: support@mcintoshlabs.com .....

Website: mcintoshlabs.com ................

Make a Note

For future reference, you can jot down your serial

number and purchase information here. We can

identify your purchase from this information if the

occasion should arise.

Serial Number:

Purchase Date:

Dealer Name

Contents

Trademark and License Information 4 .....................

Dimensions ................................................................4

Installation ................................................................5

Connecting Devices (Diagrams) 6 .............................

Input and Control: 6 .................................................

Output and Loudspeakers: ....................................7

Navigating the Rear Panel 8 .......................................

Connector and Cable Information 9 .........................

Connecting Loudspeakers .......................................10

Preparing the Output Terminal Posts: ..................10

Preparing Your Speaker Wire: .............................10

Connecting Speakers (Bare Wire): ......................10

Connecting Speakers (Banana Plug): ..................10

Connecting Speakers (Spade Lug): ......................10

Navigating the Front Panel .....................................11

Navigating the Remote Control ..............................12

Setting Up Your MA9500 ........................................13

Using Knobs for Menu Navigation: ......................13

Entering Setup Menu: ......................................13

Entering Trim Functions Menu: .......................13

Selecting/Adjusting Menu Settings: ..................13

Exiting/Navigating Back: .................................13

The Setup Menu: ...................................................13

Input Settings: ..................................................13

Output Settings: ...............................................13

Power Control Triggers Settings: ....................14

Data Ports Settings: .........................................14

Passthru Settings: ............................................14

HDMI CEC Settings: ........................................14

HDMI Lip Sync Mode Settings: .......................14

Digital Gain Settings: ......................................14

USB Automute Settings: ...................................14

Comm Port Baud Rate Settings: ......................14

IR Codes Settings: ............................................14

IR Sensor Settings: ...........................................15

Power Saving Settings: ....................................15

Factory Reset: ..................................................15

Using Your MA9500 ................................................15

Powering On/Turning Off: ...................................15

Selecting an Input for Playback: ..........................15

Adjusting the Volume: .........................................15

Adjusting Trim Functions: ....................................15

Adjusting Audio Balance: ................................15

Enabling/Disabling the Equalizer:...................15

Adjusting Input Trim Levels: ............................15

Adjusting Phono Resistance (Turntables): .......15

Toggling Stereo/Mono: .....................................15

Toggling the Meter Backlights: ........................15

Adjusting Display Brightness: .........................15

Enabling/Disabling HXD: ................................15

Muting the Audio: ................................................15

Getting the Most Out of Your MA9500 .................16

Using the Autoformer: ..........................................16

Using the Eight-Band Equalizer: ..........................16

Using Bi-Amplification on Loudspeakers: ...........16

Using the HXD with Headphones: .......................16

Listening Worry-Free (Auto Protection): ..............16

Using the Onboard Power Amplifier: ...................16

Using External Power Amplifiers: ........................16

Using MA9500 with External Amp: .................16

Using Only External Amps:..............................16

Using Audio Passthru: ..........................................16

Viewing Coax/Optical Inputs Sample Rate: .........16

Using USB Playback: ............................................16

Installing the Software: ....................................17

Frequently Asked Questions ...................................17

Amplifier Specifications ..........................................18

Digital Audio Specifications....................................18

General Specifications .............................................19

Packing Instructions ................................................19

MA9500 Packing Material List ..............................19

Specyfikacje produktu

Marka:	McIntosh
Kategoria:	odbiornik
Model:	MA9500

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z McIntosh MA9500, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje odbiornik McIntosh

McIntosh C2800 Instrukcja

4 Października 2024

McIntosh C55 Instrukcja

4 Października 2024

McIntosh C53 Instrukcja

3 Października 2024

McIntosh MA7200 Instrukcja

2 Października 2024

McIntosh MC-225 Instrukcja

1 Października 2024

McIntosh C1100C Instrukcja

20 Września 2024

McIntosh MC830 Instrukcja

15 Września 2024

McIntosh MA252 Instrukcja

13 Września 2024

McIntosh DA2 Instrukcja

11 Września 2024

McIntosh MC-75 60th Anniversary Edition Instrukcja

8 Września 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Yamaha RX-V383 Instrukcja

11 Grudnia 2024

AVMATRIX SD1121-12G Instrukcja

11 Grudnia 2024

AVMATRIX SD1191 Instrukcja

11 Grudnia 2024

ButtKicker BKA1000-P Instrukcja

11 Grudnia 2024

Phonic NT2504 Instrukcja

11 Grudnia 2024

Phonic DMA8825 Instrukcja

11 Grudnia 2024

Phonic MAX 1000 Instrukcja

11 Grudnia 2024

Phonic XP 5000 Instrukcja

11 Grudnia 2024

Phonic Xtrix 4100 Instrukcja

11 Grudnia 2024

Phonic ICON 300 Instrukcja

11 Grudnia 2024