Instrukcja obsługi MB Quart MBQX-POD-1

MB Quart głośnik MBQX-POD-1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla MB Quart MBQX-POD-1 (24 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/24
CAN-AM MAVERICK X3
400 WATT / TWO SPEAKER
UTV-TUNED AUDIO PACKAGE
Installation Manual
MBQX-POD-1
2
Thanks for choosing MB QUART! The UTV-Tuned 2-speaker, 400 watt system for applicable Can-Am
Maverick X3 vehicles (2017 and up) is engineered for your vehicle. The installation process is simple and
straightforward. Installation following these detailed instructions can be completed in about 2 hours.
INSTALLATION OVERVIEW VIDEO
Many of our vehicle-specic products feature
a “how to” install video with additional details
on making your installation successful.
Where available, locate your specic video
on the website. Type your model number
(MBQX-POD-1) into the search box, then
click on the INSTALL & SUPPORT tab.
WHAT’S INCLUDED
As you unpackage the MBQX-POD-1 system, account for all components before attempting installation.
Please note some components required to complete an audio system in your Can-Am X3 (such as a
source unit, amplier power/ground wiring, fuse/fuse holder, speaker wiring, RCA audio cable, etc.)
are not included. See page 6 for details of what else you’ll need.
What’s In The Box?
● Compact 2 channel, Class D 400 Watt Amplier*
● Two Dash Panel-Mounted 6.5 inch Coaxial Speakers in Vehicle-Specic Replacement Panels
*Optional Amplier Mounting Plate (MBQX-SUB-ACC-1) is found at MBQuart.com
*AMPLIFIER MOUNTING – An amplier mounting plate (MBQX-SUB-ACC-1) to safely
mount the NA2-400.2 amplier to the Can-Am front cage behind the driver side dash is
available at MBQuart.com. If not using this amplier mounting plate, you need to determine
and accomplish your own amplier mounting strategy. Instructions on this accessory
mounting plate and how to install this kit are included in this manual.
NOTE – Do not dispose of any packaging until you have completely installed your system and are certain
you have accounted for every piece. If you feel something is missing, please contact Maxxsonics directly
via email – support@maxxsonics.com.
OTHER CAN-AM X3 SPECIFIC PRODUCTS – MB Quart has thoughtfully created a range of vehicle-
specic audio system products for your Can-Am X3. Everything from source units to subwoofers is available
at www.MBQuart.com. See page 16 for details.
WARRANTY
Your audio system is covered by a 1 year warranty from the date of invoice. It is important to retain your
sales receipt. Furthermore, it is crucial that you record and store a record of the serial numbers for each of
the components that are included in your system. In the rare instance that a warranty claim is needed both
proof of purchase and serial numbers are required. Additional information on the back page.
TECHNICAL SUPPORT
For additional technical information, go to the “SUPPORT” tab at MBQuart.com. There you will nd helpful,
FAQ, TEQ Tips and you can contact Technical Support via email.
INTRODUCTION
MBQX-SUB-
ACC-1
3
PRE-INSTALLATION
INSTALLATION TIME
About 2 hours are required to complete this installation (assuming unmodied vehicle). Add installation time
for your own source unit, choice in power wiring and any additional speakers, subwoofer(s) and ampliers.
TOOLS AND SUPPLIES NEEDED
● Wire Strippers and Crimpers ● Phillips Screwdriver
● Flush Cut Wire Cutters (for trimming zip ties) ● Small, Straight (Jeweler’s) Screwdriver
● High-Quality Electrical Tape ● Heat Gun or Lighter
● Hand-Held Battery-Powered Drill, 9/64” & 1/8” Drill Bits ● Bojo Tools (Non-Marring Pry Tools)
● Ratchet, 8mm Socket ● 10mm Socket (Gauge Cluster/Battery)
● 13mm Socket and 13mm Box Wrench (Seat Removal) ● 18mm Socket (Seat Removal)
● 1/2” Socket (Subwoofer Enclosure Front Brackets) ● 7/16” Socket (Optional 3rd Amp Plate)
● T-25 and T-27 Torx Drivers (Dash & Housing Hardware) ● T-30 Torx Driver (Dash/Console)
You may or may not need all of the tools listed above. You may also own more specialized tools to complete
the installation. Share the pics of your installation on our social media channels to help others.
In addition to the tools listed, have music ready for INITIAL TESTING and FINE TUNING steps. The format
of music will depend on your choice of source unit (USB stick, Bluetooth, AM/FM, etc.).
SAFETY PRECAUTIONS
Safely prepare your vehicle for the installation before proceeding.
● Turn the ignition off and remove the key
● Use a packing blanket other soft material to protect your machine
● Safety Glasses - always wear eye protection
● Once all of the seats are removed, disconnect the negative battery cable before proceeding
PREPARATION FOR INSTALLATION & DISASSEMBLY
Before fully dismantling your vehicle, we suggest you prepare all components, speaker panels and wiring.
It increases efciency to have everything ready when each component is installed. Seat removal is
recommended as bus bar access in the center console for amplier power & ground is important. Please
note some models with seat belts will require seat belt attachment point removal to remove the whole seat.
REMOVE SEATS - DISCONNECT BATTERY
123
Slide driver’s seat forward
and remove two 18mm bolts
securing the rear of the seat
frame. If the vehicle has
factory-installed seats, you
can also access these bolts by
ipping up the seat cushion (a
socket extension is required).
Slide driver’s seat back to
access front 13mm through-
bolts and nuts. Using a socket
and box wrench, remove inner
and outer front seat hardware.
Unplug seat belt sensor.
Remove front driver’s seat and
set aside with all hardware.
Repeat seat removal on
front passenger’s side (and
rear seats - if present). Once
passenger seat near battery is
removed, disconnect (black)
negative battery cable by
removing a 10mm bolt and set
the negative cable aside.

Specyfikacje produktu

Marka: MB Quart
Kategoria: głośnik
Model: MBQX-POD-1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z MB Quart MBQX-POD-1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik MB Quart

MB Quart

MB Quart FKB113 Instrukcja

9 Października 2024
MB Quart

MB Quart FKB110 Instrukcja

9 Października 2024
MB Quart

MB Quart FKB116S Instrukcja

9 Października 2024
MB Quart

MB Quart FKB116 Instrukcja

9 Października 2024
MB Quart

MB Quart FKB169 Instrukcja

9 Października 2024
MB Quart

MB Quart FKB168 Instrukcja

9 Października 2024
MB Quart

MB Quart NHT2-116 Instrukcja

7 Października 2024
MB Quart

MB Quart Discus DK2-116S Instrukcja

7 Października 2024
MB Quart

MB Quart Discus DK2-169 Instrukcja

7 Października 2024
MB Quart

MB Quart Discus DK2-146 Instrukcja

7 Października 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Bowers & Wilkins

Bowers & Wilkins LCR3 Instrukcja

15 Stycznia 2025
Hifonics

Hifonics Vulcan VX6.2E Instrukcja

15 Stycznia 2025
Pyle

Pyle PLRGSW64BK Instrukcja

15 Stycznia 2025
ION

ION Insta Sound Instrukcja

15 Stycznia 2025
Pure Acoustics

Pure Acoustics QBT-340 Instrukcja

15 Stycznia 2025
Yamaha

Yamaha WX-010 Instrukcja

15 Stycznia 2025
Polk

Polk REACT SOUND BAR 1 Instrukcja

15 Stycznia 2025
Sennheiser

Sennheiser AMBEO Soundbar Plus SB02M Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-25 Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-35 Instrukcja

15 Stycznia 2025