Instrukcja obsługi Maytag XHS1000XX
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Maytag XHS1000XX (12 stron) w kategorii suszarka. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/12
Adjustable Clothes Rack Installation Instructions
Porte-vêtements réglable – Instructions d’installation
Table of Contents
TOOLS AND PARTS .........................................................1
USE AND LOCATION REQUIREMENTS ...........................2
ASSEMBLY INSTRUCTIONS ................................................2
INSTALLATION INSTRUCTIONS .........................................5
WARRANTY 6..............................................................................
OUTILLAGE ET PIÈCES ..................................................7
UTILISATION ET EMPLACEMENT
D’INSTALLATION – EXIGENCES À RESPECTER 8 ...........
INSTRUCTIONS D’ASSEMBLAGE .....................................8
INSTRUCTIONS D’INSTALLATION ...................................11
GARANTIE ..............................................................................12
W10103459C
TOOLS AND PARTS
Gather the required tools and parts before starting installation.
#2 Phillips screwdriver
Parts Included:
Adjustable Clothes Rack
main assembly (1)
Hanger arms (2)
Screws (4*)
* 3 used for assembly
+ 1 spare
Arm support collar (1)
Top cap (1) Top washer (1)
Top cap spring (1)
Adjustable Clothes Rack foot
assembly (1)
Table des matières
Tools needed:
Bagged together
Bagged together
2
Top cap
Spring
Top washer
Hanger arms
Arm support collar
Top pole
Mid pole
Base pole
Magnetic arms
Pressure plate
Height adjuster
Foot
Foot
assembly
The Adjustable Clothes Rack can be installed onto most full
size front load or top load washers or dryers in the following
congurations:
Select the side of the washer or dryer that you plan to install
the Adjustable Clothes Rack based on the spacing requirements
noted above.
IMPORTANT: The Adjustable Clothes Rack has a maximum
weight limit of 20 lbs (9.07 kg).
USE AND LOCATION
REQUIREMENTS
Typical top-load
installation
Typical front-load
installation
Typical front-load
with pedestal
installation
Typical stacked
front-load installation
KEY PARTS
Top pole
release button
Mid pole
release button
Spacing Requirements
39"
(991 mm)
12.5"
(318 mm)
79"
(2007 mm)
12.5"
(318 mm)
3"
(76 mm)
NOTE: The Adjustable Clothes Rack requires 3" (76 mm)
clearance side to side to enable it to t between the washer
and dryer or between the washer/dryer and the wall.
3
ASSEMBLY INSTRUCTIONS
1. Extend mid-pole
Press the release buttons at the bottom of the base pole,
and grasping the mid-pole, extend it upward until it locks
into place.
2. Attach foot assembly to base pole
Insert the base pole into the foot assembly, as shown. Align the
hole in the foot with the pilot hole in the base pole and secure
with one of the included screws. If the hole in the foot is not
visible, turn the Height Adjuster counterclockwise until the hole
in the foot is visible.
NOTE: There may be some resistance when the screw starts
threading into the hole. This is normal.
4. Release and extend top pole
Press the release buttons on the mid pole and extend top pole
until it locks into place.
5. Slide arm support collar onto
top pole
Slide the arm support collar onto the top pole, and down past
the release buttons on the top pole. Be sure the toothed end
is facing UP, as shown.
NOTE: To allow proper installation of the hanger arms, the
arm support collar must be below release buttons until the
rest of the hanger arm assembly is complete.
Release
buttons
Base pole
Base pole
Pilot hole
Foot
Screw
3. Lower mid-pole (optional)
To simplify assembly of the hanger arms to the top pole, you
may want to lower the mid pole back into its lowered position.
Press the release buttons at the top of the base pole,
and slide the mid-pole into the base pole.
Release
buttons
Release
buttons
Top pole
Mid pole
Release
buttons
Arm support
collar
Top pole
Mid pole
Mid pole
Height
adjuster
Specyfikacje produktu
| Marka: | Maytag |
| Kategoria: | suszarka |
| Model: | XHS1000XX |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Maytag XHS1000XX, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje suszarka Maytag
28 Maja 2024
Instrukcje suszarka
- suszarka Samsung
- suszarka Electrolux
- suszarka AEG
- suszarka Beko
- suszarka Teka
- suszarka LG
- suszarka Smeg
- suszarka Gram
- suszarka Amica
- suszarka Gorenje
- suszarka Cookology
- suszarka Bosch
- suszarka Candy
- suszarka Whirlpool
- suszarka Miele
- suszarka Midea
- suszarka Lamona
- suszarka Panasonic
- suszarka Hoover
- suszarka GE
- suszarka Siemens
- suszarka Grundig
- suszarka Haier
- suszarka Remington
- suszarka Fisher & Paykel
- suszarka Indesit
- suszarka Hotpoint
- suszarka Amana
- suszarka Hotpoint Ariston
- suszarka Corbero
- suszarka Zanussi
- suszarka Continental Edison
- suszarka SVAN
- suszarka AEG-Electrolux
- suszarka Omega
- suszarka VOX
- suszarka Vedette
- suszarka Frigidaire
- suszarka Daewoo
- suszarka SanGiorgio
- suszarka Magic Chef
- suszarka Constructa
- suszarka Proline
- suszarka KDK
- suszarka Speed Queen
Najnowsze instrukcje dla suszarka
26 Września 2024
23 Września 2024
22 Września 2024
17 Września 2024
17 Września 2024
5 Września 2024
9 Lipca 2024
9 Lipca 2024
9 Lipca 2024
8 Lipca 2024