Instrukcja obsługi Maxsa 40242

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Maxsa 40242 (3 stron) w kategorii Niet gecategoriseerd. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/3
1. To access the battery compartment, twist open the back half
of the light counterclockwise.
2. Remove the battery compartment cover by squeezing the
two tabs on the cover inward. 5. Reassemble the Motion-Activated Anywhere Light by twisting
the back half of the light clockwise tightly to ensure a weather
proof seal.
4.
3.Totally portable and weatherproof.
Perfect outdoors for doors, steps, decks, sheds, garages,
pathways, porches, and anywhere additional light is needed.
Also perfect indoors for hallways, stairways,closets, and
bathrooms.
Built-in motion sensor automatically turns on the light when
movement is detected in the area. The light remains on while
motion continues to be detected in the area.
Built-in photosensor enables the light to only turn on at night.
The 4 super bright LEDs have an estimated life of 30,000 hours,
so they never need changing.
D
40240, 40241
ANYWHERE LIGHT
motion-activated
ABOUT YOUR MOTION-ACTIVATED ANYWHERE LIGHT
Anywhere
Requires 4 D cell batteries (not included). The batteries typically
last up to 1 year under normal use.
TM
TM
TM
TM
1. In order to mount the light securely to a wall or other stable
surfaces, the mounting base needs to be installed. Slide the
the mounting place to separate it from the main body.
2. If you are installing the mounting place on a very hard
surface, you may need to drill holes for the screws first.
The included screw anchors can be used for drywall,
cement, brick, or similar surfaces.
3. Use the two screws supplied to install the mounting plate.
1. Align the base to the mounting plate. Slide the main body
onto the mounting plate until it snaps into place.
At night, the LED lights will remain on for approximately 40
seconds after the last detected movement. If a movement is
detected while the lights are on, the light duration will be reset
and remain on for another 40 seconds.
Depending on your preferences, you can rotate the base on
the mounting plate or make the motion sensor and the light
swivel to aim at different directions.
because
25 feet
fresh
Anywhere
Anywhere
Anywhere
Anywhere
Anywhere
Anywhere
TM
TM
TM
TM
TM
TM
3
3
approx. 40 seconds
v10.1
2010
info@maxsainnovations.com

Specyfikacje produktu

Marka: Maxsa
Kategoria: Niet gecategoriseerd
Model: 40242

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Maxsa 40242, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niet gecategoriseerd Maxsa

Maxsa

Maxsa 44640 Instrukcja

9 Października 2024
Maxsa

Maxsa 44449-L Instrukcja

9 Października 2024
Maxsa

Maxsa 43319-X Instrukcja

9 Października 2024
Maxsa

Maxsa 44641 Instrukcja

9 Października 2024
Maxsa

Maxsa 40241 Instrukcja

9 Października 2024
Maxsa

Maxsa 40242 Instrukcja

9 Października 2024

Instrukcje Niet gecategoriseerd

Najnowsze instrukcje dla Niet gecategoriseerd

DeWalt

DeWalt DWV015 Instrukcja

10 Października 2024
IFM

IFM OJ5030 Instrukcja

10 Października 2024
Shark

Shark ION Robot RV765 Instrukcja

10 Października 2024
Crivit

Crivit IAN 351556 Instrukcja

10 Października 2024
BenQ

BenQ PH460 Instrukcja

10 Października 2024
Livarno

Livarno IAN 368684 Instrukcja

10 Października 2024
CyberPower

CyberPower PR1000ELCDRT2U Instrukcja

10 Października 2024
IMC Toys

IMC Toys 250253 Instrukcja

10 Października 2024