Instrukcja obsługi Matsui 1420T(B)
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Matsui 1420T(B) (2 stron) w kategorii telewizor. Ta instrukcja była pomocna dla 22 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/2
Inserting batteries into the Remote
Control
Instructions
1
Matsui 1420T(B)/1420TSIL(B)
Damage
Never use your TV if it is damaged in
any way. Always place your TV on a flat
level surface avoiding anywhere which
may be subject to strong vibration.
Weather
It is advisable to unplug the aerial during
an electrical storm.
Moisture
Do not allow your TV to be exposed to
rain, moisture, dust. If any liquid is spilt
into your TV it can cause serious
damage. If you spill any liquid into your
TV switch it off at the mains immediately.
Contact your store.
Interference
Do not place your TV on or near
appliances which may cause
electromagnetic interference (TV or Hi-Fi
speakers). If you do, it may adversely
affect the working of the unit, and cause
a distorted picture or sound.
Temperature
Avoid extremes of temperature, either hot
or cold, place your TV well away from
heat sources such as radiators or
gas/electric fires.
Ventilation
The TV must be well ventilated. Do not
cover your TV or place it inside a small
confined space. Make sure that there is a
gap of at least 10cm on both sides and
20cm at the top.
Batteries
Batteries are easily swallowed by young
children. Do not allow young children to
play with the remote control unit.
Covers
Do not remove any fixed covers as this
may expose dangerous voltages.
Standby
The standby button on the remote control
doesn't switch off the TV completely and
the TV will continue to draw electricity
from the mains supply. Therefore in the
interests of safety and to avoid
unnecessary energy consumption, never
leave your TV in standby while
unattended for long periods of time, eg.
overnight, while on holiday or while out
of the house.
Naked Flames
Naked flames such as candles and night
lights should not be placed on or near
your TV.
Ornaments
Vases and other water containers or
lamps should not be put on top of your
TV set.
Power Cord
Make sure your TV or TV stand is not
resting on top of the power cord, as the
weight of the TV may damage the cord
and create a safety hazard.
Packaging
If you can store the packaging it will
prove useful should you need to transport
the TV to protect it while it is in transit.
Try to reuse packaging wherever you
can. If you cannot store it, contact your
local authority for details of your nearest
recycling facilities.
Switch on your TV and any
other connected equipment/
Automatic Tuning System
3
Adjusting the picture settings
7Setting the sleep function
The sleep function allows you to automatically switch your
television into standby after a preset amount of time (up to
120 minutes). In addition should you fall asleep or leave your
TV unattended it will automatically switch into standby 15
minutes after the end of transmissions.
To set the sleep timer press SLEEP.
SLEEP 120 will appear on screen.
The display will clear in four seconds and your television
will switch off automatically after 120 minutes.
Repeated presses of SLEEP will decrease the sleep timer
in 10 minute intervals from 120 minutes to 10 minutes.
1st press 120 minutes.
2nd press 110 minutes.
. . .etc. . . . 100, 90, 80.
When you have set the sleep timer your TV will return to
a normal picture and automatically switch off after the
preset sleep time.
To cancel the sleep timer set the sleep timer to 0.
The display will clear in four seconds and your television
will not switch off automatically.
Make sure that your TV and aerial are properly
connected.
Plug your TV and any other equipment that you have
connected to your TV into the mains and switch on at
the wall.
ONLY WHEN YOU TURN ON THIS SET FOR THE
FIRST TIME, THE AUTOMATIC TUNING PROCESS
WILL BE AVAILABLE.
1. Press the switch on the front of the TV, thePOWER
red standby indicator will light.
Switch on your television by pressing STANDBY
on the remote control. (The standby light will go out
when the TV is on.)
2. Press ENTER. Your TV will now automatically tune in
all available channels.
When the programme on the screen stops changing
and the sound comes on, the tuning process is
complete.
Select your language
4
Tune the channels
5Sort the channels
The picture settings have been adjusted by the factory under
optimum signal reception conditions, however conditions may
not be the same in your area. After turning on your television,
allow it to warm up for a few minutes before making any
adjustments. Should you wish to reset picture controls back to
factory settings press NORMAL.
Press MENU on your remote control. The main control
menu will appear.
Press CH/PAGE/ on your remote control to
highlight picture.
Press ENTER to view brightness.
Press CH/PAGE /to view the contrast, colour or
sharpness on screen displays.
Press or VOL + - to adjust the levels.
Pictures appear sharpest in the daytime by increasing
the contrast. In the evening (when surroundings are
darker) the sharpest picture can be obtained by
reducing the contrast.
Press MENU twice to remove the picture menu.
If you do not make an adjustment within 1 minute the menu
will disappear.
1. Press MENU. The main control menu will appear.
2. Press CH/PAGE /on your remote control to highlight
CH tuning.
3. Press ENTER. The CH tuning on screen display will appear.
4. Press CH/PAGE /on your remote control to highlight
CH allocation.
5. ENTERPress . The CH allocation on-screen display
will appear and the current channel position for the
programme on the TV screen will appear in the top
right corner of the screen.
6. Press CH/PAGE /on your remote control to find a
programme with a clear reception. Press ENTER.
7. Press CH/PAGE /to select the channel number that
you want this programme to be stored in.
For example if the TV has automatically stored a BBC2
programme in channel number 6, you will need to change
the channel allocation number (in the middle of the screen)
to 2 using the CH/PAGE /buttons on your remote
control. (If no channel is allocated, the on-screen
display will disappear after 1 minute.)
8. Press ENTER once so that the channel number you have
allocated to this programme is stored (the channel will now
have changed position).
Repeat this process until you have allocated a channel number
to all the programmes on your TV with the clearest reception.
9. Press MENU 3 times to remove the on-screen displays from
the TV screen.
Press MENU on your remote control. The main control menu
will appear on your TV screen.
Press CH/PAGE/ on your remote control to highlight CH
tuning. Press to confirm. ENTER The CH tuning on-screen
display will appear.
Press CH/PAGE/to highlight auto. Press ENTER to
confirm. This will start the automatic tuning process.
This process will take a few minutes to complete. . .
please be patient.
When the programme on the screen stops changing and the
sound comes on, the tuning process is complete.
Press MENU twice to clear the display.
Since each programme may be picked up by your TV on more
than one frequency the auto tune process will probably store
more than one of each channel. For example there may be
three BBC 2’s. This means that once the automatic tuning
process is complete you will need to allocate a channel number
to the programmes with the clearest reception. To do this go to
the next step - Sorting Channels...
This feature allows you to select the language you want
to appear on your TV on-screen display.
Press MENU on the remote control. The main control
menu will appear on your TV screen.
Press CH/PAGE /to select Language menu.
Press ENTER to select Language screen.
Press CH/PAGE /to select desired language.
Press ENTER to store your setting.
Press MENU to clear the screen.
CONNECT AERIAL TO TV
THEN PRESS ENTER TO
START AUTO TUNING
AUTO TUNING
BRIGHTNESS 0
6 8
If you have a VCR connected make sure that it is
switched on and a video tape is playing. . . your TV
screen will be fuzzy.
If you have a Satellite/Cable box system or games
console connected make sure that it is switched on.
Make sure your Satellite/Cable box has Sky News
selected. . . your TV screen will be fuzzy. Please refer to
your Satellite/Cable instruction book to see how to
select Sky News.
All connections must be made with the power disconnected.
Connect an external aerial ) to the(not supplied
aerial socket on the back of your TV.
A
B
C
Connect an aerial lead to the socket marked(not supplied)
RF IN on the back of your VCR.
A
Connect an RF lead to the socket marked RF OUT on your
VCR (not supplied) and the other end to the aerial socket
on your TV.
If you have a scart lead we recommend that you use one.
Connect it to the scart socket on the back of your TV and
one of the scart sockets on the back of your VCR.
Connect your TV to an aerial Connect your TV to an aerial and VCR
Follow either instruction i) or ii) below:
2
B
C
A
i) ii)
OR
Once you have tuned in and sorted all the channels you want to
watch, you will be able to select them by pressing the numbered
buttons on your remote control or by pressing CH/PAGE /to
select channels in sequence: eg. 1,2,3,4,5 etc...
J3M43701A V ’03.10
AUTO TUNING
Specification
Model No. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Matsui 1420T(B)/1420TSIL(B)
Picture tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14” (34 cm visible) measured diagonally
Colour system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAL I
Aerial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Loop aerial or 75 Ohm external aerial
Scart socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 x 21 pin
Audio output power . . . . . . . . . . . . . . . . . . . . . . . . . . .1.0W
Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3”(8 cm) 8Ohms
Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .AC 230V 50Hz
Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . .44W (7W in standby)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9.5Kg
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .362(W) x 360(D) x 320.5(H)mm
Manual tuning
9
Fault finding guide
Teletext functions
10
Select the TV channel you want to manually tune.
Press MENU on your remote control. The main control menu will appear.
Press CH/PAGE /on your remote control to highlight CH tuning.
Press ENTER on your remote control to confirm.
The CH tuning on screen display will appear.
Press CH/PAGE /to highlight manual. Press ENTER to confirm.
Press VOL + to search up the waveband or VOL – to search down the waveband.
Each time a station is found the search will stop.
Press VOL + or – to continue searching until the station you want is found.
Press FINE TUNING +/- to find the clearest picture.
Press ENTER to store the station you selected.
Press CH/PAGE /to select your required channel number (1~80).
Press ENTER to store the channel number.
Repeat this process to tune in other channels.
Press MENU three times to remove the tuning menu.
If at a later date you wish to skip an unwanted channel when using CH/PAGE /, press SKIP on the remote control.
The channel number will flash when skip is selected for that channel.
To cancel the skip function, type in the channel number i.e. 2 and press . The channel number will stop flashing.SKIP
In certain areas with poor reception, the Automatic Tuning System may not tune your
television to the strongest broadcast signal. If you are not satisfied with the automatic
tuning you may manually tune your television to obtain the best possible picture and
sound.
PRESS: +/-/ENTER/MENU
CH1
To view Teletext press TEXT/MIX/TV
1st press . . . .text only
2nd press . . . .text and TV picture
3rd press . . . .TV picture only
Press the four COLOURED FASTEXT
buttons to move around the teletext
pages with greater ease and speed
Press RESET to return to the INDEX
page while you are in teletext mode.
Press NORMAL to reset picture controls back to factory settings.
Press F/T/B to increase the size of the text on screen.
1st press . . . .View the top of the page
2nd press . . . .View the bottom of the page
3rd press . . . .Return to full view of the page (text normal size)
Press STATUS/HOLD to freeze a page.
The hold symbol will appear in the top left corner of the screen.
Press STATUS/HOLD a second time to release page.
Pages and sub-pages are transmitted in sequence with an adequate pause for reading each page. You may
freeze a page which is of particular interest and hold it on screen. Information cannot be updated when
page/sub-page is held using hold.
Press SUB PAGE to view a sub-page. 4 dashes will appear; if you do not enter any numbers they
may only be removed by pressing TEXT/MIX/TV.
Select the desired sub-page number,
e.g. sub page number 2 press by pressing the direct channel entry buttons.0 0 0 2
Whilst using subpages it is essential to enter four numbers.
Using sub page you may view and hold a page or sub-page; as information is received from the transmitter
the screen will be updated, e.g. a page of share prices.
Press QUICK VIEW to switch between the current channel and the last channel selected.
Press SKIP/REVEAL to display hidden text.
Some pages contain hidden text, e.g. a quiz page with concealed answers.
Press DISPLAY CANCEL then enter your page number.
This function enables the TV picture to be viewed whilst a selected page is being
located. Once found the page number will be displayed in the top left of the TV picture.
Press TEXT/MIX/TV to view the selected page.
All Teletext pages are three digit numbers e.g. to select page 100, press 100, then , then .
If you accidentally press a wrong button, complete the sequence with any three numbers, then re-enter the
correct number.
Press CH/PAGE /to advance pages sequentially up or down.
SYMPTOM CAUSE SOLUTION
No standby light. Is your TV plugged in ?
Is the main power switch on the front of your TV off?
Has the fuse in the mains plug blown?
Plug your TV into mains socket (AC outlet).
Press the main power switch.
Replace fuse in mains plug.
No picture, no sound. Is your TV plugged in ?
Is the aerial connection lead broken or damaged?
Possibly station trouble.
Is the main power switch on the front of your TV off?
Have you pressed mute or have you set the volume
at minimum.
Plug your TV into mains socket (AC outlet).
Move the aerial away from possible source of interference. If you live in a
known poor reception area try using an aerial booster to improve the
quality of broadcast signal.
Check aerial connection for broken or damaged wire. If necessary
replace with new lead.
Press the main power switch.
Press mute again or increase the volume using the volume control.
Unable to select channel numbers
up to 80.
During automatic tuning your television didn’t find
enough channels to place in these numbered
positions?
If a television station has been missed try repeating the automatic tuning.
Poor or no colour. Aerial or connection lead is not connected or lead is
damaged or broken.
Check all aerial connections for broken or damaged wires. If necessary
replace with new leads. Try using an aerial booster to improve the quality
of broadcast signal.
Colour control is not adjusted. Adjust colour
No Teletext or strange
characters letters on screen.
Aerial connection is poor or possibly station trouble. Check aerial connection for broken wires or try another channel.
Unable to playback video tapes. During automatic tuning your television you didn’t
have your VCR switched on, therefore your television
was unable to find it.
Remote control does not work or
operates erratically.
Weak or exhausted batteries. Replace batteries.
Before starting the automatic tuning operation make sure you have your
VCR switched on and a tape playing.
During automatic tuning your television didn’t find the
Satellite system.
Before starting the automatic tuning operation make sure you have your
Satellite system switched on and Sky News selected.
Unable to watch Satellite stations.
0870 90 90444
All calls charged at National Rate
Partmaster accessories and spares service can provide accessories, spares and replacement instruction books
for this and virtually any other domestic electrical item you may have - with most items being dispatched
within 24 hours!
We hope you enjoy your new Matsui 1420T(B)/1420TSIL(B). To help you get the most from your new
television, we recomment Partmaster Direct for accessories and spares.
Partmaster Direct’s range includes AV leads, Remote Controls, Mains Leads, Mains Adapters, Batteries and
much, mcuch more available for delivery direct to your door.
You can also log on to the Partmaster website.
1,000's of electrical accessories and spares at www.partmaster.co.uk
So whether you have lost it, broken it, need a replacement or an extra accessory, don't worry, we're here to
help!
Partmaster
Press INFO to display the current channel on the screen.
Press INFO again to turn off the display.
Press MENU to enter the main menu.
Press the MUTE button to turn off the
sound. Press the MUTE button again
to turn the sound back on.
Specyfikacje produktu
| Marka: | Matsui |
| Kategoria: | telewizor |
| Model: | 1420T(B) |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Matsui 1420T(B), zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje telewizor Matsui
23 Maja 2024
Instrukcje telewizor
- telewizor Samsung
- telewizor LG
- telewizor Sharp
- telewizor TCL
- telewizor Lenovo
- telewizor Philips
- telewizor Nokia
- telewizor Hisense
- telewizor Infiniton
- telewizor Panasonic
- telewizor Viewsonic
- telewizor Medion
- telewizor Lenco
- telewizor Toshiba
- telewizor Jensen
- telewizor Blaupunkt
- telewizor Vivax
- telewizor Salora
- telewizor Grundig
- telewizor Haier
- telewizor Soundmaster
- telewizor Hyundai
- telewizor Strong
- telewizor ECG
- telewizor Bang & Olufsen
- telewizor Furrion
- telewizor Funai
- telewizor CHiQ
- telewizor Thomson
- telewizor Velleman
- telewizor Pyle
- telewizor Nevir
- telewizor Arçelik
- telewizor Continental Edison
- telewizor NEC
- telewizor Polaroid
- telewizor AKAI
- telewizor Sanyo
- telewizor Telefunken
- telewizor Jay-Tech
- telewizor Bush
- telewizor Loewe
- telewizor VOX
- telewizor Element
- telewizor Denver
- telewizor Hitachi
- telewizor Technika
- telewizor Emerson
- telewizor Seiki
- telewizor Daewoo
- telewizor Metz
- telewizor XD Enjoy
- telewizor FFalcon
- telewizor Dyon
- telewizor Reflexion
- telewizor Megasat
- telewizor Finlux
- telewizor Palsonic
- telewizor Logik
- telewizor Luxor
- telewizor Mitchell & Brown
- telewizor SunBriteTV
Najnowsze instrukcje dla telewizor
26 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024