Instrukcja obsługi Martin RUSH MH 11 Beam

Martin Ulga RUSH MH 11 Beam

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Martin RUSH MH 11 Beam (48 stron) w kategorii Ulga. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/48
RUSH® MH 11 Beam
User Manual
Information subject to change without notice. HARMAN Professional Denmark ApS
disclaims liability for any injury, damage, direct or indirect loss, consequential or economic
loss or any other loss occasioned by the use of, inability to use or reliance on the
information contained in this document.
©2017 HARMAN Professional Denmark ApS. All rights reserved. Martin® and RUSH®
are registered trademarks of HARMAN Professional Denmark ApS registered in the
United States and/or other countries. Features, specifications, and appearance are
subject to change without notice.
Martin Professional • Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • www.martin.com
RUSH® MH 11 Beam User Manual: Revision C
Table of contents
Safety information...................................................................................... 5
Introduction .............................................................................................. 11
Before using the product for the first time .......................................... 11
Maximizing lamp life ........................................................................... 11
Physical installation ................................................................................. 12
Fastening the fixture to a flat surface ................................................. 12
Mounting the fixture on a truss ........................................................... 12
AC power ................................................................................................. 14
Linking fixtures to power in a chain .................................................... 14
Fixture overview....................................................................................... 16
Control data link....................................................................................... 17
Tips for reliable data transmission...................................................... 17
Connecting the data link..................................................................... 18
Fixture setup............................................................................................ 19
Using the control menus..................................................................... 19
Setting DMX address.......................................................................... 19
Lamp control settings ......................................................................... 20
Fixture settings ................................................................................... 21
Fixture information.............................................................................. 23
Position calibration ............................................................................. 24
Setting options by RDM ........................................................................... 24
Scanning for RDM devices on the data link ....................................... 24
Getting status and setting options by RDM........................................ 25
RDM functions .................................................................................... 25
Effects ...................................................................................................... 27
Dimming.............................................................................................. 27
Strobe effects ..................................................................................... 27
Pan and tilt.......................................................................................... 27
Colors ................................................................................................. 27
Gobos ................................................................................................. 28
Prism................................................................................................... 28
Focus .................................................................................................. 28
Frost.................................................................................................... 28
Maintenance ............................................................................................ 29
Cleaning.............................................................................................. 29
Replacing gobos................................................................................. 30
Lamp replacement.............................................................................. 32
Lamp temperature control .................................................................. 34
Replacing the primary fuse................................................................. 34


Specyfikacje produktu

Marka: Martin
Kategoria: Ulga
Model: RUSH MH 11 Beam

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Martin RUSH MH 11 Beam, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Ulga Martin

Instrukcje Ulga

Najnowsze instrukcje dla Ulga