Instrukcja obsługi Martin Jem ZR33 Hi-Mass

Martin Maszyna efektów Jem ZR33 Hi-Mass

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Martin Jem ZR33 Hi-Mass (8 stron) w kategorii Maszyna efektów. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
Martin Professional A/S, Olof Palmes Allé,DK-82000 Aarhus N
Phone: +45 87 40 00 00, Internet: www.martin.dk
ZR33
USER GUIDE
VERSION 1.5
MARTIN MANUFACTURING (UK) PLC
ZR33 HI-MASS
ZR33
ZR33
ZR33
ZR33 HI-MASS
HI-MASS
HI-MASS
HI-MASS
HI-MASS
Note:
The JEM warranty will be void if any fluid other then JEM approved fluid is used. If
other fluids are used there could be serious damage to the machine and the fluid
may not of been tested for use in public areas.
MARTIN MANUFACTURING (UK) PLC
ZR33-DMX USER GUIDE
Fluids suitable for this machine:
Pro-Smoke
Super
Regular
DJ
Pro-Smoke
High Density
Pro-Smoke
Studio
ZR33-DMX USER GUIDE
MARTIN MANUFACTURING (UK) PLC
Notes:
ZR33-DMX USER GUIDE
Trouble Shooting
CAUSE CURE
SYMPTOM
The mains switch does not light
when I switch on.
Main fuse blown.
No power connected.
Check main fuse.
Check power is connected.
The power LED does not light on
the remote control.
Fuse on main PCB blown.
Remote control not connected.
Check fuse on Main PCB.
Check connection of remote control.
The ready LED does not light.
even after 15 minutes.
Stand-by button is not on.
Sensor fault
Check stand-by button
Contact JEM or your Distributor.
No smoke output when fog button
is pressed (ready LED is lit).
The output knob is not set correctly
No fluid in fluid container.
Turn output knob fully clockwise.
Replace fluid container.
The effect is not lasting long enough. Fluid is the wrong grade. Choose a longer lasting fluid (SP)
PAGE 12 MARTIN MANUFACTURING (UK) PLC
ZR33-DMX USER GUIDE
User Guide Index
Introduction
Safety
Machine Layout
Getting Started
Using The Remote Control
Using DMX 512
Using The Slave Socket
The ZR33 Flying Kit
The ZR33 Ducting Kit
Trouble Shooting
How To Contact Us
PAGE 1
MARTIN MANUFACTURING (UK) PLC
Note:
Martin Manufacturing (UK) reserves the right to modify or change the
specification of this product without prior notice.
No part of this publication shall be copied without permission
© Martin Manufacturing (UK). 2000


Specyfikacje produktu

Marka: Martin
Kategoria: Maszyna efektów
Model: Jem ZR33 Hi-Mass

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Martin Jem ZR33 Hi-Mass, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Maszyna efektów Martin

Instrukcje Maszyna efektów

Najnowsze instrukcje dla Maszyna efektów