Instrukcja obsługi Martin Exterior 400

Martin Ulga Exterior 400

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Martin Exterior 400 (40 stron) w kategorii Ulga. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/40
Exterior 400 Exterior 410
Exterior 420 Exterior 430
user manual
Exterior 400™ Range
Dimensions
All dimensions are in millimeters
©2010-2015 Martin Professional ApS. Information subject to change without notice. Martin Professional ApS and all affiliated
companies disclaim liability for any injury, damage, direct or indirect loss, consequential or economic loss or any other loss
occasioned by the use of, inability to use or reliance on the information contained in this manual. The Martin logo, the Martin name
and all other trademarks in this document pertaining to services or products by Martin Professional ApS or its affiliates and
subsidiaries are trademarks owned or licensed by Martin Professional ApS or its affiliates or subsidiaries. The use of certain patents
in Martin Exterior 400 Range products is licensed by Color Kinetics, Inc. (see details printed on product).
P/N 35000237, Rev. F
Safety Information
The following symbols are used to identify important safety information on the product and in this manual:
This product is for professional use only. It is not for household use.
This product presents risks of severe injury or death due to fire hazards, electric shock and falls.
Read this manual before installing, powering or servicing the fixture, follow the safety precautions listed
below and observe all warnings in this manual and printed on the fixture. Install and operate the fixture only
as described in this manual and in accordance with local laws and regulations. Refer any operation not
described in this manual to a qualified technician.
If you have questions about how to operate the fixture safely, please contact your Martin supplier or call the
Martin 24-hour service hotline on +45 8740 0000, or in the USA on 1-888-tech-180.
P R O T E C T I O N F R O M E L E C T R I C S H O C K
• Shut down power to the entire installation at the main power distribution board and lock out power (by
removing the fuse for example) before carrying out any installation or maintenance work.
• Disconnect the fixture from AC power before removing or installing any cover or part and when not in use.
• Connect the fixture electrically to ground (earth).
• Use only a source of AC power that complies with local building and electrical codes and has both
overload and ground-fault (earth-fault) protection.
• Connect the fixture to AC power either using either the supplied power cable or a listed 3-conductor
Hypalon or neoprene rubber-jacket cable rated to 90° C (194° F) minimum and with conductor size 1.5
mm2 or 16 AWG minimum.
• Before using the fixture, check that all power distribution equipment and cables are in perfect condition,
are rated for the current requirements of all connected devices, are protected to IP67 or higher and are of
suitable type for the location (including water, pollution, temperature and UV resistance).
• Isolate the fixture from power immediately if any cable, seal, cover or other component is damaged,
cracked or deformed. Do not reapply power until repairs have been completed.
• Do not expose any part of the fixture to a high-pressure water jet.
• Do not immerse the fixture in water or any other fluid, or install it in a location where flooding may occur.
• Refer any service operation not described in this manual to an authorized Martin Service partner.
WARNING!
Read the safety precautions in this section before
installing, powering, operating or servicing this
product.
WARNING!
Safety hazard.
Risk of severe
injury or death.
WARNING!
Hazardous
voltage. Risk of
lethal or severe
electric shock.
WARNING!
LED light
emission. Risk
Group 3
according to IEC
62471.
WARNING!
Fire hazard.
WARNING!
Refer to user
manual.

Specyfikacje produktu

Marka: Martin
Kategoria: Ulga
Model: Exterior 400

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Martin Exterior 400, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Ulga Martin

Martin

Martin ERA 700 Performance IP Instrukcja

30 Września 2024
Martin

Martin Thrill Vertical Fogger Instrukcja

24 Września 2024
Martin

Martin Extube Instrukcja

24 Września 2024
Martin

Martin MUM Instrukcja

24 Września 2024
Martin

Martin Freekie Instrukcja

24 Września 2024
Martin

Martin P3-100 Instrukcja

23 Września 2024
Martin

Martin THRILL Multi-FX LED Instrukcja

23 Września 2024
Martin

Martin Fixture Beam Analyzer Instrukcja

22 Września 2024
Martin

Martin MAC Ultra Wash Instrukcja

22 Września 2024
Martin

Martin RUSH MH 4 Beam Instrukcja

22 Września 2024

Instrukcje Ulga

Najnowsze instrukcje dla Ulga

Goobay

Goobay 30780 Instrukcja

15 Października 2024
QTX

QTX DM-X12 Instrukcja

15 Października 2024
Livarno

Livarno IAN 94799 Instrukcja

15 Października 2024
Astro

Astro Denia Instrukcja

13 Października 2024
AFX

AFX Grace GRCP07CBBK Instrukcja

12 Października 2024
AFX

AFX Point PNTP0107L30D1BK Instrukcja

12 Października 2024
Neewer

Neewer TL97C Instrukcja

9 Października 2024
Neewer

Neewer SRP18C Instrukcja

9 Października 2024
Ikea

Ikea STRÅLA 005.824.56 Instrukcja

9 Października 2024
Ikea

Ikea STRÅLA 705.829.38 Instrukcja

9 Października 2024