Instrukcja obsługi Marshall MG10CD


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Marshall MG10CD (6 stron) w kategorii wzmacniacz gitarowy. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/6
MG
S E R I E S10CD
Owners Manual
2 CHANNELS
CLEAN
OVERDRIVE
EQ
CONTOUR
CD INPUT
EMULATED
LINE OUT
EMULATED
1
From Jim Marshall
I would like to thank you personally for selecting our new MG10CD Combo.
As a musician myself, I fully understand the necessity of achieving the right tone and feel to
help you realise your potential – whether an aspiring beginner or more experienced player. With
this in mind, I set my experienced R&D team the task of designing a new range of affordable MG
amplifiers that truly captured the essence of the Marshall sound.
Utilising new technologies, some of which were developed for the critically acclaimed AVT
range, the new MG Series raises the standard for what can be expected from a value-for-money
range of guitar amplifiers and defines a new benchmark. For example, the power amp section of
your MG10CD boasts FDD (Frequency Dependant Damping) – a radical new feature, exclusive
to Marshall Amplification, that accurately mimics the way an all-valve amp interacts with a
loudspeaker. As a result of FDD, your new MG10CD will give you a width of sound never before
thought possible in such an affordable, non-valve amp.
Whether the MG10CD is your first ever Marshall or is the latest addition to your arsenal of
amps, the tone and feel of this compact, rugged combo will deliver the goods – from bedroom to
backstage!
Like all the amplifiers in my new MG range, the MG10CD was completely designed and
engineered in the UK. The most rigorous quality control procedures ensure that it meets the
standard of build you have come to expect from all Marshall products.
I wish you every success with your new Marshall. Welcome to the family.
Yours Sincerely,
ENGLISH
WARNING! - Important safety instructions
WARNING: This apparatus must be earthed!
A PLEASE read this instruction manual carefully before switching on.
B ALWAYS use the supplied mains lead, if a replacement is required please contact your
authorised Marshall Dealer.
Note: Closed back equipment with non-detachable mains cord.
When the equipment is not in use or is being transported, the mains
cord should be gathered and retained under the top strap handle to
prevent damage. See diagram.
C NEVER attempt to by-pass the fuses or fit ones of the incorrect value.
D DO NOT attempt to remove the amplifier chassis, there are no user serviceable parts.
E Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way, such as when the
power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally
or has been dropped.
F NEVER use an amplifier in damp or wet conditions.
G ALWAYS unplug this apparatus during lightning storms or when unused for long periods of
time.
H PROTECT the power cord from being walked on or pinched particularly at plugs,
convenience receptacles and at the point where they exit from the apparatus.
I DO NOT switch the amplifier on without the loudspeaker connected.
Note: This equipment has been tested and found to comply with the requirements of the EMC
directive (Environments E1, E2 and E3 EN 55103-1/2) and the Low Voltage directive in the E.U.
EUROPE ONLY - Note: The Peak Inrush current for the MG10CD is 2 amps.
CAUTION: Any changes or modifications not expressly approved by the party responsible for
compliance may void the users authority to operate the equipment.
Note: It is recommended that all audio cables used to connect to the MG10CD are of a high
quality screened type. These should not exceed 10 metres in length.
WARNING:
Always ensure free movement of air around the amplifier!
USA ONLY - DO NOT defeat the purpose of the polarised or grounding type plug. A
polarised plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided for your safety.
When the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
Follow all instructions and heed all warnings
KEEP THESE INSTRUCTIONS !
2
!
!
!
!!
ENGLISH


Specyfikacje produktu

Marka: Marshall
Kategoria: wzmacniacz gitarowy
Model: MG10CD

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Marshall MG10CD, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje wzmacniacz gitarowy Marshall

Marshall

Marshall JVM410H Instrukcja

11 Stycznia 2025
Marshall

Marshall MG100DFX Instrukcja

22 Września 2024
Marshall

Marshall Supervibe Instrukcja

21 Września 2024
Marshall

Marshall MF280 Instrukcja

16 Września 2024
Marshall

Marshall TSL60 Instrukcja

15 Września 2024
Marshall

Marshall JMP-1 Instrukcja

12 Września 2024
Marshall

Marshall 1959SLP Instrukcja

8 Września 2024
Marshall

Marshall MG50 Instrukcja

5 Września 2024
Marshall

Marshall MG250DFX Instrukcja

5 Września 2024
Marshall

Marshall JVM210C Instrukcja

5 Września 2024

Instrukcje wzmacniacz gitarowy

Najnowsze instrukcje dla wzmacniacz gitarowy