Instrukcja obsługi Marshall DSL40CR
Marshall
Wzmacniacze gitarowe
DSL40CR
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Marshall DSL40CR (38 stron) w kategorii Wzmacniacze gitarowe. Ta instrukcja była pomocna dla 24 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/38
DSL100HR &
DSL40CR
OWNER’S MANUAL
INTRODUCTION
DSL 100/40 OVERVIEW
Congratulaons on your purchase of this Dual Super Lead (DSL) amplier from
Marshall Amplicaon.
The DSL provides the legendary Marshall tone, allowing you to express your disnct
playing style and atude. From clean to distorted overdrives, the DSL is a versale
all valve amp that allows you to easily dial in the sound you desire.
This DSL amplier not only delivers the tone you expect from a Super Lead amplier
it is also packed with an array of features such as an eects loop, power reducon
and studio quality digital reverb. Right out of the box your DSL provides you with
the funconality you need to take your sound from rehearsal to the stage with
condence.
Your DSL amplier has been designed specically for those who need the full rich
tone of a valve amp. This makes the amp ideal for a live environment, studio or at
home thanks to the power reducon system.
We hope you enjoy performing, praccing and recording with your DSL amplier.
- The Marshall Team.
The DSL 100 Head and 40 Combo feature the same funcons. The combo is loaded
with a 12” G12 V-type speaker chosen for its ability to deliver exceponal tone and
exibility.
The DSL features two foot switchable channels: CLASSIC GAIN and ULTRA GAIN.
The CLASSIC GAIN channel delivers sparkling clean sounds through to the more
aggressive break-up of a Marshall JCM800 amplier. The ULTRA GAIN channel
provides even more distoron and break-up for players looking for higher gain tones
from their amplier.
Both channels share a passive three-band EQ, with BASS, MIDDLE and TREBLE
controls. The EQ secon also features Tone Shi, which when acvated recongures
the pre-amp mid frequencies making DSL ideal for contemporary metal tones,
especially when combined with higher gain sengs.
The DSL features professional quality digital REVERB and a series FX LOOP. The LOW
POWER funcon adds a further dimension to the DSL sound, giving you rich valve
tone at an ear-friendly volume.
For the most demanding players, the DSL 40 Combo and DSL 100 Head feature MIDI
compability meaning outboard MIDI equipment can access all the features needed
to perform.
ENGLISH
ENGLISH
PLEASE READ THIS MANUAL CAREFULLY
BEFORE PLUGGING IN.
FOLLOW ALL INSTRUCTIONS AND HEED ALL WARNINGS.
KEEP THESE INSTRUCTIONS.
This device complies with part 15 of the FCC Rules. Operaon is subject to the
following two condions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operaon.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are designed
to provide reasonable protecon against harmful interference in a residenal
installaon.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instrucons, may cause harmful
interference to radio communicaons.
However, there is no guarantee that interference will not occur in a parcular
installaon. If this equipment does cause harmful interference to radio or television
recepon, which can be determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separaon between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modicaons not expressly approved by the party
responsible for compliance could void the users authority to operate the equipment.
This device complies with CAN ICES-3(B)/NMB-3(B)
COMPLIANCE STATEMENT
WARNING! IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
WARNING:
Before going any further, make sure that
your amplier is compable with your
mains electricity supply. If you have any
doubt, please seek help from a qualied
technician – your Marshall dealer can
help you in this respect.
MAINS INPUT & FUSE:
The specic mains input voltage
rang that your amplier has been
manufactured for is indicated on the
rear panel of the amplier. Your amplier
is provided with a detachable mains
(power) lead, which should be connected
to the MAINS INPUT socket on the rear
panel of the amplier (Rear Panel Funcon
#26). The correct value and type of
mains fuse is specied on the rear panel
of the amplier.
NEVER aempt to bypass the fuse or t
one of the incorrect value or type.
TRANSPORTING YOUR EQUIPMENT:
Please ensure that your amplier is
switched o, unplugged from the mains
electricity supply and all removable
cables have been disconnected from
your equipment before aempng to
move it.
IMPORTANT SET UP INFORMATION:
1. When using the DSL40CR, or the
DSL100HR with an extension
speaker cabinet(s), make sure
that the speaker cabinet(s) is
connected to the correct impedance
loudspeaker jack socket(s) on the
rear panel of the amplier. See
the LOUDSPEAKERS guide in this
manual for specic informaon
regarding impedance matching (Rear
Panel Funcon #33).
WARNING:
Failure to do the above may damage
your amplier. When connecng a
speaker cabinet make sure that you use
a proper speaker cable. Never use a
screened (shielded) guitar cable for this
purpose.
2. Ensure that the POWER switch is
set to the OFF posion (Front Panel
Funcon #25).
3. Ensure the OUTPUT switch is in
the STANDBY posion (Front Panel
Funcon #24).
4. Connect the supplied mains (power)
lead into the MAINS INPUT (Rear
Panel Funcon #26) rst and then into
an electricity outlet.
5. Ensure that the volume controls on
the front panel are set to zero (Front
Panel Funcons #19 & #21).
6. Plug your guitar into the INPUT jack
socket (Front Panel Funcon #1).
7. Switch the amplier ON using
the POWER switch, wait for a
few minutes and then switch the
OUTPUT switch to either the LOW
or HIGH posion.
8. Turn the selected channel volume
up to your preferred level and your
amplier is ready to play.
Specyfikacje produktu
| Marka: | Marshall |
| Kategoria: | Wzmacniacze gitarowe |
| Model: | DSL40CR |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Marshall DSL40CR, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Wzmacniacze gitarowe Marshall
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
Inne instrukcje Marshall
14 Października 2024
9 Października 2024
1 Października 2024
30 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024