Instrukcja obsługi Marshall DSL1CR
Marshall
Wzmacniacze gitarowe
DSL1CR
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Marshall DSL1CR (6 stron) w kategorii Wzmacniacze gitarowe. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/6
OWNER’S MANUAL
DSL1CR &
DSL1HR
Congratulations on your purchase of this Dual Super Lead (DSL) amplier from
Marshall Amplication.
The DSL provides the legendary Marshall tone, allowing you to express your distinct
playing style and attitude.
From clean to distorted overdrives, the DSL 1 is a versatile all valve amp that allows
you to easily dial in the sound you desire.
This DSL amplier not only delivers the tone you expect from a Super Lead amplier
it is also packed with an array of features such as an effects loop, power reduction
and studio quality digital reverb.
Your DSL has been specically engineered to sound great at much lower volumes
than its larger counterparts. This makes the amp ideal for use at home or other quiet
environments.
We hope you enjoy your DSL amplier.
- The Marshall Team
INTRODUCTION
The DSL 1 Head and DSL 1 Combo feature the same functions. The combo is
equipped with an 8” Celestion Eight-15 speaker chosen for its ability to deliver
exceptional tone at lower volumes.
The DSL features two foot switchable channels: CLASSIC GAIN and ULTRA GAIN.
The CLASSIC GAIN channel delivers sparkling clean sounds through to the more
aggressive break-up of a Marshall JCM800 amplier. The ULTRA GAIN channel
provides even more distortion and break-up for players looking for higher gain tone
from their amplier.
Both channels share a passive three-band EQ, with BASS, MIDDLE and TREBLE
controls. The EQ section also features Tone Shift, which when activated recongures
the pre-amp mid frequencies making DSL ideal for contemporary metal tones,
especially when combined with higher gain settings.
The DSL 1 features professional quality digital REVERB and a series FX LOOP, giving
you rich valve tone at an ear-friendly volume.
OVERVIEW
ENGLISH
ENGLISH
PLEASE READ THIS MANUAL CAREFULLY
BEFORE PLUGGING IN.
FOLLOW ALL INSTRUCTIONS AND HEED ALL WARNINGS.
KEEP THESE INSTRUCTIONS.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modications not expressly approved by the party
responsible for compliance could void the users authority to operate the equipment.
This device complies with CAN ICES-3(B)/NMB-3(B)
COMPLIANCE STATEMENT
WARNING:
Before going any further, make sure that
your amplier is compatible with your
mains electricity supply. If you have any
doubt, please seek help from a qualied
technician – your Marshall dealer can
help you with this.
MAINS INPUT & FUSE:
The specic mains input voltage
rating that your amplier has been
manufactured for is indicated on the
rear panel of the amplier. Your amplier
is provided with a detachable mains
(power) lead, which should be connected
to the MAINS INPUT socket on the rear
panel of the amplier (Rear Panel Function
#12). The correct value and type of
mains fuse is specied on the rear panel
of the amplier.
NEVER attempt to bypass the fuse or t
one of the incorrect value or type.
TRANSPORTING YOUR EQUIPMENT:
Please ensure that your amplier is
switched off, unplugged from the mains
electricity supply and all removable
cables have been disconnected from
your equipment before attempting to
move it.
WARNING! IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SET UP INFORMATION:
1. When using the DSL1HR, or
the DSL1CR with an extension
speaker cabinet, you must ensure
that the speaker cabinet is of the
correct impedance rating. See
the LOUDSPEAKER guide in this
manual for specic information
regarding impedance matching (Rear
Panel Function #19).
WARNING Failure to do the above may
damage your amplier. When connecting
a speaker cabinet make sure that you
use a proper speaker cable. Never use a
screened (shielded) guitar cable for this
purpose.
2. Ensure that the POWER switch is
set to the OFF position. (Front Panel
Function #11)
3. Connect the supplied mains (power)
lead into the MAINS INPUT on the
rear panel rst and then into the
mains electricity supply. (Rear Panel
Functions #12)
4. Ensure that the volume controls on
the front panel are set to zero. (Front
panel Functions #2 & #5)
5. Plug your guitar into the INPUT jack
socket. (Front Panel Function #1)
6. Switch the amplier ON using the
POWER switch (Front Panel Function
#11).
7. Turn the selected channel volume
up to your preferred level and your
amplier is ready to play.
ENGLISH
Specyfikacje produktu
| Marka: | Marshall |
| Kategoria: | Wzmacniacze gitarowe |
| Model: | DSL1CR |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Marshall DSL1CR, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Wzmacniacze gitarowe Marshall
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
Inne instrukcje Marshall
14 Października 2024
9 Października 2024
1 Października 2024
30 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024