Instrukcja obsługi Marshall 2203
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Marshall 2203 (4 stron) w kategorii Wzmacniacze gitarowe. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/4
Marshall Amplification plc
Denbigh Road, Bletchley, Milton Keynes, MK1 1DQ, England
Tel : [01908] 375411 Fax : [01908] 376118
www.marshallamps.com
Whilst the information contained herein is correct at the time of publication, due to our policy of constant improvement
and development, Marshall Amplification plc reserve the right to alter specifications without prior notice.
BOOK-00067-00 / 2 / 02
Owners Manual
JCM800 2203
2
WARNING! - Important safety instructions
WARNING: THIS APPARATUS MUST BE EARTHED!
APLEASE read this instruction manual carefully before switching on.
BALWAYS use the supplied mains lead, if a replacement is required please contact your authorised
Marshall Dealer.
CNEVER attempt to bypass the fuses or fit ones of the incorrect value.
DDO NOT attempt to remove the amplifier chassis, there are no user serviceable parts.
ERefer all servicing to qualified service personnel including replacement of fuses and valves.
Servicing is required when the apparatus has been damaged in any way, such as when the power supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally or has been dropped.
FNEVER use an amplifier in damp or wet conditions. No objects filled with liquids should be placed on the
apparatus.
GALWAYS unplug this apparatus during lightning storms or if unused for long periods of time.
HPROTECT the power cord from being walked on or pinched particularly at plugs, convenience receptacles and
at the point where they exit from the apparatus.
IDO NOT switch the amplifier on without a loudspeaker connected.
J ENSURE that any extension cabinets used are of the correct impedance.
➲
Note: This equipment has been tested and found to comply with the requirements of the EMC directive
(Environments E1, E2 and E3 EN 55103-1/2) and the Low Voltage directive in the E.U.
➲
EUROPE ONLY - Note: The Peak Inrush current for the 2203 is 38 amps.
➲
CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance may
void the users authority to operate the equipment.
➲
Note: It is recommended that all audio cables, with the exception of the speaker lead, used to connect to the
2203 are of a high quality screened type. These should not exceed 10 metres in length.
Always use a non-screened Marshall approved speaker lead with the 2203 Head and extension cabinets.
➲
WARNING: Do not obstruct ventilation grilles and always ensure free movement of air around the amplifier!
USA ONLY - DO NOT defeat the purpose of the polarised or grounding type plug. A polarised plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
FOLLOW ALL INSTRUCTIONS AND HEED ALL WARNINGS
KEEP THESE INSTRUCTIONS !
!
ENGLISH
ENGLISH
From the Chairman
I would like to personally thank you for selecting this
re-issue of my all-valve, JCM800 2203, 100 Watt, Master
Volume head. My company’s reputation and longevity
have been built on a great many things – groundbreaking
designs, skilled workmanship, reliability, flexibility, stylish
looks and, above all else, great tone and feel. The
continual fascination and love that many current guitarists
show for our vintage amplification products is a testament
to just how relevant and important such models are to this
very day.
The amplifier you have just acquired is a re-issue of the
JCM800 2203, 100 Watt head that was originally
launched in March of 1981 and proved incredibly popular
with rock guitarists throughout the ‘80s. Although my
JCM900 Series replaced the entire JCM800 range in
1991, the 2203 has remained a firm favourite with
countless players – hence my decision to start making it
again.
Our re-issue of the JCM800 2203 is totally faithful to
the original in terms of looks, tone and feel. At the request
of many 2203 fanatics it also boasts the addition of a
Series Effects Loop – a feature which makes it totally at
home in the modern performance arena.
I would like to wish you every success with your new
amplifier and welcome you to the large and ever
increasing family of players who plug into Marshall
products.
1
Introduction
The all-valve 2203 is one of the most highly respected and revered 100 Watt Marshall heads in the company’s
long and illustrious history. Evolving from the legendary 100 Watt ‘Plexi’ head, it was also our first amplifier to
house a Master Volume (MV) control. This simple but groundbreaking feature allowed the user to overdrive the
preamp valves into desirable distortion without having to turn the amp full up. This proved to be incredibly popular
and practical because, as you probably know, a 100 Watt Marshall is extremely loud when on full volume!
Furthermore, thanks to its cascaded preamp design, the 2203 was capable of producing a level of distortion never
heard from a guitar amp before.
The very first 2203 was actually introduced to the world in 1975. The JCM800 version that surfaced some six
years later, in 1981, was merely a cosmetic redesign of the original. The circuitry remained exactly the same (as
the saying goes, "if it isn’t broken, don’t fix it!"), but the amp’s appearance got much bolder with a full-width
control panel (the 2203 of 1975-1981 had a shorter front panel like a 1959SLP), grille cloth over the front baffle
(the original 2203’s baffle was covered with vinyl), white piping, and ‘JCM800’ written in bold letters on the front
panel, together with Jim’s signature. If you’re wondering about the origin of the JCM800 name, it’s an interesting
tale – it came from the registration/license plate of Mr. Marshall’s car which was, wait for it, JCM800! The ‘JCM’
part of it referred to Jim’s initials (James Charles Marshall), the ‘800’ was merely the number on the plate – no
more, no less!
As guitar amplifiers go, the 2203 is the very essence of simplicity – it’s a one channel amp with no reverb or
built-in effects and its all-valve design produces a sound that, as Mike Doyle so aptly describes in his excellent ‘The
History of Marshall’ book, is "crunchier than a lorry running over a hedgehog!" As a result of its idiot-proof
interface, distinctive roar and larger-than-life ‘edge’, the 2203 immediately set the standard by which all other rock
amps were judged and it remained the ‘industry benchmark’ throughout the entire 16 years of its production life.
ENGLISH
The unparalleled new tones the 2203 generated immediately became the sonic impetus that helped drive forward
the veritable explosion of hard rock acts in the late seventies and early eighties. The JCM 800 incarnation of the amp
(along with the other models in the JCM800 range, most of which were derivatives of the 2203) quickly became the
mainstay of the burgeoning heavy metal scene that dominated the ‘80s and was the amp responsible for many of the
seminal thrash metal recordings of this period. In fact, Kerry King and Jeff Hanneman of Slayer, a hugely influential
band that helped pioneer the thrash genre, still use their Marshall 2203s to this very day.
The late eighties and early nineties saw a shift towards the ‘alternative/Brit pop’ movement in the UK, while the US
was dominated by the ‘grunge’ scene. The wide-ranging use of 2203s in these extremely varied musical genres is a
true reflection of this amplifier’s extremely versatile tonal range.
With the launch of Marshall’s hugely popular JCM 900 Series in 1991, the JCM800 2203 was deservedly, but
somewhat reluctantly, put out to pasture after 16 years of sonic supremacy. Despite its retirement though, the 2203
continued to be a much sought after amp and scores of players, including that brilliant fretburner Zakk Wylde (of
Ozzy Osbourne and Black Label Society fame), would relentlessly hunt down old 2203s for use in the studio and on
stage.
Owing to the seemingly never-ending barrage of requests we receive on a daily basis for the 2203, we’ve decided
that it is time for us to relaunch this great amp in its most popular guise – the JCM800. Furthermore, by popular
demand, we’ve also given it a Series Effects Loop that features a true Bypass switch that takes the loop completely
out of the circuit, thus ensuring the original tone isn’t compromised in any shape or form.
ENGLISH
3 4
Specyfikacje produktu
| Marka: | Marshall |
| Kategoria: | Wzmacniacze gitarowe |
| Model: | 2203 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Marshall 2203, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Wzmacniacze gitarowe Marshall
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
Inne instrukcje Marshall
14 Października 2024
9 Października 2024
1 Października 2024
30 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024