Instrukcja obsługi Markbass MB Mini Boost

Markbass Niesklasyfikowane MB Mini Boost

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Markbass MB Mini Boost (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

LIMITED WARRANTY

Markbass oers an international limited warranty on Markbass products purchased from any

authorized Markbass dealer, eective from the day of purchase. The terms of this warranty

vary from country to country; please contact the Markbass distributor in your country for

details.

Please register this product online at www.markbass.it to establish the date of purchase.

However, please note that you are required to retain a copy of your receipt as proof of

purchase in order to receive warranty service.

This warranty does not apply to any damage to the product caused by misuse, mishandling,

accident, abuse, alteration, modication or unauthorized repairs. Product appearance and

normal wear and tear (worn paint, scratches, etc.) are not covered by this warranty. Markbass

reserves the right to be the sole arbiter regarding the misuse or abuse of this product.

Markbass assumes no liability for any incidental or consequential damages, which may result

from the failure of this product. Any warranties implied in fact or by law are limited to the

duration of this express limited warranty. Your legal rights related to the warranty will vary

depending on the country of purchase.

WARRANTY CARD

This product is guaranteed by the warranty provided in the country of purchase, under the

following conditions:

A - The Markbass warranty is only applicable if this document been properly completed (here

or online) and if the original invoice/bill of sale, mentioning model, serial number and

purchase date, is presented together with this document.

B - The obligations of Markbass are limited to the repair of defects. Warranty repair eligibility

will be decided at the sole discretion of Markbass or its representatives. Freight, freight

insurance costs, and any other costs related to the repair of this product are not covered by

this warranty.

C - All warranty repairs must be made by Markbass or an authorized Markbass (PARSEK)

service center.

D - This warranty does not apply in the following instances:

• if the damage was caused by accident, negligence or modications; use of non Markbass

spare parts; or improper use, installation or packing;

• if the serial number on the equipment is illegible;

• if the damage was caused by lightning, water, re, incorrect main voltage, insuﬃcient

ventilation or any other cause beyond the control of Markbass.

E - Markbass reserves the right to redesign or improve/modify its product at any time without

any obligation to modify previously manufactured products.

Parsek srl. - Italy - 66020 San Giovanni Teatino (Ch) - Via Po, 52/A Tel. +39 085 446 37 55 - Fax

+39 085 440 77 64 - www.markbass.it - info@markbass.it

GETTING STARTED

BOOST - To set up the Level Boost, plug your instrument into the Input Jack (5), and

connect the Output Jack (6) to your amplier, after connecting a +9/+12VDC power

supply to the DC IN to the DC IN (7). Turn the boost on using the footswitch (3), making

sure the LED (4) is ON (this indicates that the eect is active). Next, adjust the Boost

Level slider while toggling the footswitch (3) on and o, comparing the volume of the

direct signal with the boosted signal. Match the gain level as closely as you can to the

direct signal, then adjust the Level Boost slider to the desired amount of added boost

or cut. A suggested use of the boost is to leave it turned o until it’s time to solo, then

switch it on (3) for a quick level boost when you begin your solo. You can easily apply

this to ANY situation where you need two dierent, quickly accessible playing volumes.

VPF (Variable Pre-shape Filter) - This lter boosts lows and highs, and cuts mids.

Some call this kind of eect a scoop, a smiley-shape EQ, or an enhance knob. It’s very

eective for slap bass, pick playing, and driving eighth-note rock. It’s o when it is all

the way counterclockwise—we suggest you start in that position and turn the lter up

gradually, to hear and understand what it does.

TECHNICAL SPECS

INPUT IMPEDANCE: 1 Mohm / 6 Vpp

OUTPUT IMPEDANCE: 470 ohm / 6 Vpp

BOOST: 0 to +20dB (maximum gain)

POWER REQUIREMENTS- DC INPUT: +9/+12VDC

DIMENSIONS: 48.4 x 38.2 x 104.2 mm

1.91” x 1.5” x 4.1”

WEIGHT: 174 g

0.38 lbs

BLOCK DIAGRAM

booster

Level VPF

Out

OWNER’S MANUAL

WARRANTY CARD

We’d like to thank you for choosing a Markbass product.

If any problem occurs, please don’t hesitate to contact our support team at

service@markbass.it.

You can ll out this form and send a copy to Markbass (Parsek srl, Via Po 52, 66020 San Giovanni

Teatino, CHIETI ITALY) or, even better, you can now register your warranty online in a matter of

minutes, using our online registration form at www.markbass.it. Simply point, click and type in

your information...and you’re done!

Registering your warranty identies you and your product, in case you are ever in need of

warranty service. Please note that in order to qualify for warranty service, you must retain a

copy of the sales receipt or bill of delivery as proof of purchase.

The information that you provide here will not be shared with any third parties and will be used

for Markbass internal business purposes only.

PRODUCT INFORMATION

Model _________________________________ Serial Number _________________________

Date of Purchase_________________________(mm/dd/yyyy)

DEALER INFORMATION

Dealer _________________________________ Dealer City ____________________________

Dealer Country__________________________

PERSONAL INFORMATION

Purchased by:

First Name _____________________________ Last Name ____________________________

Your Email Address ______________________ Address ______________________________

City ___________________________________ State/Prov ____________________________

Zip ___________________________________ Country______________________________

Do you want to join our mailing list? YES NO □ □

MORE INFO (* not mandatory)

*Age __________________________________ *Sex_________________________________

*Occupation____________________________

WHERE DO YOU PLAY YOUR INSTRUMENT?

□ □ Stage / Performing Musician School / Student

□ □ □ Classroom / Educator Home Studio Recording

WHAT LEVEL OF PLAYER ARE YOU?

□ □ □ Beginner Amateur Semi-Professional

□ Professional

PRODUCT PURCHASED VIA:

□ □ Internet Retail Store

WHAT MOST INFLUENCED YOUR BUYING DECISION?

______________________________________________________________________________

1. IMPORTANT SAFETY INSTRUCTIONS

1) Read these instructions;

2) Keep these instructions;

3) Heed all warnings;

4) Follow all instructions;

5) Do not use this apparatus near water;

6) Clean only with dry cloth;

7) Install in accordance with the manufacturer’s instructions;

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatuses (including ampliers) that

produce heat;

9) Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where

they exit from the apparatus;

10) Only use attachments/accessories specied by the manufacturer;

11) Unplug this apparatus during lightning storms or when unused for long periods of time;

12) Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way,

such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen

into the apparatus, or when the apparatus has been exposed to rain or moisture, does not operate normally, or has been

dropped;

13) “Warning: to reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture; and objects lled with

liquids, such as vases, should not be placed on this apparatus”;

14) The socket outlet shall be installed near the equipment and shall be easily accessible;

15) The power cord must be unplugged prior to servicing.

1. PRÉCAUTIONS D’EMPLOI

1) Lire ces instructions;

2) Conserver ces instructions;

3) Suivre tous les conseils d’utilisations;

4) Suivre toutes les instructions;

5) Ne pas utiliser cet appareil au bord de l’eau;

6) Nettoyer uniquement avec un chion humide;

7) Ne pas bloquer le système de ventilation. Installer conformément aux instructions du fabricant;

8) Ne pas installer l’appareil près d’une source de chaleur tel qu’un radiateur, un fourneau, ou bien un autre appareil qui produit

de la chaleur;

9) Protéger le cordon d’alimentation an qu’il ne soit pas piétiné ou écrasé tout particulièrement au niveau des ches, des prises

de courant femelles, et des parties qui sortent de l’appareil;

10) Utiliser uniquement les accessoires recommendés par le fabricant;

11) Ne pas branché l’appareil en cas d’orage accompagné d’éclairs. Le débrancher en cas de non utilisation prolongée;

12) S’adresser à un service assistance agréé si l’appareil a subi des dommages, si le cordon d’alimentation ou la che a été

endommagé, si un liquide a été renversé sur l’appareil ou bien si un object est tombé dans l’appareil,

si ce dernier a été exposé à la pluie ou à l’humidité, s’il ne fonctionne pas correctement ou s’il est tombé;

13) “Avertissant: pour réduire le risque du feu ou de décharge électrique, n’exposez pas cet appareil à la pluie ou l’humidité et les

objets remplis de liquides; tels que des vases, ne devraient pas être placés sur cet appareil”;

14) La prise de courant doit être installée près de l’appareil et doit être facilement accessible;

15) La che principale doit être débranchée avant toute opération d’entretien.

MORE INFORMATION

For warranty and service information, please contact your local Markbass distributor (contact information available at

www.markbass.it). For more technical information, please visit us at www.markbass.it and ll out the form on the

“The Lightning Flash with arrowhead symbol

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product

enclosure that may be of suﬃcient magnitude

to constitute a risk of shock to persons.”

“The exclamation point within an equilateral

triangle is intended to alert the user

to the presence of important operating and

maintenance (servicing) instructions

in the literature accompanying the product.”

FUNCTIONS OVERVIEW

LEVEL BOOST (1) - This control increases your instrument’s

volume without changing its sound (from 0dB to 20dB ),

which is very useful for solos and any time you need to boost

your signal without distortion.

VPF FILTER CONTROL (2) - The VPF (Variable Pre-shape

Filter) boosts lows (around 35 Hz) and highs (around 10 kHz),

and cuts mids at 380 Hz. This lter is especially great for rock

music, slap bass and playing with a pick.

BOOST SWITCH* (3) - The LED (4) indicates that the eect

pedal is engaged.

*TRUE BYPASS

TRUE BYPASS - When the pedal’s controls are ‘o’, your signal

goes directly from the input jack to the output jack without

any degradation of audio quality.

5. CONNECTIONS

1/4” INPUT JACK (connects to your instrument) (5) - Make

sure that your amp is o and the volume is turned down

before making connections. Connect your instrument to the

input of the MB Mini Boost and the output of the MB Mini

Boost to your amplier.

1/4” OUTPUT JACK (connects to your amplier) (6)

DC IN (7) - External power supply connection: +9/+12VDC

Specyfikacje produktu

Marka:	Markbass
Kategoria:	Niesklasyfikowane
Model:	MB Mini Boost

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Markbass MB Mini Boost, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane Markbass

Markbass Little Mark IV Instrukcja

22 Września 2024

Markbass Little Mark IV Ninja Instrukcja

22 Września 2024

Markbass Little Mark IV 300 Instrukcja

20 Września 2024

Markbass Compressore Instrukcja

20 Września 2024

Markbass Super Synth Instrukcja

18 Września 2024

Markbass MB Mini Boost Instrukcja

18 Września 2024

Markbass MB Octaver Instrukcja

17 Września 2024

Markbass Bass Tube Marker Instrukcja

17 Września 2024

Markbass MB7 Distorsore Instrukcja

17 Września 2024

Markbass Little Mark 58R Instrukcja

17 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024

Stihl HT 70 Instrukcja

15 Października 2024

Ernesto H14270 Instrukcja

15 Października 2024

Uniden BT MIC KIT Instrukcja

15 Października 2024

Vaude Omnis Bike 26 Instrukcja

15 Października 2024

ART ProChannel II Instrukcja

15 Października 2024

Aukey DR02J Instrukcja

15 Października 2024

Master Lock 653EURD Instrukcja

15 Października 2024

Roland FR-18 Diatonic Instrukcja

15 Października 2024