Instrukcja obsługi Marantz SR-4400

Marantz odbiornik SR-4400

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Marantz SR-4400 (36 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/36
Model SR4400 User Guide
AV Surround Receiver
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the product.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG
TO WIDE SLOT, FULLY INSERT.
ATTENTION:
POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA
LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE
DE LA PRISE ET POUSSER JUSQU’AU FOND.
NOTE TO CATV SYSTEM INSTALLER:
This reminder is provided to call the CATV (Cable-TV) system installer’s attention to Section 820-40 of the
NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
NOTE:
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by tuning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment
and receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV
technician for help.
NOTE:
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.
IMPORTANT SAFETY
INSTRUCTIONS
READ BEFORE OPERATING EQUIPMENT
This product was designed and manufactured to
meet strict quality and safety standards. There are,
however, some installation and operation
precautions which you should be particularly
aware of.
1. Read these instructions - All the safety and
operating instructions should be read before
the product is operated.
2. Keep these instructions - The safety and
operating instructions should be kept for
future reference.
3. Heed all warnings - All warnings on the
product and in the operating instructions
should be adhered to.
4. Follow all instructions - All operating and use
instructions should be followed.
5. Do not use this apparatus near water - Do not
use this product near water-for example, near
a bath tub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming
pool, and the like.
6. Clean only with dry cloth - Unplug this product
from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Use a
dry cloth for cleaning.
7. Do not block any ventilation openings. Install in
accordance with the manufacture's instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.
AC POLARIZED PLUG
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
11. Only use attachments/accessories specified
by the manufacturer.
12. Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
15. This product should not be placed in a built-in
installation such as a bookcase or rack unless
proper ventilation is provided or the
manufacturer's instructions have been
adhered to.
16. Apparatus shall not be exposed to dripping or
splashing and that no objects filled with
liquids, such as vases, shall be placed on the
apparatus.
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la Classe B est conforme
à la norme NMB-003 du Canada.
1
ENGLISH
TABLE OF CONTENTS
INTRODUCTION.................................. 2
CAUTIONS ON INSTALLATION .................................... 2
DESCRIPTION..................................... 2
FEATURES .......................................... 3
ACCESSORIES ................................... 3
FRONT PANEL .................................... 4
FL DISPLAY ................................................................... 4
REAR PANEL ...................................... 5
REMOTE CONTROL OPERATION ..... 6
FUNCTION AND OPERATION ...................................... 6
PROGRAMMING THE REMOTE CONTROLLER ......... 7
OPERATION OF REMOTE CONTROL UNIT ................ 8
GENERAL INFROMATION OF RC5400SR TO SR4400... 9
CONNECTIONS................................. 10
SPEAKER PLACEMENT ............................................. 10
CONNECTING SPEAKERS ......................................... 10
CONNECTING AUDIO COMPONENTS ...................... 11
CONNECTING VIDEO COMPONENTS ...................... 12
ADVANCED CONNECTING ........................................ 13
CONNECTING REMOTE CONTROL JACKS .............. 13
CONNECTING THE ANTENNA TERMINALS .............. 14
SETUP ............................................... 15
SETUP MENU SYSTEM .............................................. 15
ENTER THE DESIRED MENU ITEM OF
THE SETUP MENU ..................................................... 15
SIMPLE SETUP ........................................................... 16
1. INPUT SETUP (ASSIGNABLE DIGITAL INPUT) ..... 16
2. SPEAKER SETUP ................................................... 17
3. PREFERENCE ......................................................... 19
4. PL
II
(DOLBY PRO LOGIC
II
) ............................... 19
5. CS
II
(CIRCLE SURROUND
II
) .............................. 20
6. 6.1 CH INPUT LEVEL .............................................. 20
7. SURROUND ............................................................ 20
BASIC OPERATION (PLAY BACK) .. 21
SELECTING AN INPUT SOURCE. .............................. 21
SELECTING THE SURROUND MODE ....................... 21
ADJUSTING THE MAIN VOLUME .............................. 21
ADJUSTING THE TONE(BASS & TREBLE) CONTROL .. 21
TEMPORARILY TURNING OFF THE SOUND ............ 21
USING THE SLEEP TIMER ......................................... 21
NIGHT MODE .............................................................. 22
SURROUND MODE ........................... 22
OTHER FUNCTION ........................... 25
ATTENUATION TO ANALOG INPUT SIGNAL ............. 25
LISTENING OVER HEADPHONES ............................. 25
DIMMER (DISPLAY) .................................................... 25
SELECTING ANALOG AUDIO INPUT OR DIGITAL AUDIO
INPUT .......................................................................... 25
RECORDING AN ANALOG SOURCE ......................... 25
HT-EQ .......................................................................... 25
6.1 CH INPUT. .............................................................. 25
BASIC OPERATION (TUNER) .......... 26
LISTENING TO THE TUNER ....................................... 26
PRESET MEMORY ...................................................... 26
TROUBLESHOOTING ....................... 28
TECHNICAL SPECIFICATIONS ....... 30
DIMENSION ....................................... 30

Specyfikacje produktu

Marka: Marantz
Kategoria: odbiornik
Model: SR-4400

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Marantz SR-4400, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik Marantz

Marantz

Marantz SR-8000 Instrukcja

15 Stycznia 2025
Marantz

Marantz Model 60n Instrukcja

1 Stycznia 2025
Marantz

Marantz MODEL M4 Instrukcja

9 Października 2024
Marantz

Marantz SR-7200 Instrukcja

6 Października 2024
Marantz

Marantz SR-19 Instrukcja

26 Września 2024
Marantz

Marantz NR1608 Instrukcja

26 Września 2024
Marantz

Marantz NR1510 Instrukcja

23 Września 2024
Marantz

Marantz VS3003 Instrukcja

10 Września 2024
Marantz

Marantz PM5004/ZIL Instrukcja

9 Września 2024
Marantz

Marantz Melody Media MCR503 Instrukcja

8 Września 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

AKAI

AKAI AM-32 Instrukcja

15 Stycznia 2025
Peavey

Peavey CKd 608 Instrukcja

15 Stycznia 2025
OSD Audio

OSD Audio Nero HTX4150 Instrukcja

14 Stycznia 2025
S.M.S.L

S.M.S.L PA200 Instrukcja

14 Stycznia 2025
Pyle

Pyle PFMRA340BB.5 Instrukcja

13 Stycznia 2025
Wavtech

Wavtech link700.4plus Instrukcja

13 Stycznia 2025
Behringer

Behringer NU6000DSP Instrukcja

12 Stycznia 2025
Denon

Denon DRA-935R Instrukcja

12 Stycznia 2025
Kenwood

Kenwood KMM-BT508DAB Instrukcja

12 Stycznia 2025
Boss

Boss DD-500 Instrukcja

12 Stycznia 2025