Instrukcja obsługi Makita UC3051A
Makita
Piły łańcuchowe
UC3051A
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita UC3051A (24 stron) w kategorii Piły łańcuchowe. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/24
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
IMPORTANT: Read Before Using.
Electric Chain Saw
UC3050A
UC3550A
UC3550AP
UC4050A
UC4550A
UC3051A
UC3551A
UC4051A
UC4551A
014371
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model
UC3050A UC3051A UC3550A
UC3550AP
UC3551A UC4050A UC4051A UC4550A
UC4551A
Max. chain speed 14.5 m/s (870 m/min)
Bar length 300 mm 350 mm 400 mm 450 mm
Cutting length 260 mm 320 mm 355 mm 415 mm
Standard guide
bar Guide bar type Sprocket nose bar
Type 91PX
Pitch 3/8"
Standard saw
chain
No. of drive links 46 52 56 62
Recommended guide bar length 300 - 450 mm
Overall length (without guide bar) 505 mm
Net weight 5.4 kg 5.5 kg 5.5 kg 5.6 kg 5.5 kg 5.6 kg 5.7 kg
Extension cable (optional) DIN 57282/HO 7RN -F L=30 m max.,3x1.5 mm
2
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END218-7
Symbol
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual and follow the
warnings and safety instructions.
･ Wear eye protection.
･ Wear ear protection.
･ DOUBLE INSULATION
･ Caution: particular care and attention
required!
･ Caution: withdraw the mains plug
immediately if the cable is damaged!
･ Caution: kickback!
･ Protect against rain and damp!
･ Wear a helmet, goggles and ear
protection!
･ Wear safety gloves!
･ Withdraw the mains plug!
･ First aid
･ Maximum permissible length of cut
･ Direction of chain travel
･ Chain oil
･ Chain brake released
･ Chain brake applied
･ Prohibited!
･ Only for EU countries
Do not dispose of electric equipment
together with household waste
material!
In observance of the European
Directive, on Waste Electric and
Electronic Equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE085-1
Intended use
The tool is intended for cutting lumbers and logs.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
3
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Sound pressure level (L
pA) : 90.8 dB (A)
Sound power level (L
WA) : 101.8 dB (A)
Uncertainty (K) : 2.5 dB (A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode : cutting wood
Vibration emission (ah) : 5.2 m/s2
Uncertainty (K) : 1.5 m/s2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH021-8
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Chain Saw
Model No./ Type:
UC3050A, UC3550A, UC4050A, UC4550A,
UC3051A, UC3551A, UC3550AP, UC4051A,
UC4551A
Specifications: see "SPECIFICATIONS" table.
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN60745
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
The conformity assessment procedure required by
Directive 2000/14/EC was in Accordance with annex V
Measured Sound Power Level: 101.9 dB (A)
Guaranteed Sound Power Level: 103 dB (A)
8.5.2014
000331
Yasushi Fukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
GEA005-3
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
Specyfikacje produktu
| Marka: | Makita |
| Kategoria: | Piły łańcuchowe |
| Model: | UC3051A |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Makita UC3051A, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Piły łańcuchowe Makita
14 Października 2024
10 Października 2024
5 Lipca 2024
4 Lipca 2024
4 Lipca 2024
2 Lipca 2024
Instrukcje Piły łańcuchowe
- Piły łańcuchowe Worx
- Piły łańcuchowe Stihl
- Piły łańcuchowe Stiga
- Piły łańcuchowe MacAllister
- Piły łańcuchowe Black & Decker
- Piły łańcuchowe Einhell
- Piły łańcuchowe Remington
- Piły łańcuchowe Husqvarna
- Piły łańcuchowe Ozito
- Piły łańcuchowe RYOBI
- Piły łańcuchowe Cobra
- Piły łańcuchowe Sterwins
- Piły łańcuchowe Hitachi
- Piły łańcuchowe Craftsman
- Piły łańcuchowe McCulloch
- Piły łańcuchowe Alpina
- Piły łańcuchowe Ronix
- Piły łańcuchowe Poulan
- Piły łańcuchowe Sachs Dolmar
- Piły łańcuchowe Black Max
- Piły łańcuchowe Dolmar
- Piły łańcuchowe Nakayama
Najnowsze instrukcje dla Piły łańcuchowe
15 Października 2024
14 Października 2024
11 Października 2024
10 Października 2024
9 Sierpnia 2024
9 Sierpnia 2024
8 Sierpnia 2024
6 Sierpnia 2024
6 Lipca 2024
6 Lipca 2024