Instrukcja obsługi Makita GA005GZ

Makita młynek GA005GZ

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita GA005GZ (20 stron) w kategorii młynek. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/20

INSTRUCTION MANUAL

Cordless Angle Grinder

GA003G

GA004G

GA005G

GA006G

GA007G

GA008G

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: GA003G GA004G GA005G GA006G GA007G GA008G

Wheel diameter 100 mm

(4″)

115 mm

(4-1/2″)

125 mm

(5″)

100mm

(4″)

115 mm

(4-1/2″)

125 mm

(5″)

Max. wheel thickness 6.4 mm 7.2 mm 6.4 mm 7.2 mm

Spindle thread M10 M14 or 5/8″

(country specic)

M10 M14 or 5/8″

(country specic)

Rated speed (n) 8,500 min-1

Overall length with BL4025 398 mm

with BL4040 410 mm

Net weight

2.8 - 3.3 kg 2.9 - 3.5 kg 2.9 - 3.6 kg 2.7 - 3.3 kg

2.9 - 3.5 kg

Rated voltage D.C. 36 V - 40 V max

• Due to our continuing program of research and development, the specications herein are subject to change

without notice.

• Specications may dier from country to country.

• The weight may dier depending on the attachment(s), including the battery cartridge. The lightest and heavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Battery cartridge BL4025 / BL4040

Charger DC40RA

• Some of the battery cartridges and chargers listed above may not be available depending on your region of

residence.

WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges

and chargers may cause injury and/or re.

Symbols

The followings show the symbols used for the equip-

ment. Be sure that you understand their meaning before

use.

Read instruction manual.

Wear safety glasses.

Ni-MH

Li-ion

Only for EU countries

Do not dispose of electric equipment or

battery pack together with household waste

material!

In observance of the European Directives,

on Waste Electric and Electronic

Equipment and Batteries and Accumulators

and Waste Batteries and Accumulators

and their implementation in accordance

with national laws, electric equipment and

batteries and battery pack(s) that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for grinding, sanding and cutting of

metal and stone materials without the use of water.

Noise

The typical A-weighted noise level determined according to EN60745-2-3:

Model Sound pressure

level (LpA) : (dB(A))

Sound power level

(LWA) : (dB(A))

Uncertainty (K) :

(dB(A))

GA003G 81 92 3

GA004G 81 92 3

GA005G 81 92 3

GA006G 81 92 3

GA007G 81 92 3

GA008G 81 92 3

3 ENGLISH

NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and

may be used for comparing one tool with another.

NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.

WARNING: Wear ear protection.

WARNING: The noise emission during actual use of the power tool can dier from the declared val-

ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.

WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation

of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the

times when the tool is switched o and when it is running idle in addition to the trigger time).

Vibration

The vibration total value (tri-axial vector sum) determined according to EN60745-2-3:

Work mode: surface grinding with normal side grip

Model

Vibration emission (ah,

AG) : (m/s2)

Uncertainty (K) : (m/s2)

GA003G 5.0 1.5

GA004G 5.5 1.5

GA005G 6.5 1.5

GA006G 5.0 1.5

GA007G 5.5 1.5

GA008G 6.5 1.5

Work mode: surface grinding with anti vibration side grip

Model

Vibration emission (ah,

AG) : (m/s2)

Uncertainty (K) : (m/s2)

GA003G 5.5 1.5

GA004G 5.5 1.5

GA005G 5.5 1.5

GA006G 5.5 1.5

GA007G 5.5 1.5

GA008G 5.5 1.5

Work mode: disc sanding with normal side grip

Model

Vibration emission (ah,

AG) : (m/s2)

Uncertainty (K) : (m/s2)

GA003G 2.5 m/s2 or less 1.5

GA004G 2.5 m/s2 or less 1.5

GA005G 2.5 1.5

GA006G 2.5 m/s2 or less 1.5

GA007G 2.5 m/s2 or less 1.5

GA008G 2.5 1.5

Work mode: disc sanding with anti vibration side grip

Model

Vibration emission (ah,

AG) : (m/s2)

Uncertainty (K) : (m/s2)

GA003G 2.5 m/s2 or less 1.5

GA004G 2.5 m/s2 or less 1.5

GA005G 3.0 1.5

GA006G 2.5 m/s2 or less 1.5

GA007G 2.5 m/s2 or less 1.5

GA008G 3.0 1.5

NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method and

may be used for comparing one tool with another.

NOTE: The declared vibration total value(s) may also be used in a preliminary assessment of exposure.

Specyfikacje produktu

Marka:	Makita
Kategoria:	młynek
Model:	GA005GZ
Kolor produktu:	Zielony
Źródło zasilania:	Bateria
Szerokość produktu:	140 mm
Waga produktu:	2900 g
Silnik:	Silnik bezszczotkowy
Regulowana prędkość:	Nie
Prędkość biegu jałowego (max):	8500 RPM
Dołączony akumulator:	Nie
Średnica tarczy szlifierki:	125 mm
Rozmiar dyszy:	22.23 mm
Osłona ochronna:	Tak
Ilość tarcz do przecierania:	1