Instrukcja obsługi Makita EX2650LH

Makita Narzędzie wielofunkcyjne EX2650LH

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita EX2650LH (24 stron) w kategorii Narzędzie wielofunkcyjne. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/24
EX2650LH
Multi Function Power Head
EX2650LH
WARNING:
Read this instruction manual carefully before putting the Multi Function Power Head into operation and
strictly observe the safety regulations!
Save instruction manual for future reference.
INSTRUCTION MANUAL
2
Thank you very much for purchasing the MAKITA Multi Function Power Head.
We are pleased to recommend to you the MAKITA Multi Function Power Head
which is the result of a long development programme and many years of
knowledge and experience.
Please read this booklet which refers in detail to the various points that will
demonstrate its outstanding performance. This will assist you to obtain the best
possible result from your MAKITA Multi Function Power Head.
You will note the following symbols when reading the instructions manual.
Read instruction manual and follow the
warnings and safety precautions!
Wear protective helmet, eye and ear
protection!
Take particular care and attention! Fuel (Gasoline)
Forbidden! Engine-manual start
No smoking! Emergency stop
No open ame! First aid
Protective gloves must be worn! ON/START
Wear sturdy boots with nonslip soles.
Steeltoed safety boots are recommended! OFF/STOP
Keep the area of operation clear of all
persons and pets!
English
(Original instructions)
Table of Contents Page
Symbols .........................................................................2
Safety instructions .........................................................3
Technical data................................................................6
Approved attachments...................................................7
Designation of parts.......................................................8
Mounting of handle ........................................................9
Mounting attachment .....................................................9
Disassembling .............................................................10
Before start of operation .............................................. 11
Correct handling of machine........................................13
Points in operation and how to stop ............................13
Servicing instructions...................................................16
Storage ........................................................................19
3
General instructions
To ensure correct operation, user has to read this instruction manual to make -
himself familiar with the handling of the Multi Function Power Head. Users
insufciently informed will risk danger to themselves as well as others due to
improper handling.
It is recommended only to lend the Multi Function Power Head to people who -
have proven to be experienced with Multi Function Power Heads.
Always hand over the instruction manual.
First users should ask the dealer for basic instructions to familiarize oneself -
with the handling of an engine powered cutter.
Children and young persons aged under 18 years must not be allowed to -
operate the Multi Function Power Head. Persons over the age of 16 years
may however use the device for the purpose of being trained only whilst
under supervision of a qualied trainer.
Use Multi Function Power Heads with the utmost care and attention. -
Operate the Multi Function Power Head only if you are in good physical -
condition. Perform all work calmly and carefully. The user has to accept
liability for others.
Never use the Multi Function Power Head after consumption of alcohol or -
drugs, or if feeling tired or ill.
National regulation can restrict the use of the machine. -
Personal protective equipment
The clothing worn should be functional and appropriate, i.e. it should be tight- -
tting but not cause hindrance. Do not wear either jewelry or clothing which
could become entangled with bushes or shrubs.
In order to avoid either head-, eye-, hand-or foot injuries as well as to protect -
your hearing the following protective equipment and protective clothing must
be used during operation of the Multi Function Power Head.
Always wear a helmet where there is a risk of falling objects. The protective -
helmet (1) is to be checked at regular intervals for damage and is to be
replaced at the latest after 5 years. Use only approved protective helmets.
The visor (2) of the helmet (or alternatively goggles) protects the face from -
ying debris and stones. During operation of the Multi Function Power Head
always wear goggles, or a visor to prevent eye injuries.
Wear adequate noise protection equipment to avoid hearing impairment (ear -
muffs (3), ear plugs etc.).
The work overalls (4) protect against ying stones and debris. -
We strongly recommend that the user wears work overalls.
Special gloves (5) made of thick leather are part of the prescribed equipment -
and must always be worn during operation of the Multi Function Power Head.
When using the Multi Function Power Head, always wear sturdy shoes (6) -
with a non-slip sole. This protects against injuries and ensures a good footing.
Starting up the Multi Function Power Head
Please make sure that there are no children or other people, also pay -
attention to any animals in the working vicinity.
Make sure that the attachment is attached in place, the control lever for easy -
action and check for proper functioning of the lock-off lever.
Motion of the attachment during idling speed is not allowed. Check with your -
dealer for adjustment if in doubt. Check for clean and dry handles and test
the function of the start/stop switch.
15 Meters
Diagrammatic gure
Intended use of the machine
This multi function power head is intended for driving an approved attachment
listed in this instruction manual. Never use the machine for the other purpose.

Specyfikacje produktu

Marka: Makita
Kategoria: Narzędzie wielofunkcyjne
Model: EX2650LH

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Makita EX2650LH, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Narzędzie wielofunkcyjne Makita

Makita

Makita DTM52Z Instrukcja

9 Października 2024
Makita

Makita 196752-0 Instrukcja

29 Września 2024
Makita

Makita TM30DSMJX4 Instrukcja

16 Września 2024
Makita

Makita 195711-1 Instrukcja

10 Września 2024
Makita

Makita TD110D Instrukcja

8 Września 2024
Makita

Makita TM3000CX1J Instrukcja

5 Września 2024
Makita

Makita 199339-7 Instrukcja

4 Września 2024
Makita

Makita BTM50RFEX3 Instrukcja

4 Września 2024
Makita

Makita DTM51ZJX3 Instrukcja

2 Września 2024
Makita

Makita DUX60PT2 Instrukcja

2 Września 2024

Instrukcje Narzędzie wielofunkcyjne

Najnowsze instrukcje dla Narzędzie wielofunkcyjne

Black & Decker

Black & Decker MT18 Instrukcja

11 Stycznia 2025
Vonroc

Vonroc OT505DC Instrukcja

9 Stycznia 2025
Workzone

Workzone WZMS 10,8 Li Instrukcja

31 Grudnia 2025
Einhell

Einhell TE-MG 18/1 Li Instrukcja

30 Grudnia 2025
EGO

EGO MRC2306E Instrukcja

28 Grudnia 2024
Powerblade

Powerblade PC4MT5 Instrukcja

10 Grudnia 2024
EGO

EGO PH1420E Instrukcja

8 Grudnia 2024
Parkside

Parkside PAMFW 20-Li A1 Instrukcja

15 Października 2024
Güde

Güde GGF 620 Instrukcja

14 Października 2024
Ozito

Ozito PXPPHTK-258 Instrukcja

8 Października 2024