Instrukcja obsługi Makita DTM52Z

Makita Narzędzie wielofunkcyjne DTM52Z

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita DTM52Z (34 stron) w kategorii Narzędzie wielofunkcyjne. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/34
INSTRUCTION MANUAL
Cordless Multi Tool
DTM52
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DTM52
Oscillation per minute 10,000 - 20,000 min
-1
Oscillation angle, left/right 1.8° (3.6° total)
Overall length with BL1820B 305 mm
with BL1860B 322 mm
Net weight 1.7 - 2.0 kg
Rated voltage D.C. 18 V
•
Due to our continuing program of research and development, the specications herein are subject to change without notice.
• Specications may dier from country to country.
• The weight may dier depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or re.
Applicable application tool
Use the application tool which type is adaptable to this
tool as shown in the following table.
OIS
STARLOCK PLUS
STARLOCK
STARLOCK MAX
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Wear safety glasses.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for sawing and cutting wood,
plastic, gypsum, non-ferrous metals, and fastening
elements (e.g. nails and staples). It is also intended for
working soft wall tiles, as well as dry sanding and scrap-
ing of small surfaces. It is especially for working close to
edge and ush cutting.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-2-4:
Work mode: Sanding
Sound pressure level (L
pA) : 69 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
The typical A-weighted noise level determined accord-
ing to EN62841-1:
Work mode: Cutting with plunge cut saw blade
Sound pressure level (L
pA) : 72 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
3 ENGLISH
The typical A-weighted noise level determined accord-
ing to EN62841-1:
Work mode: Cutting with segmental saw blade
Sound pressure level (L
pA) : 76 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
The typical A-weighted noise level determined accord-
ing to EN62841-1:
Work mode: Scraping
Sound pressure level (L
pA) : 71 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual
use of the power tool can dier from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o and when it is running idle in addition to the
trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-2-4:
Work mode: Sanding
Vibration emission (a
h) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s
2
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-1:
Work mode: Cutting with plunge cut saw blade
Vibration emission (a
h) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s
2
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-1:
Work mode: Cutting with segmental saw blade
Vibration emission (a
h) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s
2
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-1:
Work mode: Scraping
Vibration emission (a
h) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s
2
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
WARNING: The vibration emission during
actual use of the power tool can dier from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o and when it is running idle in addition to the
trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and specications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, re and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.

Specyfikacje produktu

Marka: Makita
Kategoria: Narzędzie wielofunkcyjne
Model: DTM52Z

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Makita DTM52Z, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Narzędzie wielofunkcyjne Makita

Makita

Makita DTM52Z Instrukcja

9 Października 2024
Makita

Makita 196752-0 Instrukcja

29 Września 2024
Makita

Makita TM30DSMJX4 Instrukcja

16 Września 2024
Makita

Makita 195711-1 Instrukcja

10 Września 2024
Makita

Makita TM3000C Instrukcja

24 Sierpnia 2024
Makita

Makita BTM50 Instrukcja

14 Sierpnia 2024

Instrukcje Narzędzie wielofunkcyjne

Najnowsze instrukcje dla Narzędzie wielofunkcyjne

Parkside

Parkside PAMFW 20-Li A1 Instrukcja

15 Października 2024
Güde

Güde GGF 620 Instrukcja

14 Października 2024
Ozito

Ozito PXPPHTK-258 Instrukcja

8 Października 2024
Powerfix

Powerfix PMW 2 B1 Instrukcja

8 Października 2024
Worx

Worx WX822L Instrukcja

8 Października 2024
Ozito

Ozito PXGMTK-2536 Instrukcja

7 Października 2024
Einhell

Einhell BT-MG 180/1 Instrukcja

7 Października 2024
Lezyne

Lezyne Tool Insert Kit Instrukcja

4 Października 2024
Lezyne

Lezyne Multi Chain Pliers Instrukcja

4 Października 2024
Porter-Cable

Porter-Cable PCCE720 Instrukcja

4 Października 2024