Instrukcja obsługi Makita DUN461WZ

Makita nożyce do żywopłotu DUN461WZ

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita DUN461WZ (16 stron) w kategorii nożyce do żywopłotu. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

INSTRUCTION MANUAL

Cordless Pole Hedge Trimmer

DUN461W

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: DUN461W

Blade length 460 mm

Strokes per minute 3,600 min-1

Cutting blade angle 135° (up 60°, down 75°)

Overall length 1,889 - 2,511 mm

Rated voltage D.C. 18 V

Net weight 3.0 - 3.3 kg

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydierfromcountrytocountry.

• Theweightmaydierdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Batterycartridge BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B

Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /

DC18SH

• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof

residence.

WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges

andchargersmaycauseinjuryand/orre.

Recommended cord connected power source

Portable power pack PDC01

• Thecordconnectedpowersource(s)listedabovemaynotbeavailabledependingonyourregionofresidence.

• Beforeusingthecordconnectedpowersource,readinstructionandcautionarymarkingsonthem.

Symbols

Thefollowingsshowthesymbolswhichmaybeused

fortheequipment.Besurethatyouunderstandtheir

meaning before use.

Read instruction manual.

Do not expose to moisture.

Wear a helmet, goggles and ear protection.

DANGER-Keephandsawayfromblade.

Beware of electrical lines, risk of electrical

shock.

Keep distance at least 15 m.

Ni-MH

Li-ion

OnlyforEUcountries

Due to the presence of hazardous com-

ponents in the equipment, waste electrical

and electronic equipment, accumulators

andbatteriesmayhaveanegativeimpact

on the environment and human health.

Do not dispose of electrical and electronic

appliances or batteries with household waste!

In accordance with the European Directive

on waste electrical and electronic equip-

ment and on accumulators and batteries

and waste accumulators and batteries,

as well as their adaptation to national law,

waste electrical equipment, batteries and

accumulatorsshouldbestoredseparately

and delivered to a separate collection point

for municipal waste, operating in accor-

dance with the regulations on environmen-

tal protection.

Thisisindicatedbythesymbolofthe

crossed-out wheeled bin placed on the

equipment.

Guaranteed sound power level according

to EU Outdoor Noise Directive.

Sound power level according to Australia

NSW Noise Control Regulation

Intended use

The tool is intended for trimming hedges.

3 ENGLISH

Noise

ThetypicalA-weightednoiseleveldeterminedaccord-

ing to EN62841-4-2:

Sound pressure level (LpA ) : 74 dB(A)

Uncertainty(K):3dB(A)

Thenoiselevelunderworkingmayexceed80dB(A).

NOTE:

The declared noise emission value(s) has been

measured in accordance with a standard test method

andmaybeusedforcomparingonetoolwithanother.

NOTE:

Thedeclarednoiseemissionvalue(s)may

alsobeusedinapreliminaryassessmentofexposure.

WARNING: Wear ear protection.

WARNING:

The noise emission during actual

use of the power tool can dier from the declared

value(s) depending on the ways in which the tool is

used especially what kind of workpiece is processed.

WARNING:

Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (tak-

ing account of all parts of the operating cycle such

as the times when the tool is switched o and when

it is running idle in addition to the trigger time).

Vibration

Applicable standard : EN62841-4-2

Left hand (Front grip) Right hand (Rear grip)

ah (m/s2)UncertaintyK(m/s2) ah (m/s2)UncertaintyK(m/s2)

2.5 m/s2 or less 2.5 m/s1.5 2 or less 1.5

NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method and

maybeusedforcomparingonetoolwithanother.

NOTE:Thedeclaredvibrationtotalvalue(s)mayalsobeusedinapreliminaryassessmentofexposure.

WARNING: The vibration emission during actual use of the power tool can dier from the declared

value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.

WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation

of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the

times when the tool is switched o and when it is running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

TheECdeclarationofconformityisincludedasAnnexA

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings, instruc-

tions, illustrations and specications provided with this

power tool. Failure to follow all instructions listed below

mayresultinelectricshock,reand/orseriousinjury.

Save all warnings and instruc-

tions for future reference.

Theterm"powertool"inthewarningsreferstoyour

mains-operated(corded)powertoolorbattery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

whichmayignitethedustorfumes.

Keep children and bystanders away while operating

a power tool.Distractionscancauseyoutolosecontrol.

Electrical safety

1. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiedplugsandmatchingoutletswill

reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tricshockifyourbodyisearthedorgrounded.

3. Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

If operating a power tool in a damp location is unavoid-

able, use a residual current device (RCD) protected

supply. Use of an RCD reduces the risk of electric shock.

7. Power tools can produce electromagnetic

elds (EMF) that are not harmful to the user.

However, users of pacemakers and other similar

medical devices should contact the maker of their

device and/or doctor for advice before operating

this power tool.

Specyfikacje produktu

Marka:	Makita
Kategoria:	nożyce do żywopłotu
Model:	DUN461WZ

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Makita DUN461WZ, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje nożyce do żywopłotu Makita

Makita UH5520 Instrukcja

4 Października 2024

Makita UN5400 Instrukcja

27 Września 2024

Makita UH5570 Instrukcja

20 Września 2024

Makita DUH604SRT Instrukcja

16 Września 2024

Makita DUN461WZ Instrukcja

11 Września 2024

Makita DUH523RT Instrukcja

11 Września 2024

Makita EN7350SH Instrukcja

10 Września 2024

Makita DUH523 Instrukcja

5 Września 2024

Makita UH200DWX Instrukcja

3 Września 2024

Makita UH008G Instrukcja

31 Sierpnia 2024

Instrukcje nożyce do żywopłotu

Najnowsze instrukcje dla nożyce do żywopłotu

Kibani WPET1206 - XXL Instrukcja

15 Października 2024

Tanaka THT-2000SB Instrukcja

15 Października 2024

Black & Decker BHT518 Instrukcja

14 Października 2024

MacAllister MHTP24EB Instrukcja

13 Października 2024

Husqvarna 226HS99S Instrukcja

12 Października 2024

Husqvarna 122HD60 Instrukcja

11 Października 2024

Florabest FHT 600 B2 Instrukcja

11 Października 2024

Ozito PXCGSS-018 Instrukcja

10 Października 2024

Einhell Royal HEC 551 Instrukcja

9 Października 2024

Dolmar HT-2460 Instrukcja

9 Października 2024