Instrukcja obsługi Makita DUN461WRT

Makita nieskategoryzowany DUN461WRT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita DUN461WRT (16 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

INSTRUCTION MANUAL

Cordless Pole Hedge Trimmer

DUN461W

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: DUN461W

Blade length 460 mm

Strokes per minute 3,600 min-1

Cutting blade angle 135° (up 60°, down 75°)

Overall length 1,889 - 2,511 mm

Rated voltage D.C. 18 V

Net weight 3.0 - 3.3 kg

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydierfromcountrytocountry.

• Theweightmaydierdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Batterycartridge BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B

Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /

DC18SH

• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof

residence.

WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges

andchargersmaycauseinjuryand/orre.

Recommended cord connected power source

Portable power pack PDC01

• Thecordconnectedpowersource(s)listedabovemaynotbeavailabledependingonyourregionofresidence.

• Beforeusingthecordconnectedpowersource,readinstructionandcautionarymarkingsonthem.

Symbols

Thefollowingsshowthesymbolswhichmaybeused

fortheequipment.Besurethatyouunderstandtheir

meaning before use.

Read instruction manual.

Do not expose to moisture.

Wear a helmet, goggles and ear protection.

DANGER-Keephandsawayfromblade.

Beware of electrical lines, risk of electrical

shock.

Keep distance at least 15 m.

Ni-MH

Li-ion

OnlyforEUcountries

Due to the presence of hazardous com-

ponents in the equipment, waste electrical

and electronic equipment, accumulators

andbatteriesmayhaveanegativeimpact

on the environment and human health.

Do not dispose of electrical and electronic

appliances or batteries with household waste!

In accordance with the European Directive

on waste electrical and electronic equip-

ment and on accumulators and batteries

and waste accumulators and batteries,

as well as their adaptation to national law,

waste electrical equipment, batteries and

accumulatorsshouldbestoredseparately

and delivered to a separate collection point

for municipal waste, operating in accor-

dance with the regulations on environmen-

tal protection.

Thisisindicatedbythesymbolofthe

crossed-out wheeled bin placed on the

equipment.

Guaranteed sound power level according

to EU Outdoor Noise Directive.

Sound power level according to Australia

NSW Noise Control Regulation

Intended use

The tool is intended for trimming hedges.

3 ENGLISH

Noise

ThetypicalA-weightednoiseleveldeterminedaccord-

ing to EN62841-4-2:

Sound pressure level (LpA ) : 74 dB(A)

Uncertainty(K):3dB(A)

Thenoiselevelunderworkingmayexceed80dB(A).

NOTE:

The declared noise emission value(s) has been

measured in accordance with a standard test method

andmaybeusedforcomparingonetoolwithanother.

NOTE:

Thedeclarednoiseemissionvalue(s)may

alsobeusedinapreliminaryassessmentofexposure.

WARNING: Wear ear protection.

WARNING:

The noise emission during actual

use of the power tool can dier from the declared

value(s) depending on the ways in which the tool is

used especially what kind of workpiece is processed.

WARNING:

Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (tak-

ing account of all parts of the operating cycle such

as the times when the tool is switched o and when

it is running idle in addition to the trigger time).

Vibration

Applicable standard : EN62841-4-2

Left hand (Front grip) Right hand (Rear grip)

ah (m/s2)UncertaintyK(m/s2) ah (m/s2)UncertaintyK(m/s2)

2.5 m/s2 or less 2.5 m/s1.5 2 or less 1.5

NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method and

maybeusedforcomparingonetoolwithanother.

NOTE:Thedeclaredvibrationtotalvalue(s)mayalsobeusedinapreliminaryassessmentofexposure.

WARNING: The vibration emission during actual use of the power tool can dier from the declared

value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.

WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation

of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the

times when the tool is switched o and when it is running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

TheECdeclarationofconformityisincludedasAnnexA

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings, instruc-

tions, illustrations and specications provided with this

power tool. Failure to follow all instructions listed below

mayresultinelectricshock,reand/orseriousinjury.

Save all warnings and instruc-

tions for future reference.

Theterm"powertool"inthewarningsreferstoyour

mains-operated(corded)powertoolorbattery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

whichmayignitethedustorfumes.

Keep children and bystanders away while operating

a power tool.Distractionscancauseyoutolosecontrol.

Electrical safety

1. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiedplugsandmatchingoutletswill

reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tricshockifyourbodyisearthedorgrounded.

3. Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

If operating a power tool in a damp location is unavoid-

able, use a residual current device (RCD) protected

supply. Use of an RCD reduces the risk of electric shock.

7. Power tools can produce electromagnetic

elds (EMF) that are not harmful to the user.

However, users of pacemakers and other similar

medical devices should contact the maker of their

device and/or doctor for advice before operating

this power tool.

Specyfikacje produktu

Marka:	Makita
Kategoria:	nieskategoryzowany
Model:	DUN461WRT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Makita DUN461WRT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje nieskategoryzowany Makita

Makita DJS101 Instrukcja

16 Września 2024

Makita DHP484TJX9 Instrukcja

29 Maja 2024

Makita DST221 Instrukcja

25 Maja 2024

Makita DCG180ZBK Instrukcja

21 Maja 2024

Makita DKP181 Instrukcja

21 Maja 2024

Makita LS1216FL Instrukcja

20 Maja 2024

Makita CL001GD225 Instrukcja

19 Maja 2024

Makita DUN461WRT Instrukcja

19 Maja 2024

Makita DFT022F Instrukcja

19 Maja 2024

Makita CL003G Instrukcja

19 Maja 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024

Emko EZM-9920 Instrukcja

27 Października 2024

Emko ESM-3712-H Instrukcja

27 Października 2024

Emko ATS-10 Instrukcja

27 Października 2024

Emko EAOM-11.2 Instrukcja

27 Października 2024

Emko EPM-3790 Instrukcja

27 Października 2024

Emko EPM-7790 Instrukcja

27 Października 2024

Livarno Lux IAN 108340 Instrukcja

27 Października 2024

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024