Instrukcja obsługi Makita 181490-7

Makita Hamer 181490-7

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita 181490-7 (7 stron) w kategorii Hamer. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/7
No.M-8038 MATERIAL SAFETY DATA SHEET Page 1 of 7
Date of Issue: May 15, 2008 Revised Date: May 17,2012
SECTION 1 IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product Name: MAKITA GREASE R No.00
Use of the product: Lubricating grease.
Product Code: None.
Company Name: NIPPECO LTD.
Address: 385-14 SHIINOMORI SODEGAURA CHIBA 299-0247 JAPAN
Telephone Number: +81-438-60-2180
SECTION2 HAZARDS IDENTIFICATION
EU Information:
Classification(67/548/EEC
or 1999/45EC):
Not classified.
Classification(EC1272/2008):
Physical Hazards: Flammable solids: Not classified.
Pyrophoric solid: Not classified.
Self-heating substances and mixtures: Not classified.
Corrosive to metals: Not classified.
Health Hazards: Acute toxicity(oral): Not classified.
Acute toxicity(dermal): Not classified.
Acute toxicity(inhalation: mist): Classification not possible.
Skin corrosion/irritation: Classification not possible.
Serious eye damage/eye irritation: Classification not possible.
Sensitization-respiratory: Classification not possible.
Sensitization-skin: Classification not possible.
Germ cell mutagenicity: Classification not possible.
Carcinogenicity: Classification not possible.
Toxic to reproduction: Classification not possible.
Specific target organ systemic toxicity
following single exposure: Classification not possible.
Specific target organ systemic toxicity
following repeated exposure: Classification not possible.
Aspiration toxicity: Classification not possible.
Environmental Hazards: Hazardous to the aquatic environment-Acute
hazard: Classification not possible.
Hazardous to the aquatic
environment-Chronic hazard: Classification not possible.
The hazards without the above mention are Not applicable or Classification not possible.
Hazard Pictogram(s): No pictogram.
Signal Word(s): No signal word.
Hazard Statement(s): No hazard statement.
Precautionary Statement(s):
No.M-8038 MATERIAL SAFETY DATA SHEET Page 2 of 7
Date of Issue: May 15, 2008 Revised Date: May 17,2012
Prevention: Not required.
Response: Not required.
Storage: Not required.
Disposal: Not required.
Other Hazards: Combustibility. Keep away from ignition sources such as heat/sparks/open flames.
SECTION3 COMPOSITION/INFORMATION ON INGREDIENTS
Ingredient(s):
Chemical Name
/ Generic Name
CAS# EC# Wt% EU
symbol
EU
R-Phrase
USA
OSHA PEL
ACGIH
TLV
EU
ILV
DFG
MAK
Refined mineral
base oil
Confidential
Confidential
45-55 None
None
5mg/m
3
(TWA
as oil mist)
5mg/m3
(TWA
as oil mist)
Not
established
Not
established
Synthetic
hydrocarbon base
oil
Confidential Confidential 40-50 None None Not
established
Not
established
Not
established
Not
established
Lithium soap
thickener
Confidential Confidential 1- 10 None None Not
established
Not
established
Not
established
Not
established
Additives Confidential Confidential
1- 5
None
None
Not
established
Not
established
Not
established
Not
established
(Organic
molybdenum.)
68412-26-0 270-180-5 1 None None 15 mg/m3
TWATotal
dust as Mo
10 mg/m3
TWA
Insoluble
compounds,
as Mo
Not
established Not
established
Carcinogen:
Chemical Name: None. CAS#: Reference:
No component of this product is listed as a human carcinogen or a potential carcinogen in IARC MonographsU.S. NTP, OSHA
regulation, and Annex of Regulation (EC) 1272/2008.
Refined mineral base oil, by definition, is considered hazardous according to OSHA. Because it carries Threshold limit value(TLV)
for mineral oil mist. Refined mineral base oil contain <3.0% DMSO extractable material.
PBT substance and vPvB substance:
Chemical Name: None. CAS#: Category:
No component of this product is a PBT or vPvB substance under Regulation (EC)1907/2006.
SECTION 4 FIRST AID MEASURES
First Aid Measures:
Inhalation: Remove exposed person to fresh air if adverse effects are observed.
Ingestion: Do not make person vomit unless directed to do so by medical personnel.
Eye: Flush immediately with water for at least 15 minutes. Get immediate medical attention.
Skin: Wash with soap and water. Get medical attention if irritation develops.
Note to Physicians: Treat symptomatically.
No.M-8038 MATERIAL SAFETY DATA SHEET Page 3 of 7
Date of Issue: May 15, 2008 Revised Date: May 17,2012
SECTION 5 FIRE FIGHTING MEASURES
Extinguishing Media:
Extinguishing Media: Use water fog, foam, dry chemical or carbon dioxide to extinguish flames.
Unsuitable
Extinguishing Media:
DO NOT use forcible water.
Special Fire
Fighting Procedures:
Wear self-contained breathing apparatus and protective clothing if involved in a fire of other
materials.
Unusual Fire and
Explosion Hazards:
Not known.
Special Hazards Arising from the Substance or Mixture:
Hazardous Combustion
Products:
CO, CO2
Oxides of sulfur
Other Properties: None.
Advice for firefighters: None.
SECTION 6 ACCIDENTAL RELEASE MEASURES
Personal precautions, protective
equipment and emergency
procedures:
Eliminate all ignition sources. Evacuate surrounding areas.
Environmental Precautions: Should be prevented from contaminating soil or from entering sewage and drainage systems and
bodies of water.
Methods and Material for
Containment and Cleaning up:
Sweep material and place in a disposal container. Dispose of via a licensed waste disposal
contractor.
Reference to Other Sections: None.
SECTION 7 HANDLING AND STORAGE
Precautions for Safe Handling: Put on appropriate personal protective equipment (see SECTION8). Workers should wash
hands and face before eating, drinking and smoking. Avoid contact with eyes, skin and
clothing. Avoid breathing vapor or mist. Keep in the original container or an approved alternative
made from a compatible material, kept tightly closed when not in use. Empty containers retain
product residue and can be hazardous. Do not reuse container.
Conditions for Safe Storage,
Including Any
Incompatibilities:
Store in a cool, dry place with adequate ventilation. Keep away from open flames and high
temperatures.
Specific End Uses: Lubricating grease.


Specyfikacje produktu

Marka: Makita
Kategoria: Hamer
Model: 181490-7

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Makita 181490-7, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą