Instrukcja obsługi Mackie HR624 MK2

Mackie monitor HR624 MK2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Mackie HR624 MK2 (20 stron) w kategorii monitor. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/20

O W N E R ’ S M A N U A L

HR624 MK2

High Resolution Active Studio Monitor

HR624 MK2

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth. Use a non-scratch cloth to protect the ﬁnish.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including ampliﬁers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other.

A grounding-type plug has two blades and a third grounding prong.

The wide blade or the third prong are provided for your safety. If the

provided plug does not ﬁt into your outlet, consult an electrician for

replacement of the obsolete outlet.

10.

Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

apparatus.

11.

Only use attachments/accessories speciﬁed by the manufacturer.

12.

Use only with a cart, stand, tripod, bracket, or

table speciﬁed by the manufacturer, or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to

avoid injury from tip-over.

13.

Unplug this apparatus during lightning storms or when unused for long

periods of time.

14.

Refer all servicing to qualiﬁed service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

15.

This apparatus shall not be exposed to dripping or splashing, and no

object ﬁlled with liquids, such as vases, shall be placed on the apparatus.

16.

Note that this apparatus is not completely disconnected from the AC

mains service when the power switch is in the OFF position.

17.

The MAINS plug or an appliance coupler is used as the disconnect

device, so the disconnect device shall remain readily operable.

18.

Exposure to extremely high noise levels may cause permanent hearing

loss. Individuals vary considerably in susceptibility to noise-induced

hearing loss, but nearly everyone will lose some hearing if exposed to

sufﬁciently intense noise for a period of time. The U.S. Government’s

Occupational Safety and Health Administration (OSHA) has speciﬁed

the permissible noise level exposures shown in the following chart.

According to OSHA, any exposure in excess of these permissible limits

could result in some hearing loss. To ensure against potentially danger-

ous exposure to high sound pressure levels, it is recommended that all

persons exposed to equipment capable of producing high sound pres-

sure levels use hearing protectors while the equipment is in operation.

Ear plugs or protectors in the ear canals or over the ears must be worn

when operating the equipment in order to prevent permanent hearing

loss if exposure is in excess of the limits set forth here.

IMPORTANT SAFETY INSTRUCTIONS

Correct disposal of this product. This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE Directive (2002/96/EC) and your national law. This product

should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of waste could have a possible negative impact on the environment and

human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural

resources. For more information about where you can drop off your waste equipment for recycling, please contact your local city ofﬁce, waste authority, or your household waste disposal service.

PORTABLE CART

WARNING

CAUTION AVIS

RISK OF ELECTRIC . DO NOT OPENSHOCK

RISQUE DE ELECTRIQUE. NE PAS OUVRIRCHOC

CAUTION: REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK)TO

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING QUALIFIED PERSONNELTO

ATTENTION: POUR EVITER LES RISQUES DE CHOC ELECTRIQUE, NE PAS ENLEVER LE COUVERCLE.

AUCUN ENTRETIEN DE PIECES INTERIEURES PAR L'USAGER.

CONFIER L'ENTRETIEN AU PERSONNEL QUALIFIE.

AVIS: POUR EVITER LES RISQUES D'INCENDIE OU D'ELECTROCUTION, N'EXPOSEZ S CET PA ARTICLE

A A LA PLUIE OU L'HUMIDITE

The lightning flash with arrowhead symbol within an equilateral triangle is

intended to alert the user to the presence of uninsulated "dangerous

voltage" within the product's enclosure, that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

Le symbole éclair avec point de flèche à l'intérieur d'un triangle équilatéral

est utilisé pour alerter l'utilisateur de la présence à l'intérieur du coffret de

"voltage dangereux" non isolé d'ampleur suffisante pour constituer un risque

d'éléctrocution.

The exclamation point within an equilateral triangle is intended to alert the

user of the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

Le point d'exclamation à l'intérieur d'un triangle équilatéral est employé

pour alerter les utilisateurs de la présence d'instructions importantes pour le

fonctionnement et l'entretien (service) dans le livret d'instruction

accompagnant l'appareil.

Duration,

per day in

hours

Sound Level

dBA, Slow

Response

Typical Example

8 90 Duo in small club

6 92

4 95 Subway Train

3 97

2 100 Very loud classical music

1.5 102

1 105 Matt screaming at Troy about

deadlines

0.5 110

0.25 or less 115 Loudest parts at a rock concert

WARNING — To reduce the risk of ﬁre or electric shock, do not

expose this apparatus to rain or moisture.

Owner’s Manual

INTRODUCTION

• The ampliers are designed to provide maximum

acoustic output from the speakers, yet minimize

the danger of speaker damage due to overdriving.

• In addition, the ampliers’ gain and frequency

responses are individually hand-trimmed to

compensate for typical manufacturing tolerances

between the drivers and produce a smooth

frequency response from 45 Hz to 20 kHz.

• The connecting wires between the amplier outputs

and the drivers are kept to an absolute minimum,

so the damping factor of the amplier isn’t

compromised by the resistance of long speaker

cables.

• The acoustic sum of the outputs from the two

drivers are optimized electronically, as well as

physically, so the amplitude response is unity and

the phase difference is minimal.

In short, all the complex interconnected components

in the system are designed to work in harmony with

each other to produce the best possible sound.

The Transducers...

The monitors feature a 6.7-inch high-precision, low-

distortion woofer and a 1-inch ferrouid cooled titanium

dome tweeter on the front, and a 6-inch x 9-inch

elliptical at piston passive radiator in the back.

The high-frequency driver is mounted on a massive,

acoustically non-resonant die-cast aluminum

exponential waveguide, which results in wide,

controlled

dispersion of high-frequency sounds. The

unique passive

radiator design provides a smooth

response down to 45 Hz – an astounding

accomplishment for a cabinet of this size! And since

the radiator is producing most of the sound at the

lowest frequencies, there is very little distortion from

the woofer because its cone movement is minimal at

those frequencies.

Thank you for choosing the Mackie HR624 MK2 Studio

Monitors. We began producing the original HR624

Studio Monitors in 2001, the baby brother to our agship

HR824 Studio Monitors. The HR624 MK2s have been

redesigned with modern components for improved

accuracy and an extended low-frequency response.

Investments in Excellence...

When we decided it was time to update the HR624s,

we turned to our expert loudspeaker and transducer

design engineering team at EAW to determine how to

make an already excellent studio monitor even better.

The rst thing they noticed was that the front bafe

could be redesigned with a rounder aluminum

construction to further reduce edge diffraction for

improved imaging. The volume of the cabinet was

increased slightly to improve the low-frequency

response. The ampliers have been adjusted with all

new ‘voicing’ to match the new cabinets. However, the

ampliers’ design is fundamentally the same and has a

very similar characteristic to the original model. If you

are upgrading from the original HR624s, you won’t have

to relearn the sound. The MK2s still deliver the clarity,

ultra-linear frequency response, and broad stereo

imaging of the originals.

An elegant piano-black gloss nish emphasizes that

these studio monitors are in a class by themselves,

pleasing to the most discerning eye as well as the most

discerning ear.

The result? The HR624 MK2 Studio Monitors are

extremely accurate and versatile, loaded with unique

controls that allow you to ne-tune the sound to match

your individual environment precisely. You’re gonna love

these!

What are they? The Advantages...

The HR624 MK2 Studio Monitors are high-

resolution

, two-way, bi-amplied, active monitors

employing a 6th-order Butterworth system with a

built-in rear-ring mass-loaded passive radiator.

Whew! There are many benets to integrating an

active crossover, power ampliers, and drivers into

a single cabinet, and we’ve taken full advantage of

these benets in the design of the HR624 MK2.

•

The crossover point is designed so that the

high- and low-frequency drivers are fed only the

frequencies they are best able to reproduce.

Figure 1. HR624 MK2 Cutaway side view

TweeterWoofer

Passive Radiator

Power Amplifier/

Crossover Assembly

Specyfikacje produktu

Marka:	Mackie
Kategoria:	monitor
Model:	HR624 MK2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Mackie HR624 MK2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje monitor Mackie

Mackie HR624 MK2 Instrukcja

5 Września 2024

Mackie HR824mk2 Instrukcja

30 Sierpnia 2024

Instrukcje monitor

Najnowsze instrukcje dla monitor

Acer EB321HQUDbmidphx Instrukcja

15 Października 2024

Bauhn APMTR-0624 Instrukcja

15 Października 2024

Acer KA270H Instrukcja

14 Października 2024

Acer K272HUL Dbmidpx Instrukcja

14 Października 2024

NEC E424 Instrukcja

14 Października 2024

LG UltraGear 32GS85Q Instrukcja

14 Października 2024

LG UltraGear 27GS85Q Instrukcja

14 Października 2024

Hannspree Hanns.G HP 225 PJB Instrukcja

13 Października 2024

Acer EK220QB Instrukcja

13 Października 2024

Acer S242HL Instrukcja

12 Października 2024