Instrukcja obsługi M-Audio BX4 BT

M-Audio Słuchawki BX4 BT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla M-Audio BX4 BT (28 stron) w kategorii Słuchawki. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/28
User Guide
English ( 2 – 6 )
Guía del usuario
Español ( 7 – 11 )
Guide d’utilisation
Français ( 12 – 16 )
Guida per l’uso
Italiano ( 17 – 21 )
Benutzerhandbuch
Deutsch ( 22 – 26 )
Appendix
English ( 27 )
2
User Guide ( )English
Introduction
Box Contents
BX4 BT Speakers (Stereo Pair)
Foam Feet
2-Prong IEC Power Cable
1/8” TS Speaker Interconnect Cable
1/8” to 1/8” TRS Aux Cable
1/8” TRS to RCA Cable
User Guide
Safety & Warranty Manual
Product Registration and Support
To download your included software, follow the instructions below:
1. Visit m-audio.com/softwaredownload.
2. Follow the on-screen instructions to register your product.
3. Upon successful registration, any applicable software downloads, product codes
and promotions will show in your account.
Note: A high-speed internet connection is recommended. If you need assistance, do not
return your product to the dealer. Instead, please contact our helpful technical support team
by visiting m-audio.com/support.
Setup
The configuration and placement of your BX4 BT monitors on speaker stands or your desktop
workstation may affect the performance of the speakers. Use the following tips to achieve the best
performance out of your BX4 BT monitors.
Tip: If possible, place your BX4 BT monitors on speaker stands instead of your desktop. Desks tend
to resonate sympathetically at low frequencies and may adversely affect the bass response of your
monitors. If speaker stands are not possible due to space restrictions and you notice a buildup in
bass, try placing the monitors on isolation pads to acoustically de-couple the monitors from the
desk.
Precautions
• Correct Power Operation: Since the BX4 BT contains amplifiers, it must be connected to a
power outlet. Before connecting power, please make sure that the Vol/Power knob is set to
the off position.
• Foam Feet: In order to maximize physical stability, we recommend you use the provided foam
feet on the bottoms of the BX4 BT monitors.
• Connecting to a Computer Sound Card or Other Audio Output Device: Your BX4 BT
speakers have a variety of inputs for use with a multitude of devices. Before connecting the
BX4 BT speakers, make sure the power from the computer or other output device has been
turned off and the BX4 BT speakers are also turned off. Connect the RCA or 1/4" (6.35 mm)
input jacks to the corresponding output connectors of a computer sound card, portable music
player, etc. You can also use the included 1/8" (3.5 mm) TRS stereo aux cable to connect a
secondary audio device to the Aux input on the front of the BX4 BT or connect via Bluetooth
®.
3
Speaker Placement
The placement of your speakers has a huge
impact on how well they will perform in your
studio. Although nearfield studio monitors are
designed to be more forgiving when it comes
to placement, you should do your best to
make sure they form an equilateral triangle
relative to your head. In other words, make
sure that each speaker is equally distant from
both your head as well as the other speaker.
Once each speaker has been placed, rotate
the speakers slightly so that the drivers are
pointing toward the listener.
Take a look at the diagram on the right.
Notice that the distance from the listener’s
head to each speaker is the same as the
distance between the left and right speakers.
Also note that the speakers are turned
slightly so that the drivers are facing the
listener. This is an ideal setup but if it is not
practical (or possible) to do this, try to match
this setup as closely as possible.
Speaker Height
The ideal height for BX4 BT is so that the
speaker is parallel to the ground and that the
midpoint of the woofer and tweeter is at ear-
height.
The diagram to the right demonstrates the
ideal placement height of the speakers
relative to the listener. Notice that the
listener’s ears are directly between the
woofer and tweeter.
Speaker Orientation
If possible, place the BX4 BT monitors in
their upright position and avoid laying the
speakers on their sides. The BX4 BT woofer
and tweeter are vertically aligned and will
provide the best performance when the
speakers are placed upright. Placing them on
their sides may create strong reflections from
nearby surfaces resulting in spectrally
unbalanced sound.
If your BX4 BT monitors must be oriented
horizontally due to space or line-of-sight
considerations, place the speakers so that
their tweeters are on the “inside” to improve
imaging.
The speakers and listener should
be at the three corners of a
triangle having equal length sides.
Listener
Left Speaker Right Speaker
Tweeter/Woofer midpoint

Specyfikacje produktu

Marka: M-Audio
Kategoria: Słuchawki
Model: BX4 BT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z M-Audio BX4 BT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Słuchawki M-Audio

M-Audio

M-Audio HDH40 Instrukcja

17 Września 2024
M-Audio

M-Audio BX Subwoofer Instrukcja

12 Września 2024
M-Audio

M-Audio AV32.1 Instrukcja

12 Września 2024
M-Audio

M-Audio AV42 Instrukcja

11 Września 2024
M-Audio

M-Audio BX3 BT Instrukcja

7 Września 2024
M-Audio

M-Audio BX4 BT Instrukcja

7 Września 2024

Instrukcje Słuchawki

Najnowsze instrukcje dla Słuchawki

Klipsch

Klipsch R6i Instrukcja

15 Października 2024
Vakoss

Vakoss MH954 Instrukcja

14 Października 2024
Skullcandy

Skullcandy Cassette Instrukcja

14 Października 2024
Jabra

Jabra Wave Corded Instrukcja

14 Października 2024
Manta

Manta MM65 Instrukcja

14 Października 2024
AKG

AKG Y600NC Instrukcja

14 Października 2024
Audio-Technica

Audio-Technica ATH-ANC29 Instrukcja

13 Października 2024
Daewoo

Daewoo AVS1421 Instrukcja

13 Października 2024
Vakoss

Vakoss MH942 Instrukcja

13 Października 2024
SuperTooth

SuperTooth Freedom Instrukcja

13 Października 2024