Instrukcja obsługi M-Audio BX3

M-Audio monitor BX3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla M-Audio BX3 (24 stron) w kategorii monitor. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/24
User Guide
English ( 2 – 5 )
Guía del usuario
Español ( 6 – 9 )
Guide d’utilisation
Français ( 10 – 13 )
Guida per l’uso
Italiano ( 14 – 17 )
Benutzerhandbuch
Deutsch ( 18 – 22)
Appendix
English ( 23 )
2
User Guide ( )English
Introduction
Box Contents
BX3 Speakers (Stereo Pair)
Foam Feet
2-Prong IEC Power Cable
1/8” TS Speaker Interconnect Cable
1/8” to 1/8” TRS Aux Cable
1/8” TRS to RCA Cable
User Guide
Safety & Warranty Manual
Product Registration and Support
To download your included software, follow the instructions below:
1. Vist m-audio.com/softwaredownload.
2. Follow the on-screen instructions to register your product.
3. Upon successful registration, any applicable software downloads, product codes
and promotions will show in your account.
Note: A high-speed internet connection is recommended. If you need assistance, do not
return your product to the dealer. Instead, please contact our helpful technical support team
by visiting m-audio.com/support.
Setup
The configuration and placement of your BX3 monitors on speaker stands or your desktop
workstation may affect the performance of the speakers. Use the following tips to achieve the best
performance out of your BX3 monitors.
Tip: If possible, place your BX3 monitors on speaker stands instead of your desktop. Desks tend to
resonate sympathetically at low frequencies and may adversely affect the bass response of your
monitors. If speaker stands are not possible due to space restrictions and you notice a buildup in
bass, try placing the monitors on isolation pads to acoustically de-couple the monitors from the
desk.
Precautions
• Correct Power Operation: Since the BX3 contains amplifiers, it must be connected to a power
outlet. Before connecting power, please make sure that the Vol/Power knob is set to the off
position.
• Foam Feet: In order to maximize physical stability, we recommend you use the provided foam
feet on the bottoms of the BX3 monitors.
• Connecting to a Computer Sound Card or Other Audio Output Device: Your BX3 speakers
have a variety of inputs for use with a multitude of devices. Before connecting the BX3
speakers, make sure the power from the computer or other output device has been turned off
and the BX3 speakers are also turned off. Connect the RCA or 1/4" (6.35 mm) input jacks to the
corresponding output connectors of a computer sound card, portable music player, etc. You
can also use the included 1/8" (3.5 mm) TRS stereo aux cable to connect a secondary audio
device to the Aux input on the front of the BX3.
3
Speaker Placement
The placement of your speakers has a huge
impact on how well they will perform in your
studio. Although nearfield studio monitors are
designed to be more forgiving when it comes
to placement, you should do your best to
make sure they form an equilateral triangle
relative to your head. In other words, make
sure that each speaker is equally distant from
both your head as well as the other speaker.
Once each speaker has been placed, rotate
the speakers slightly so that the drivers are
pointing toward the listener.
Take a look at the diagram on the right.
Notice that the distance from the listener’s
head to each speaker is the same as the
distance between the left and right speakers.
Also note that the speakers are turned
slightly so that the drivers are facing the
listener. This is an ideal setup but if it is not
practical (or possible) to do this, try to match
this setup as closely as possible.
Speaker Height
The ideal height for BX3 is so that the
speaker is parallel to the ground and that the
midpoint of the woofer and tweeter is at ear-
height.
The diagram to the right demonstrates the
ideal placement height of the speakers
relative to the listener. Notice that the
listener’s ears are directly between the
woofer and tweeter.
Speaker Orientation
If possible, place the BX3 monitors in their
upright position and avoid laying the speakers
on their sides. The BX3 woofer and tweeter
are vertically aligned and will provide the best
performance when the speakers are placed
upright. Placing them on their sides may
create strong reflections from nearby surfaces
resulting in spectrally unbalanced sound.
If your BX3 monitors must be oriented
horizontally due to space or line-of-sight
considerations, place the speakers so that
their tweeter is on the “inside” to improve
imaging.
The speakers and listener should
be at the three corners of a
triangle having equal length sides.
Listener
Left Speaker Right Speaker
Tweeter/Woofer midpoint

Specyfikacje produktu

Marka: M-Audio
Kategoria: monitor
Model: BX3

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z M-Audio BX3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje monitor M-Audio

M-Audio

M-Audio BX3 Instrukcja

14 Września 2024

Instrukcje monitor

Najnowsze instrukcje dla monitor

Acer

Acer EB321HQUDbmidphx Instrukcja

15 Października 2024
Bauhn

Bauhn APMTR-0624 Instrukcja

15 Października 2024
Acer

Acer KA270H Instrukcja

14 Października 2024
Acer

Acer K272HUL Dbmidpx Instrukcja

14 Października 2024
NEC

NEC E424 Instrukcja

14 Października 2024
LG

LG UltraGear 32GS85Q Instrukcja

14 Października 2024
LG

LG UltraGear 27GS85Q Instrukcja

14 Października 2024
Hannspree

Hannspree Hanns.G HP 225 PJB Instrukcja

13 Października 2024
Acer

Acer EK220QB Instrukcja

13 Października 2024
Acer

Acer S242HL Instrukcja

12 Października 2024