Instrukcja obsługi Luxman DA-150

Luxman Konwerter audio/wideo DA-150

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Luxman DA-150 (16 stron) w kategorii Konwerter audio/wideo. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

Owne sr`

Manual

USB D/A CONVERTER

DA-150

Contents

Precautions 1 ·············································································································

Features of This Unit 2 ································································································

Names and Functions 3 ······························································································

Connections 6 ············································································································

Operations 8 ···············································································································

Block Diagram 11 ·······································································································

Specifications 12 ········································································································

Before Asking for Repair Services 13 ··········································································

USB D/A CONVERTER DA-150

Precautions

Installation place

Install this unit in a location where good ventilation and heat

radiation are assured.

Especially, the installation of this unit where the direct sun-

light is present, where the temperature rises excessively

high such as close to a heater, or where it is humid or dusty

may cause a malfunction even if heat is efficiently released.

Therefore, do not install this unit in such places.

Note:

For heat dispersal, do not install this equipment in a con-

fined space such as a book case or similar unit.

* Note

Wall

* *

Turn off this unit when it is not used.

Depending on the condition of radio waves emitted during

television broadcasting, interference fringes may appear on

the television monitor, but that is not a malfunction. In such

a case, turn off the unit. There may also be a case where

noises are heard on the radio due to radio wave interfer-

ence.

Notice when handling optical digital cables

• Do not fold the cables. For storage, wind each cable to

make a coil whose diameter is approx.15 cm or larger.

• For connection, insert the cable connectors firmly into the

terminals of this unit and the other device.

• Use the cables whose each length is 3 m or less.

• When the cable connectors get dusty, wipe the dust

away with a dry soft cloth before inserting into the termi-

nals.

Cleaning

• Usually, wipe the unit with a dry soft cloth. When the dirt

is hard to remove, dip soft cloth in detergent diluted 5 or

6 times with water, wring it well, and remove contami-

nants. Then, remove the moisture with dry cloth.

• Do not use a solvent like alcohol, benzine, thinner, or

pesticide because such a substance can damage the ex-

terior. In addition, do not let this unit contact a rubber or

plastic form for a long time. That may damage the cabi-

net surface of the unit.

• -When using a chemical cloth for cleaning, read the cau

tion provided with the chemical cloth product.

• -Before cleaning, unplug the power cord from the AC out

let.

Precautions in connecting with other

components

When connecting this unit to input/output devices other

than a PC/Mac such as a CD player, an SACD player, a

DVD player, and a pre-main amplifier, be sure to turn off

the power of this unit and all other connected devices. Fail-

ure to observe this may generate a strong noise resulting in

speaker damage or cause a malfunction.

The pin-plug to be inserted in each input terminal of this

unit shall be pushed in firmly. If the grounding terminal is

inadequately connected, noises including hum may be gen-

erated, resulting in an adverse S/N ratio.

Protection circuit

This unit is equipped with a protection circuit that is activat-

ed upon the detection of overcurrent to protect the head-

phones. When the protection circuit is activated, the output

to the headphones is shut off and the operation indicator

blinks to show that this unit is in the muting state. When

the cause to activate the protection circuit is eliminated, the

blue operation indicator light comes back on and the op-

erating state resumes. If the protection circuit is frequently

activated, please consult your dealer.

Insertion and extraction of headphone plug

When the headphone (unbalanced) plug is inserted or ex-

tracted, a short circuit occurs between the L ch output and

R ch output because of the structure of the headphone jack

(unbalanced).

If the volume of this unit is turned up at this moment, an

overcurrent flows to the headphone amplifier output and the

overcurrent detection circuit becomes activated, which sets

this unit to the muting state and may also cause a malfunc-

tion. Therefore, the insertion and extraction of the head-

phone plug shall be performed when the volume is turned

down to the minimum or when there is no signal after shut-

ting off input signals.

Repair and adjustment

When repairs or adjustments are needed, please ask the

dealer where you bought the unit.

Specyfikacje produktu

Marka:	Luxman
Kategoria:	Konwerter audio/wideo
Model:	DA-150

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Luxman DA-150, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Konwerter audio/wideo Luxman

Luxman DA-150 Instrukcja

1 Stycznia 2025

Instrukcje Konwerter audio/wideo

Najnowsze instrukcje dla Konwerter audio/wideo

D-Link DMC-805X Instrukcja

7 Stycznia 2025

D-Link DIS‑M100G‑SW Instrukcja

5 Stycznia 2025

D-Link DMC-530SC Instrukcja

5 Stycznia 2025

Digitus DN-652101-1 Instrukcja

5 Stycznia 2025

Mean Well MHB75-48S24 Instrukcja

3 Stycznia 2025

Mean Well MHB75-48S05 Instrukcja

3 Stycznia 2025

Mean Well NSD05-48S15 Instrukcja

3 Stycznia 2025

Mean Well MHB100-48S24 Instrukcja

3 Stycznia 2025

Mean Well MHB150-48S05 Instrukcja

3 Stycznia 2025

Mean Well LDH-45B-700 Instrukcja

3 Stycznia 2025