Instrukcja obsługi Lumens OIP-AC01


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Lumens OIP-AC01 (2 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
www.MyLumens.com
Copyright © 2021 Lumens Digital Optics Inc. All rights reserved.
5100462- SEP. 2021 50
OIP-AC01 Quick Installation Guide
1. PACKAGE CONTENTS
6U Rack Chassis
Installation Guide
Power Adapter
Power Connector
M5 Screw p1-x8
Cable Clip p1-x5
(Appearance may vary
depending on country/region
2. Power & System Requirements
Power Requirement: DC 12V, 3A power supply for the cooling fan system.
System Requirement:
The 6U rack chassis requires a minimum of 266.7mm (10.5in) contiguous
free space in the rack for mounting.
With the Cooling Fan System installed, an additional 1U space above the
chassis should be left empty to provide space for air to ow freely.
3. Installation Instructions
STEP 1
Install the OIP-AC01 to the rack with M5 Screws*8pcs.
STEP 2
Unscrew the 3 thumbscrews holding the top locking panel in place, and remove
the panel from the front of the chassis. Unscrew the 3 thumbscrews holding the
bottom locking panel in place, and remove the panel from the front of the
chassis.
Note: The thumbscrews are connected to the locking panels with a retention mechanism
and will not come completely free when they have been unscrewed from the chassis.
www.MyLumens.com
Copyright © 2021 Lumens Digital Optics Inc. All rights reserved.
STEP 3
Align and then carefully slide a full or half-length compatible audio/video unit into
the top/bottom grooves of a free slot. Half-length units are designed with a notch
to prevent them from sliding all the way to the back of the rack chassis. Repeat
this step until all units have been installed.
Note: If fewer than 15 units are being mounted it is strongly suggested to leave empty
space between units that get particularly warm to improve airow dissipation.and heat
STEP 4
Reattach the top and bottom locking panels by screwing in the 3 thumbscrews on each
until they are tight and . secure
Note: Be careful to not overtighten the thumbscrews as this could damage the screw
threads.
STEP 5
Connect DC 12V, 3A supply to the cooling fan system power


Specyfikacje produktu

Marka: Lumens
Kategoria: Nie skategoryzowane
Model: OIP-AC01

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Lumens OIP-AC01, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Nie skategoryzowane Lumens

Instrukcje Nie skategoryzowane

Najnowsze instrukcje dla Nie skategoryzowane