Instrukcja obsługi Lowrance SonarHub

Lowrance system hi-fi SonarHub

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Lowrance SonarHub (4 stron) w kategorii system hi-fi. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
| 1
Guide | SonarHub
SonarHub guide
SonarHub
You can use the SonarHub to view data from CHIRP, single
frequency and StuctureScan HD transducers.
¼Note: When a CHIRP transducer is in use, you will not be able to
view returns from single frequency sonar or StructureScan HD. You
can view CHIRP and StructureScan HD at the same time by using
two SonarHubs or by connecting your StructureScan HD transducer
directly to your HDS Gen2 Touch display unit or to the LSS-1 or LSS-2
attached to your HDS Gen2 display unit.
CHIRP
A CHIRP (Compressed High Intensity Radar Pulse) transducer sends
out an elongated pulse that broadcasts all frequencies within the
bandwidth of the selected transducer type (Low CHIRP, Medium
CHIRP, High CHIRP). This results in greater depth penetration, better
target separation and enhanced image quality.
¼Note: Your CHIRP transducer will only support one of the
frequencies listed below (Low, Medium or High).
CHIRP frequencies
Low CHIRP Provides the best depth penetration with lower
resolution images
Medium CHIRP Better depth penetration than High CHIRP, but
with minimal loss of target definition
High CHIRP Offers high resolution images in shallow water
2 | Guide | SonarHub
Single frequency transducers
Provides a traditional sonar view of the area under and around your
boat, allowing you to detect fish and examine bottom structure.
Single sonar frequencies
50kHz Lower resolution; best performance in deep water
83kHz Wider cone angle provides greater water coverage
200kHz High resolution; highest sensitivity and better target
separation in shallow water
StructureScan HD transducers
StructureScan HD uses high frequencies to provide a high-
resolution, picture-like image of the bottom.
StructureScan Frequencies
455kHz Excellent resolution and greater range than 800kHz
800kHz Better definition than 455kHz at shallower depths
Selecting a frequency
You can view CHIRP, single frequency sonar or StructureScan sonar
data by selecting the desired frequency from the transducer type
dropdown menu.
Refer to your unit’s operation manual for instructions on selecting a
transducer type.
| 3
Guide | SonarHub
Updating software
To take advantage of SonarHub features, you may need to update
the software on your display unit.
For Lowrance:
http://www.lowrance.com/en-US/Software-Updates/
For Simrad:
http://www.simrad-yachting.com/en-US/Support/Downloads/
Compliance Statements
The SonarHub comply with the following regulations:
• CE under EMC directive 2004/108/EC
• Level 2 devices of the Radio communications (Electromagnetic
Compatibility) standard 2008
The relevant Declaration of Conformity is available in the following
websites under model documentation section:
www.simrad-yachting.com, www.lowrance.com

Specyfikacje produktu

Marka: Lowrance
Kategoria: system hi-fi
Model: SonarHub

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Lowrance SonarHub, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje system hi-fi Lowrance

Lowrance

Lowrance SonarHub Instrukcja

7 Września 2024
Lowrance

Lowrance SonicHub Marine Instrukcja

14 Maja 2024

Instrukcje system hi-fi

Najnowsze instrukcje dla system hi-fi

Philips

Philips TAM3205M2 Instrukcja

14 Stycznia 2025
Philips

Philips TAM3505M2 Instrukcja

14 Stycznia 2025
OSD Audio

OSD Audio Nero Stream ARC Instrukcja

14 Stycznia 2025
Morel

Morel SUB-8X Instrukcja

14 Stycznia 2025
Morel

Morel BEAT-X Instrukcja

14 Stycznia 2025
Morel

Morel Sopran 634 Instrukcja

14 Stycznia 2025
Klipsch

Klipsch HD Theater 500 Instrukcja

14 Stycznia 2025
Lenco

Lenco MC-129 MP3 Instrukcja

13 Stycznia 2025
Terratec

Terratec HA-1 Charge Instrukcja

13 Stycznia 2025
Thomson

Thomson MIC400BT Instrukcja

12 Stycznia 2025