Instrukcja obsługi Lowrance DrivePilot Hydraulic-Steer Pack

Lowrance nieskategoryzowany DrivePilot Hydraulic-Steer Pack

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Lowrance DrivePilot Hydraulic-Steer Pack (16 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 27 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/16
AUTOPILOT
BUYERS GUIDE
THE AUTOPILOT ADVANTAGE
SIMRAD AT THE HELM
THE CONTINUUM ADVANTAGE
Whether you have already enjoyed it, or are yet to experience
the freedom of a really good autopilot, you will see that
Simrad autopilots reduce your workload and fatigue, improve
your situational awareness and safety, helping you arrive
fresher at your destination.
Simply put, an autopilot will lock a pre-set course in
its memory and keep you on course by making small
adjustments to the helm for you. Simrad’s autopilot systems
give you reliable and accurate control over your heading
without years of experience at the helm saving you time
and fuel by making ecient turns, and keeping you closer to
your planned course.
Compensating for wind and tide, a Simrad autopilot frees you
from constant course corrections when you’re busy trawling
for game fish, planning your next destination, or just cruising.
Set waypoints simply by tapping where you want to go on-
screen, and your autopilot will take you there.
Need to navigate around an unexpected obstruction? Dodge
functionality lets you do so without disengaging the autopilot.
Once you’ve avoided the obstacle, your Simrad autopilot will
bring you back on your original course.
An autopilot is one of the most satisfying upgrades you can
add to any boatan advantage you can’t aord to be without.
The current range of Simrad autopilots represent over 60
years of experience and development. The Simrad AP1 was
the world’s first auto-steering system, and has been winning
awards for our auto-steering technology ever since.
We have a wide range of solutions to suit any vessel type and
length. Design your own system one component at a time, or
start by choosing one of our autopilot core packs.
With our modular components, you can build an autopilot system in just a few steps:
1. Select a drive unit compatible with your boat’s steering system.
2. Choose a rudder feedback unit, or utilise our Virtual Rudder Feedback.
3. Select the autopilot computer that matches your drive unit.
4. Choose how you want to control your autopilot system select a dedicated controller or a Simrad multifunction display
with full autopilot integration.
Alternatively, start with a pack of core components that we have put together, and simply add a drive unit that suits your
vessel and then customise your system with a controller of your choice.
Steering your boat isn’t just mechanical your
piloting skill is a product of your own unique
experience on the water. When it comes to our
autopilot systems, the skill to make smart steering decisions
comes from the Simrad Continuum algorithm.
The software that drives our autopilots is the product of
decades of development, distilling countless hours of real-
world on-water experience into a system you can trust to
take the helm.
BUILDING A SYSTEM:
THE MAIN COMPONENTS
There are a number of components that make up an autopilot
system, but if you approach it in the right order, it’s straight
forward. A lot of the choices are made for you based on
the type of steering system you have on your boat. Start by
understanding what type of steering you have, then work
through the drive selection process, this will in turn select
the right computer for you and help you understand if you
need a rudder feedback unit, then you can you can select the
controller and any additional accessories you may need.
An autopilot drive unit translates instructions from your
autopilot system into movements of your rudder or outboard.
The drive unit you’ll need depends on the type of steering
system you have and the size of your boat. Is your steering
system hydraulic or mechanical?
An autopilot computer is the brains of your Simrad
Continuum autopilot system. It continuously monitors data
from compasses, rudder feedback units and other on-board
instruments, and steers to your chosen heading or course.
An autopilot computer also includes the electronics required
to operate your drive unit.
A compass is always required plus you can add additional
components like remotes forexibility, convenience and
accessibility.
Controllers provide a status display and a hands-on interface
to your autopilot system, allowing you to set a course or
use more advanced auto-steering features. Choose from a
dedicated controller or control your autopilot system using a
Simrad multifunction display.
Contact your local authorised Simrad autopilot dealer/
installer to help confirm you have the best system for your
vessel and to professionally install it for optimum results and
warranty cover.
Rudder feedback units are small sensors that measure and
report rudder position, enabling precise rudder control for
smooth and accurate steering. On smaller boats, Virtual
Rudder Feedback (VRF) eliminates the need to install a
physical sensor by using a software-based approach to
calculate rudder position.
1. Drive Unit
3. Autopilot Computer
5. Additional Components
2. Rudder Feedback Units
4. Autopilot Controllers
6. Find an Authorised Dealer/
Installer


Specyfikacje produktu

Marka: Lowrance
Kategoria: nieskategoryzowany
Model: DrivePilot Hydraulic-Steer Pack

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Lowrance DrivePilot Hydraulic-Steer Pack, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Lowrance

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Meec Tools

Meec Tools 010-084 Instrukcja

6 Października 2024
Outwell

Outwell Scenic Road 250 Instrukcja

5 Października 2024
Impact

Impact QuikBalance Instrukcja

4 Października 2024
Impact

Impact CA-112 Instrukcja

4 Października 2024
Impact

Impact LS-BHA Instrukcja

4 Października 2024
Impact

Impact LKB-5C Instrukcja

4 Października 2024
Impact

Impact RST-001 Instrukcja

4 Października 2024