Instrukcja obsługi Logik L16BSS10

Logik mikser L16BSS10

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Logik L16BSS10 (4 stron) w kategorii mikser. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
DGS Retail Ltd • Maylands Avenue • Hemel Hempstead •
Herts • HP2 7TG • England
Visit Partmaster.co.uk today for the easiest way
to buy electrical spares and accessories. With
over 1 million spares and accessories available
we can deliver direct to your door the very next
day. Visit www.partmaster.co.uk or call 0870 6001 338 (UK customers only) Calls
charged at National Rate.
This symbol on the product or in the instructions means that your
electrical and electronic equipment should be disposed at the end of its
life separately from your household waste. There are separate collection
systems for recycling in the EU. For more information, please contact the
local authority or your retailer where you purchased the product.
GB-4 GB-5
SAFETY FIRST!
Please follow all the safety precautions listed below for safety and to reduce the risk
of injury or electrical shock.
• Read all the instructions carefully before using your appliance and keep them for
future reference.
• Unplug the appliance from the mains supply when not in use, when removing or
attaching the blender jug, or before cleaning any part of the appliance.
This appliance is for household use only. Do not use it for professional catering.
• Do not use the appliance outdoors.
• Do not immerse the appliance base unit or the mains cable or plug in liquids.
• Do not use the appliance near a source of heat or on an unstable surface.
• Do not use your appliance in damp or wet conditions.
• Never let children operate this appliance. Close supervision is necessary when this
appliance is used near children.
This appliance is not intended for use by persons (including children) with reduced
sensory or mental capabilities, or lack of experience and knowledge unless they
have been given supervision or instruction concerning the use of the appliance by
a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Ensure that the mains cable does not touch any hot surface and that it does not
overhang the edge of your work surface.
There are no user serviceable parts in your appliance.
• Do not operate the appliance with a damaged mains cable or mains plug or after
the appliance or any attachment has been damaged. Seek qualied technicians for
assistance.
• If the mains cable is damaged it must be replaced by the manufacturer, its service
agent, or similarly qualied persons in order to avoid a hazard.
• Do not use attachments or accessories which are not recommended by the
manufacturer. They may cause malfunction or injury.
• Store the appliance away from direct sunlight and out of the reach of children.
When operating your blender:
• Do not place your hand in the blender jug. The sharp blade may cause injury.
• Never insert any hard object or implement into the blender jug when it is
operating. This may cause damage to the appliance and personal injury.
• Do not place meat containing bones or fruits with large hard stones in the blender
jug.
• If the blender becomes clogged, switch off and unplug the mains cable from the
mains socket before cleaning the obstruction. Check carefully for damage.
• Do not use the appliance for any purpose not expressly specied in this manual.
STORAGE
After all the components have been washed and dried, re-assemble the blender and
store it out of direct sunlight and out of the reach of children.
The cable may be wound around the lugs at the bottom of the appliance for easier
storage.
SPECIFICATIONS
Power : 230V~50Hz, 500W
Capacity of Jug : 1.6 litres max.
Duty Cycle : 3 minutes ON; 5 minutes OFF
We continually strive to improve our products, specications may change without
prior notice.
CLEANING
Cleaning the blender jug:
1. Pour about 500ml of warm soapy water into the jug and place the jug on the base.
2. Turn and hold the Speed Selector to ‘P for a few seconds to loosen any food
particles and free them from the blades.
• Remove the jug, pour away the water and rinse in fresh running water. Repeat 1
and 2 with fresh water.
• Alternatively the jug may be immersed in warm soapy water and cleaned using a
long handled brush. Do not touch the blades when cleaning.
Wash the lid and stopper separately in warm soapy water, rinse and allow to dry.
The jug body should be handled carefully. The jug contains moving CAUTION:
parts - do not leave the jug immersed in water for any longer than necessary to
clean it or you may affect the operating performance of the blender.
• DO NOT wash the jug or attachments in a dishwasher.
Cleaning the base:
• Ensure the blender is switched off and unplugged from the mains.
Wipe the outer surface of the motor unit with a damp cloth. Never use abrasive
cleaners or scouring creams.
Stainless Steel
Blender
Instruction Manual
L16BSS10
Congratulations on the purchase of your new Logik Blender.
We recommend that you spend some time reading this instruction
manual in order to fully understand all the operational features it
offers.
Read all the safety instructions carefully before use and keep this
instruction manual for future reference.
Never immerse the base in water when cleaning.
NOTE: Do not run the appliance continuously for more than 3 minutes. After a full 3
minute cycle allow the blender to rest for another 5 minutes before using it
again.
During blending, you can feed in small amounts of food or liquid through the jug lid.
To do this:
Hold the lid.
Turn the stopper slowly anti-clockwise to free it and then lift it out.
Gradually feed pieces of food or liquids into the jug through the feeder.
Fit the stopper back when you have nished.
Base Unit
Stopper/Measuring Cup
Handle
Blade Assembly
5
6
7
8
Safety Lid
Measuring Scale
Blender Jug
Speed Selector
1
2
3
4
GB-1 GB-2 GB-3
UNPACKING
Remove all packaging from the blender. Retain the packaging. If you dispose of it
please do so according to any local regulations.
The following items are included:
The Main Unit
The Blender Jug (P.N.: XB9196-5-15)
The Blender Jug Cover (P.N.: XB9196-2)
• Stopper / Measuring Cup (P.N.: XB9196-1)
• Instruction Manual (P.N.: L16BSS10-A)
If items are missing or damaged, please contact Partmaster (UK only).
Tel: 0870 6001 338 for assistance.
FIRST TIME USE
• Before using your blender for the rst time, wash the jug, blade assembly, lid and
stopper. Rinse throughly and dry.
Place the base unit on a stable surface, free from heat and moisture and within
easy reach of a mains socket. The mains cable should not be taut.
PRODUCT OVERVIEW
PREPARING AND FILLING THE INGREDIENTS
• Cut the ingredients into 25mm (1”) cubes before placing them into the blender jug. If
the food is very solid or dry, cut the pieces into smaller cubes.
Fill the blender jug with the ingredients.
Do not overll the jug. The maximum capacity is 1600 ml, but we suggest you do not
exceed 1250 ml. If you are preparing a large quantity use several smaller batches.
If the ingredients are very dry, put some liquid into the jug. You should never try to
reduce dry ingredients in the blender.
FITTING THE STOPPER
The stopper has an integral measuring cup useful for measuring small amounts of
ingredients.
• Place the stopper in the slots in the lid and turn clockwise to lock. If the stopper is
properly secured, you will hear a click sound.
To avoid splashing, always operate the blender with the stopper rmly in place.
FITTING THE LID
Place the lid on the top of the jug and turn the lid clockwise. If the lid is properly
secured, you will hear a click” sound.
OPERATION
Make sure the jug and the lid are secure and in the LOCK position.
Set the selector switch to ‘0’.
Plug your blender into the mains and switch on the power.
Blender's Operation Modes
Select the desired operating speed. There are 5
speeds. Move the Speed Selector progressively to
the right to increase the speed. When you start
blending use a low speed to begin with and
gradually increase the speed if necessary.
To stop the operation, turn the Speed Selector
back to ‘0’.
Use this mode when ingredients need to be
blended in small repeated bursts.
Turn the Speed Selector to ‘P’ and hold it there for
a short period of time.
To stop the operation, release the Speed Selector
which will then automatically return to ‘0’.
Continuous (Normal)
operation
Pulsed operation
AFTER USE
After you have nished blending:
Set the Speed Selector to ‘0’.
Hold the jug by the handle and carefully turn it clockwise (towards you) to release
the jug. (This may be easier with one hand on the base and one hand holding the
jug handle).
To pour out the contents, rotate the lid of the jug anticlockwise to free it and then
lift o the lid. Pour or spoon the contents out carefully.
Unplug the blender from the mains socket.
FITTING THE JUG TO THE BASE UNIT
Place the jug on the blade assembly as show. The jug
will t only one way round. If the jug is not properly
tted to the base the blender will not start.
1
6
7
8
2
3
4
5
Do not run the appliance continuously for more than 3 minutes. After a full
3 minute cycle allow the blender to rest for another 5 minutes before using
it again.
Never blend very hot liquids in the blender. This is dangerous as the
contents may erupt.
If you spill liquid on the blender base immediately switch o and wipe dry.
The lid must be secured to the jug and the jug
to the base otherwise the blender will not
operate!


Specyfikacje produktu

Marka: Logik
Kategoria: mikser
Model: L16BSS10

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Logik L16BSS10, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje mikser Logik

Logik

Logik L16BSS10 Instrukcja

24 Sierpnia 2024
Logik

Logik L600BK17E Instrukcja

24 Sierpnia 2024
Logik

Logik L15BSS13 Instrukcja

24 Sierpnia 2024
Logik

Logik L100BW16E Instrukcja

24 Sierpnia 2024
Logik

Logik L100BR16E Instrukcja

24 Sierpnia 2024

Instrukcje mikser

Najnowsze instrukcje dla mikser