Instrukcja obsługi Loewe Individual TV

Loewe Niesklasyfikowane Individual TV

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Loewe Individual TV (166 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/166

➠
D

DR+
M
R
+
-

DR+
M
R
+
-
ט ט
ט ט
ט
17 -
english
Operating convenience
The index in the TV set
The index explains the TV functions and the terms that you may be con-
fronted with when operating the TV set. You can start all the assistants
and many of the operating functions directly from here.
Alphabetic sorting is preceded by the items Menu language, Energy ef-
ficiency Integrated features Repeat initial installation, and .
Call index
MEDIA: MediaPortalCall .
Select ,Index
OK call.
You will see an info text for the highlighted keyword in
the info display.
If an OK symbol appears in the marked line, this function
can be called directly with .OK
Selecting a keyword
Enter initial letters with the like with a numeric buttons
mobile phone keypad (see page 14).
or go with:
to the preceding / next letters,
from line to line,
P+/P– Flip forwards or backwards through the pages.
Example: You want to have the TV set switch off automatically at
a specific time:
Select the keyword Switch off ט Automatic, with OK you can
activate the setting and with back again.
The info display
The info display provides an info text appropriate to the on-screen display
that can assist you further with the operation of your TV set. Together
with the index it makes for a comfortable operating system.
➠ An on-screen display is faded in.
The factory setting is that the info display is shown auto-
matically for each menu item. In this case you can tempo-
rarily hide the info texts with the INFO button.
The automatic info display can be hidden via a menu
setting. Then it can be displayed temporarily by pressing
the .INFO button
You will also be able to see that there is an info-text avail-
able from the displayed symbol at the bottom right.INFO
If an info text over several pages is available the number
of available pages and is displayed in the P+P– Page 
Info window. You can scroll through the individual info
pages with and .P+ P–
Permanently display or hide the automatic info display
Once you have become familiar with how to operate the TV set, you can
switch off the automatic info display.
➠ In normal TV mode, without other displays.
MENU: TV menu Call .
 Select Settings,
go to the menu line below.
 Select Miscellaneous,
go to the menu line below.
 Select On-screen displays,
go to the menu line below.
 Select Automatic info,
go to the menu line below: . yes / no
OK
a z
-
OK
P+
P–
Activate Previous/next letter
6HOHFWOHWWHU           3DJH
INDEX
Menu language
Energy efficiency
Integrated features
Repeat initial installation
*
Access code
Automatic dimming - Room
Automatic station programming
You can select your language for operating the TV set.
Picture Sound Recording
SETTINGS
Here, you can search for stations automatically or manually as well as set
the menu language, timer functions, parental lock,
on-screen displays, etc.
TV MENU
Settings
Station ...
ions
19 -
english
Operating convenience
Radio menu – Overview diagram
Other menus– Overview diagram
Radio menu
Sound Stations Timer functions
Search wizard
Manual adjustment
Change stations
Select/change favourites
Switch off once
Switch off daily
One-time alarm
Wake up Mon-Fri
Wake up Sat
Wake up Sun
Wake up with
Wake up signal volume
EPG menu Teletext menu
Preview pages
Sub-title pages
Personal text pages
Character set
Station selection
Newsflash
Reveal
Recording wizard
Settings
Sound mode
Dolby PLII mode
(1
Sound adjustment
Headphone volume
Loudness
more...
Auto volume
Maximum volume
Max. switch on volume
Volume adjustment for
current station
Balance
Auto speech detection
Media menu
Switch on TV when marked
off
on
Station selection
Data capture
no
yes
Sorting
corresponding to station list
chronologically
Photo settings
Music settings
Video settings
Network access
Other
Reset to factory settings
Network settings
21 -
english
Connecting the TV set to the home network
You can connect your TV set to the home network by a wired connection
(Ethernet, Powerline) or by a wireless radio connection (WLAN). Please
contact your specialist dealer for more information on Powerline.
For the network adapter configuration, see page 71.
➠
Under no circumstances may the TV set be wired and at the same time
connected by a to the same network, e.g. router. wireless connection
This may cause severe operational faults.
Example for a wired connection
Connect the LAN socket of your TV set to the LAN switch/router of your
home network with a network cable (available from your dealer).
Example for a wireless connection
You can connect the TV set to your home network by a wireless radio
connection via the WLAN antenna inside the set.
Connecting speakers
The TV set (exception Individual 32) is delivered ex-factory without speak-
ers. Various options are available for connecting speakers to your set.
As an accessory you can obtain a Loewe system speaker Stereospeaker I
Sound for certain set sizes (1 which can be fitted underneath the set and
connected to the System speaker connection. See the assembly instruc-
tions for the Loewe system speaker for further information.
If you want to use other speakers, two speakers can be connected to the
speaker connections (screw terminals) of the TV set (2 (min. 4 Ohm / min.
20W Sinus).
Speaker systems or active speakers can be connected to the AUDIO LINK
connection.
How to configure and connect speaker systems or active speakers is
described from page 123.
Connecting external speakers to the screw terminals (2
To connect the speakers, switch the TV set off with the mains switch and
pull out the mains plug.
The bridge plug on the system speaker connection must be plugged or
remain plugged.
You have connected and laid the connecting cables at the speakers.
Turn the 4 screw terminals anticlockwise about 2 or 3 turns. The con-
nection openings for the speaker connecting cables are laid free.
Make sure that no open cable ends get inside the set when connecting.
Avoid short-circuiting between the individual screw terminals.
Push the connecting cables (max. 1.5mm 2) of the speakers under the
same coloured screw terminal (red to red, black to black). Also note the
connection labels of the speakers Right and Left and the symbols “+”
equals red and “–” equals black (see figure).
Make sure that the sheaths of the connecting cables are not acciden-
tally pinched.
Tighten the screw terminals in clockwise direction.
Initial installation
LAN switch/router
Homeserver,
e.g. PC
TV set
Wi-Fi router
Homeserver,
e.g. PC
TV set
(1 Equipment and upgrade options, see page 150.
(2 not possible for Individual 32.
23 -
english
Turning the set on/off
Switching the TV set to standby mode
Press the mains switch on the bottom of the set.
The display in the control panel on the front lights up first orange and
then red. The set is now in standby mode.
Individual 55 / 46 / 40
Individual 32
Switching the TV on/off on the control unit
To switch the TV set into Operating mode or switch it off into Standby
mode, press the middle of the On/Off button for about 2 seconds.
Meaning of the display colour of the LEDs in the On/Off
button:
Red: Standby mode
Green: TV set is switched on
Orange: Radio mode, the device receives EPG data, timer
recording is active.
Switching the set on with the remote control
Press the on/off button
or
numeric buttons
or
TV button
or
OK button – station list is called
or
MEDIA button MediaPortal – is called.
Switching the set off with the remote control
Press the .on/off button
➠ Before switching off the set with the mains switch, we
recommend you to switch it to standby mode.
Switch on in Radio mode
Press on the TV control unit. R
or:
Press the on the remote controlAUDIO button
(radio mode, see page 60).
Display
Initial installation
Mains switchControl unit
M
R
+
-
M
R
+
-
Mains switch
Control unit
25 -
english
Select antenna cable.
Yellow button: Connect/disconnect antenna cable.
Antenna/cable (analogue):
analogue stations via
cable/antenna
DVB-T: digital terrestrial stations
DVB-C: digital stations via cable
DVB-S (cable 1): digital stations via satellite
DVB-S (cable 2): digital stations via satellite
The selection options for the aerials depend on the
receiver units installed or upgraded at the factory (see
also page 150).
Depending on which antenna(s) was (were) selected, the
appropriate settings are called later during the routine.
.OK Proceed
 Select desired languages and alternative
languages for subtitles and audio for DVB
programmes (see page 65).
Set up audio commentary for the visually
impaired (see page 47).
.OK Proceed
Depending on which antennas (DVB-T, DVB-C, DVB-S)
were selected, the appropriate settings appear
below.
Selecting
antennas
Subtitle and
audio
languages
(DVB)
OK
INITIAL INSTALLATION
Connect antenna cable(s)
Antenna cable(s) for: to antenna socket(s):
Antenna/cable (analogue) ANT TV
DVB-T ANT TV
DVB-C ANT TV
DVB-S (cable 1) ANT SAT
DVB-S (cable 2) ANT SAT2
Proceed Connect/disconnect
Back
Network
selection
Settings
Encrypted
stations
Search
method
Supply voltage
Setting options for DVB-T reception:
If you have not selected a DVB-T antenna in the antenna selection: Con-
tinue with on page 26.setting options for DVB-C reception
If several networks are available over DVB-T, you can
decide which network you want to receive your channels
from.
 Select network,
.OK Proceed
 Select and adapt settings for DVB-T reception.
You can state whether coded stations are to be searched
for in the search/update. Select yes to save all found
scrambled stations. However, these stations can only
be received in connection with a CA module and the
appropriate Smart Card. Handling of the CA module is
described on page 67.
If a CA module with a SmartCard is already plugged in for
the station search, all the stations which this module can
descramble are also saved when is preset.no
If you want to run the station search independently of
the channel grid, select for the search frequency search
method.
.OK Proceed
 Select supply voltage / . no yes
Use a DVB-T antenna that requires a supply voltage
(active antenna) and which is not already supplied
via a power adapter, then select yes (5V) for the
antenna’s power supply.
How to align your DVB-T antenna is described on
page 35.
.OK Proceed
OK
INITIAL INSTALLATION
Subtitle and audio languages (DVB)
Favoured subtitle language English ...
Alternative subtitle language German
Favoured audio language English
Alternative audio language German
Audio commentary off
Proceed Back
OK
Initial installation
OK
INITIAL INSTALLATION (DVB-T)
Scrambled stations no yes
Search method Channel search
Proceed
OK
yes (5V)
INITIAL INSTALLATION (DVB-T)
Antenna
Supply voltage
no (0V)
Proceed Back
OK
27 -
english
Setting options for the satellite system (2 satellites on 22 kHz switchbox
/ 2 satellites on toneburst switch):
 Select Satellite 1 Satellite 2 / ,
 select satellites from list,
.OK Proceed
 Select network.
If several networks are available over DVB-S, you
can decide which network you want to receive your
channels from.
.OK Proceed
 Set LNB frequencies.
Normally, you do not need to change the values for
high and low band, unless the LNC (LNB) of your
satellite system uses a different oscillator frequency
(important for the frequency display).
.OK Proceed
(with Setting options for DVB-S reception (continued)
on page 31).
Setting options for the satellite system (single satellite):
 Select satellite,
.OK Proceed
 Select network.
If several networks are available over DVB-S, you
can decide which network you want to receive your
channels from.
.OK Proceed
 High band no / yes.
Specify here whether the high band of the selected
satellite is to be searched in addition to the low
band.
.OK Proceed
 Set LNB frequencies.
Normally, you do not need to change the values for
high and low band, unless the LNC (LNB) of your
satellite system uses a different oscillator frequency
(important for the frequency display).
.OK Proceed
(with Setting options for DVB-S reception (continued)
on page 31).
Select single
satellite
Network
selection
High band
LNB
frequencies
Satellite
selection
Network
selection
LNB
frequencies
(22 kHz
switchbox)
LNB
frequencies
(toneburst
switch)
Initial installation
OK Proceed Back
INITIAL INSTALLATION (DVB-S)
LNB frequencies
Low band 9750 MHz
High band 10600 MHz
OK
OK
INITIAL INSTALLATION (DVB-S)
Select single satellite
Astra1 19,2°E Hellas Sat2 39°E
Hot Bird 13°E Hispasat 30°W
Astra2 28,2°E Intelsat10 02 1°W
Astra3 23,5°E Intelsat901 18°W
Atlantic Bird1 12,5 °W Nilesat 7°W
Atlantic Bird2 8°W Pan Am Sat 43°W
Atlantic Bird3 5°W Sirius2/3 5°E
Eurobird1 28,5°E
Telekom2C 5°W
Eurobird 9A 9°E
Telekom2D 8°W
Eutelsat W2 16°E Telestar12 12,5°W
Eutelsat W3A 7°E Thor2/3 0,8°W
Eutelsat W4 36°E Türksat 42°E
Proceed
OK
no
INITIAL INSTALLATION (DVB-S)
High band
yes (with 0/22 kHz)
Proceed Back
OK
OK
INITIAL INSTALLATION (DVB-S)
Satellite selection
Satellite 1 Astra1 19,2°E ...
Satellite 2 Hot Bird 13°E
Proceed Back
OK
INITIAL INSTALLATION (DVB-S)
LNB frequencies
ASTRA1 19,2°E 9750 MHz
Hot Bird 13°E 9750 MHz
Proceed Back
OK
INITIAL INSTALLATION (DVB-S)
LNB frequencies
ASTRA1 19,2°E Low band 9750 MHz
ASTRA1 19,2°E High band 10600 MHz
Hot Bird 13°E Low band 9750 MHz
Hot Bird 13°E High band 10600 MHz
Proceed Back
OK Proceed Back
INITIAL INSTALLATION
Network selection
other network
CanalDigitaal
OK
OK Proceed Back
INITIAL INSTALLATION
Network selection
other network
CanalDigitaal
OK

Specyfikacje produktu

Marka: Loewe
Kategoria: Niesklasyfikowane
Model: Individual TV

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Loewe Individual TV, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Loewe

Loewe

Loewe Control Interface Instrukcja

5 Września 2024
Loewe

Loewe MediaVision 3D Instrukcja

3 Września 2024
Loewe

Loewe Subwoofer 800 Instrukcja

1 Września 2024
Loewe

Loewe We. HEAR 2 Instrukcja

31 Sierpnia 2024
Loewe

Loewe Klang m1 Instrukcja

31 Sierpnia 2024
Loewe

Loewe Individual TV Instrukcja

26 Sierpnia 2024
Loewe

Loewe Sound Projector ID Instrukcja

23 Sierpnia 2024
Loewe

Loewe Feature Upgrade Instrukcja

22 Sierpnia 2024
Loewe

Loewe BluTech Vision 3D Instrukcja

22 Sierpnia 2024
Loewe

Loewe SoundPort Instrukcja

21 Sierpnia 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
Rock N Roller

Rock N Roller R14G Instrukcja

29 Stycznia 2025
Rock N Roller

Rock N Roller R6RT Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
Shimbol

Shimbol Memory I PRO Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025