Instrukcja obsługi LinksPoint LP01632

LinksPoint odbiornik LP01632

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla LinksPoint LP01632 (24 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/24
LinksPoint
LinksPoint LinksPoint
LinksPoint User
User User
User Guide
GuideGuide
Guide
Serial GPS Receiver for
Symbol Mobile Computers
Part Number: LP11631 (Externally powered version for MC90XX and MC70)2006FOR FINAL REVIEW -
NOT FOR RELEASE
Part Number: LP11632 (Cradle powered version for MC70 cradle with power out)
One Selleck Street Phone 203.853.4600
Suite 330 Fax 203.838.0688
Norwalk, CT 06855 Latitude: 41.10705
www.linkspoint.com Longitude: -73.40905
DRAFT 3 – JANUARY 10, 2005 NOT FOR RELEASE
LINKSPOINT USER GUIDE LINKSPOINT SERIAL GPS FOR SYMBOL
1
© 2006 Links Point, Inc. All rights reserved.
No part of this publication may be reproduced or used in any form, or by any electrical or
mechanical means, without permission in writing from Links Point, Inc. (LinksPoint). This
includes electronic or mechanical means, such as photocopying, recording, or information
storage and retrieval systems. The material in this manual is subject to change without
notice.
The software is provided strictly on an “as is” basis. All software, including rmware,
furnished to the user is on a licensed basis. LinksPoint grants to the user a non-
transferable and non-exclusive license to use each software or rmware program
delivered hereunder (licensed program). Except as noted below, such license may not be
assigned, sublicensed, or otherwise transferred by the user without prior written consent of
LinksPoint. No right to copy a licensed program in whole or in part is granted, except as
permitted under copyright law. The user shall not modify, merge, or incorporate any form
or portion of a licensed program with other program material, create a derivative work from
a licensed program, or use a licensed program in a network without written permission
from LinksPoint. The user agrees to maintain LinksPoint’s copyright notice on the licensed
programs delivered hereunder, and to include the same on any authorized copies it
makes, in whole or in part.
The user agrees not to decompile, disassemble, decode, or reverse engineer any licensed
program delivered to the user or any portion thereof.
LinksPoint reserves the right to make changes to any software or product to improve
reliability, function, or design.
LinksPoint does not assume any product liability arising out of, or in connection with, the
application or use of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under any
Links Point, Inc., intellectual property rights. An implied license only exists for equipment,
circuits, and subsystems contained in LinksPoint products.
Links Point, Inc., LinksPoint, GlobalPoint™ are registered trademarks and trade names of
Links Point, Inc.
Symbol® is a registered trademark of Symbol Technologies, Inc.
Other product names mentioned in this manual may be trademarks or registered
trademarks of their respective companies and are hereby acknowledged.
Links Point, Inc.
One Selleck Street – Suite 330
Norwalk, CT 06855
United States of America
www.linkspoint.com
DRAFT 3 – JANUARY 10, 2005 NOT FOR RELEASE
LINKSPOINT USER GUIDE LINKSPOINT SERIAL GPS FOR SYMBOL
2
Revision History
September 19, 2006 edited draft
Table of Contents
Revision History..................................................................................................................2
Table of Contents ............................................................................................................... 2
Introduction ......................................................................................................................... 2
Connecting the LinksPoint Serial GPS Receiver External Power Version (LinksPoint Part
Number LP11631) to Symbol Vehicle Cradles................................................................... 3
Connecting the LinksPoint Serial GPS Receiver Serial Powered Version (LinksPoint Part
Number LP11632) to Symbol Vehicle Cradles................................................................... 6
Getting Started.................................................................................................................... 8
GlobalPoint GPS Software .................................................................................................9
Specications....................................................................................................................19
Regulatory Information ..................................................................................................... 21
Warranty ........................................................................................................................... 22
Service Information...........................................................................................................23
Introduction
This User Guide provides information about LinksPoint’s
SymbolPlus validated Serial GPS receiver for mobile
computers from Symbol Technologies.
The LinksPoint Serial GPS receiver collects GPS satellite
data and provides it to the mobile computer through the serial
port of a Symbol vehicle docking cradle. GPS information is
available to the handheld computer when docked. Two versions are available. One is
powered by an external 12V cigarette lighter adaptor and can be used with all MC900XX
and MC70 vehicle cradles. The second version can be used with MC70 cradle versions
that output power through the serial connector.
There are two versions of LinksPoint’s Serial GPS receiver:
LP11631– For use with all MC90XX and MC70 vehicle cradles. This version is
powered by a 12V DC “cigarette lighter” adaptor.
LP11632 – For use with MC70 vehicle cradle with power out through the serial
connector. This version is powered through the DB9 serial connector used to connect
the receiver to the cradle’s serial port. In this conguration, the GPS is powered only
when the mobile computer is docked in the cradle and a valid GPS com port is open
in a running GPS application.
The LinksPoint Serial GPS receiver has been tested for compatibility with the following
operating systems:
Windows® Mobile 2003 – MC90XX

Specyfikacje produktu

Marka: LinksPoint
Kategoria: odbiornik
Model: LP01632

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z LinksPoint LP01632, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik LinksPoint

LinksPoint

LinksPoint LP01633 Instrukcja

21 Września 2024
LinksPoint

LinksPoint LP01632 Instrukcja

18 Września 2024
LinksPoint

LinksPoint LP01634 Instrukcja

17 Września 2024
LinksPoint

LinksPoint LP01631 Instrukcja

17 Września 2024
LinksPoint

LinksPoint LP01635 Instrukcja

17 Września 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Denon

Denon AVR-S900W Instrukcja

15 Października 2024
Pro-Ject

Pro-Ject Amp Box DS2 Instrukcja

15 Października 2024
AKG

AKG HP12U Instrukcja

15 Października 2024
Apart

Apart SBR160 Instrukcja

14 Października 2024
American Audio

American Audio VLP 600 Instrukcja

14 Października 2024
Chord

Chord Anni Instrukcja

14 Października 2024
Sennheiser

Sennheiser EM 9046 SU Instrukcja

14 Października 2024
Yamaha

Yamaha MusicCast RX-V481 Instrukcja

13 Października 2024
JL Audio

JL Audio VX600/6i Instrukcja

12 Października 2024
Pioneer

Pioneer SX-303RDS Instrukcja

10 Października 2024