Instrukcja obsługi Lindy BTS-360

Lindy Kołyska/stacja dokująca BTS-360

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Lindy BTS-360 (12 stron) w kategorii Kołyska/stacja dokująca. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (January 2014)
BTS- 360
Bluetooth Speaker with NFC
User Manual English
Benutzerhandbuch Deutsch
Manuel Utilisateur Français
Manuale Italiano
No. 73146
www.lindy.com
Tested to Comply with
FCC Standards
For Home and Office Use!
User Manual English
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (January 2014)
Introduction
Thank you for purchasing the BTS-360 Bluetooth Speaker. With the BTS-360 you can enjoy high quality
audio from your portable audio device such as a SmartPhone or Tablet without being constrained by
wires. The BTS-360 also includes NFC functionality for quick and simple connection to NFC equipped
audio devices.
Package Contents
BTS-360 Bluetooth Speaker
USB Micro-B Cable
This manual
Features
High Quality 3600 Surround Sound Speaker
Bass reflex chamber for rich deep tones
Bluetooth 3.0 connectivity
NFC equipped for tap to pair functionality
Automatically powers down after 15 minutes of inactivity
Specification
High Quality 3600 Surround Sound Speaker
Bass reflex chamber
Bluetooth 3.0 with A2DP 1.2
Range: 10 15m –
Integrated NFC tag
3” Speaker
Output: 10W
Impedance: 4Ω
Frequency Range 86-21KHz
1000mAH Lithium Polymer battery, with 18 hour battery life
Automatic power down after 15 minutes of inactivity
USB Micro-B port for charging or external power
3.5mm port for auxiliary audio input
Operation
Charging
Before beginning to use the BTS-360 you must fully
charge the battery.
To charge the speaker, attach the supplied USB cable to
the Charging Port on the BTS-360 and to a computer,
USB AC Adapter or other powered USB port. The
Charging Indicator will illuminate when the BTS-360
begins charging, and turn off when charging is complete.
Please note charging the BTS-360 via a computer’s
USB port will take significantly longer than using a
dedicated USB charger, such as mobile phone or tablet
charger.
1. Bass Chamber
2. Power Button
3. 3.5mm Audio Port
4. Charging Port
5. Charging Indicator
1
2
3
4
5
User Manual English
Pairing with NFC devices
1. Enable NFC on your audio device
2. Press and briefly hold the Power Button on the
BTS-360 to switch it on
3. Touch the NFC area of your device against the NFC
Tag of the BTS-360
Pairing with Bluetooth devices
1. Press and briefly hold the Power Button on the
BTS-360 to switch it on
2. Press and hold the Pairing Key, the BTS-360 will
then bleep, continue to hold the Key down until the
blue light around the Pairing Key begins to blink
3. Enable Bluetooth on your audio device
4. On your audio device now begin a search for new
Bluetooth devices
5. From the list of available devices select LINDY
BTS-360
Once you have paired your device and the BTS-360 they should automatically connect in the future;
assuming Bluetooth is enabled on your audio device and you are within range of the BTS-360.
If after being switched on the BTS-360 does not make a Bluetooth connection after 15 minutes it will
power down to conserve battery. To manually power the speaker down press and hold the Power Button
for 5 seconds until the LED turns off.
When your audio device is connected to the B -360 you can control playback of audio and the output TS
volume directly from your audio device.
Battery/Charging Hazard
1. Only charge the battery in accordance with this user manual
2. Do not dispose of your BTS-360 in fire, as the battery could explode causing serious injury or
death
3. Do not attempt to disassemble the BTS-30 or force open the built-in battery as this may result in
an electric shock
4. Do not charge the BTS-360 in damp areas or in extremely high/low temperatures as this may
result in electric shock
5. Do not clean the BTS-360 whilst it is on charge or connected to the electrical power supply.
Always unplug the BTS-360 before cleaning
NFC Tag
Location
Pairing Key

Specyfikacje produktu

Marka: Lindy
Kategoria: Kołyska/stacja dokująca
Model: BTS-360

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Lindy BTS-360, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Kołyska/stacja dokująca Lindy

Lindy

Lindy BTS-360 Instrukcja

20 Września 2024

Instrukcje Kołyska/stacja dokująca

Najnowsze instrukcje dla Kołyska/stacja dokująca

Vorago

Vorago KSP-600 Instrukcja

9 Października 2024
Gembird

Gembird DD-U3M2 Instrukcja

9 Października 2024
Urban Factory

Urban Factory HCS02UF Instrukcja

9 Października 2024
Urban Factory

Urban Factory HCS01UF Instrukcja

9 Października 2024
Urban Factory

Urban Factory HCS04UF Instrukcja

9 Października 2024
Urban Factory

Urban Factory HCS03UF Instrukcja

9 Października 2024
Bose

Bose SoundLink Flex 2nd Gen Instrukcja

9 Października 2024
StarTech.com

StarTech.com UNIDOCK3UEU Instrukcja

9 Października 2024
StarTech.com

StarTech.com SATDOCKU2EGB Instrukcja

9 Października 2024
StarTech.com

StarTech.com SATDOCKU3FGB Instrukcja

9 Października 2024