Instrukcja obsługi Lindy 39371

Lindy nieskategoryzowany 39371

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Lindy 39371 (8 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 32 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/8

Cat.6 KVM Extender Classic HDMI USB Audio

User Manual English

Benutzerhandbuch Deutsch

Manuale d’uso Italiano

Manuel d’utilisateur Français

LINDY No. 1 3937

www.lindy.com

Tested to Comply with FCC Standards

For Home and Oﬃce Use!

Overview English

Thank you for purchasing the LINDY KVM Extender Classic. This product

allows you to control your PC using a keyboard, mouse and monitor with

a maximum resolution of Full HD 1080p or 1920x1200 at distances of up

to 50m (150 feet) using inexpensive CAT6 cable. It supports HDMI signals

including 3D, 1080p24 Blu-ray, audio and HDCP.

The KVM Extender Classic consists of a Transmitter unit which is installed

near the computer and a Receiver unit installed near the user console. The

Receiver unit connects to a USB keyboard and mouse HDMI monitor and ,

oﬀers a Stereo audio port via 3.5mm connector.

The Transmitter unit oﬀers the same connections and in addition, an

optional local console port (bypass).

Features English

 Provides a real-time convenient method of remotely controlling PCs

 Supports USB keyboard and mouse signals

 High resolution video support up to Full HD 1080p, 3D, HDCP, Audio of

and 1920x1200 for up to 50m

 Easy, user-friendly installation - no software required

Packaging Contents English

 Local Transmitter and Remote Receiver unit

 5V DC Power Adapter x2 (with multi-country adapters / 100…240V AC

for EUR, UK, US, AUS/China)

 1x USB to P A/B cable (for Transmitter) C

 This manual

Installation and Use English

The Extender units have a magnetic base and metal installation plate for

easy f ing in or under a shelf or wall. To detach the metal plate from the unitix ,

simply pull it oﬀ.

To connect the transmitter receiver unit, Cat. STP cable provides the and 6

best results. Do NOT use a LAN/Ethernet connection. You must always

use a dedicated direct cable! Adding any additional connections in-

between like wall outlets etc. will result in reduced distances!

If you intend to use a distance of more than 25m or if you want to lay cables

inside a cable duct, please ﬁrst test your RJ45 cables in a test installation

with the extender BEFORE you install them in your wall or cable duct!

The extender does not transmit EDID monitor data. It uses a default EDID

data set with common Full HD 1080p resolutions. If you intend to use a

monitor with special resolution and EDID data, you must copy the monitor

EDID data into the transmitter unit. To do so, disconnect all connections from

the transmitter, set both DIP switches to OFF/ position; connect up

the monitor to the HDMI OUT port and power on monitor and

transmitter. After a few seconds, when the yellow RJ45 port LED

has flashed once, the EDID data been copied permanentlyhas .

Unplug the monitor and set DIP switch No.2 ON/down position. If you set to

both DIP switches to ON position, the default EDID data will be used.

1. Transmitter Unit

Connect the Cat.6 RJ45 cable to the RJ45 port.

Connect the HDMI and the USB A/B cables to the transmitter and to your

computer. If you want to use the 3.5mm Stereo signal, please also connect

this port to your computer. If you want to use the optional local console just

connect your mouse, keyboard, monitor and stereo device.

Connect the power supply to the transmitter.

Please test the functionality of keyboard, monitor, mouse and speaker, to

make sure they are working properly with the transmitter unit.

2. Receiver Unit

Connect the Cat.6 RJ45 cable to the RJ45 port.

Connect the HDMI cable to the receiver and to your monitor. If you want

to use the 3.5mm Stereo signal, please connect this port to your stereo

device. Connect your mouse and keyboard to the USB ports.

Connect the power supply to the receiver.

The video quality can be adjusted by turning the EQ equalizer control knob

on the back of the receiver.

LED indicators (Transmitter & Receiver)

Status LEDs on top of the unit:

Blue RJ45 link OK –

Green HDMI signal active –

RJ45 Status LEDs ( LINK )

Yellow Solid: Power OK [TX: EDID copy indicator (ﬂashes 1x)] –

Green HDMI signal active –

Trouble Shooting English

If one yellow RJ45 power LEDs is not lit please check the power supply –

you may exchange TX and RX PSU.

If the blue LED on top fails, please check the RJ45 cable and test with a

short one. If the short cable works, exchange the long RJ45 cable with a

higher quality Cat.6/6A or Cat.7 S/STP. The maximum cable length should

not exceed 50m. 80m at 1080p60 might also be possible when using very

high quality solid core cable and high quality connectors and high quality

HDMI input signal.

If the green HDMI LED on top fails, please check and eventually exchange

your HDMI cables with shorter ones. If your screen stays black or if your

video image is blurred, the equalizer must be tuned to adjust the Extender

to the RJ45 cable properties.

If this does not help try to copy the monitor EDID data into the transmitter

as described previously.

The USB section supports USB mouse and keyboard only. USB hubs and

USB 2.0 devices NOT supported. are

Should you have further problems please contact the LINDY Support team

– worldwide contact information at www.lindy.com

Einführung Deutsch

Dieser KVM Extender Classic erlaubt Ihnen Monitor-, Audio- und USB-Maus-

und -Tastatursignale über ein Cat.6 Netzwerkkabel über eine Entfernung bis

zu 50m zu übertragen. Er unterstützt ebenfalls HDMI Full HD 1080p 3D, Blu-

ray , HDCP und Stereo Audio analog. 1080p24

Der KVM Extender assic besteht aus einem am Computer zu Cl

installierenden Transmitter und einem an der Konsole beim Bediener zu

installierenden Receiver. Der Receiver bietet Anschlüsse für Monitor, USB-

Maus & Tastatur und Stereo Audio Line Out über einen 3,5mm Anschluss.

Der Transmitter bietet die gleichen Anschlüsse und zusätzlich Anschlüsse

für eine lokale Konsole mit den gleichen Geräten (Bypass).

Eigenschaften Deutsch

 Erlaubt komfortablen Real Time Remote Zugriﬀ

 Unterstützt USB-Maus- -Tastatursignale und

 Unterstützt hohe Auﬂösungen bis Full HD 1080p, 3D, HDCP, Audio

sowie 1920x1200 bei Distanzen bis zu 50m

 Einfach zu bedienen und zu installieren - keine Softwareinstallation

Lieferumfang Deutsch

 Transmitter Receiver Unit und

 2 Netzteil 5V DC ~ 2Ax 1, , 100…240VAC mit Wechselsteckern für EURO,

US, UK, AUS/China

 1x USB A/B Kabel (für Transmitter)

 Diese Anleitung

Specyfikacje produktu

Marka:	Lindy
Kategoria:	nieskategoryzowany
Model:	39371
Kolor produktu:	Czarny
Rodzaj zasilania:	DC
Wysokość produktu:	29 mm
Szerokość produktu:	113 mm
Głębokość produktu:	62 mm
Waga produktu:	320 g
Wyjścia słuchawkowe:	2
Gniazdko wyjścia DC:	Tak
Zasilacz sieciowy:	Tak
Napięcie operacyjne:	5 V
Zakres temperatur (eksploatacja):	0 - 55 °C
Przewody:	USB
Kod zharmonizowanego systemu (HS):	84733020
Liczba portów USB 2.0:	5
Napięcie:	100 - 240 V
Diody LED:	Tak
Zakres temperatur (przechowywanie):	-20 - 85 °C
Model:	Nadajnik i odbiornik konsoli
Prąd wyjściowy:	1.2 A
Maks. rozdzielczość:	1920 x 1200 px
Maksymalny dystans transferu:	50 m
Obsługiwane rozdzielczości grafiki:	1920 x 1200 (WUXGA)
Ilość portów RJ-45:	2
Obsługiwane typy kabli:	Cat6