Instrukcja obsługi Lincoln Electric VIKING ArcSpecs


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Lincoln Electric VIKING ArcSpecs (19 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/19
GRAPHICS MAY VARY
Operator’s Manual
VIKING
ArcSpecs
Auto-Darkening Welding Goggles
with 4C
Technology
Register your machine:
www.lincolnelectric.com/register
Authorized Service and Distributor Locator:
www.lincolnelectric.com/locator
Save for future reference
Date Purchased
Code: (ex: 10859)
Serial: (ex: U1060512345)
IM10544 | Issue D ate Aug-19
© Lincoln Global, Inc. All Rights Reserved.
TABLE OF CONTENT Page
SAFETY WARNINGS – READ BEFORE USING 1
WELDING GOGGLE INFORMATION 2
SPECIFICATIONS 3
OPERATING INSTRUCTIONS 4
GOGGLE OPERATIONS/FEATURES 5
GRIND BUTTON OPERATION 8
GOGGLE CARE AND MAINTENANCE 9
SHADE GUIDE SETTINGS 14
TROUBLESHOOTING 15
WARRANTY INFORMATION 16
REPLACEMENT PARTS, OPTIONAL ACCESSORIES 16
SAFETY WARNINGS – READ BEFORE USING
ARC Rays can injure eyes and burn skin
• Before welding, always inspect goggle and filter lens to be sure they are fitted
properly, in good condition and not damaged.
• Check to see that the clear lens is clean and securely attached to the goggles.
• Always wear safety glasses or goggles under the welding goggles and protec-
tive clothing to protect your skin from radiation, burns and spatter.
• Ensure that optical radiation from other welder's arcs in the immediate area
does not enter in from behind the goggles and auto-darkening filter.
Note: Auto-darkening filters in Lincoln goggles are designed to protect the user against harmful
ultra-violet and infrared rays both in the dark and light states. No matter what shade the filter is
set to, the UV/IR protection is always present.
FUMES AND GASES can be dangerous to your health.
• Keep your head out of fumes.
• Use enough ventilation or exhaust at the arc or both to keep fumes and gases
from your breathing zone and general area.
• When welding with electrodes which require special ventilation such as
stainless or hard facing (see instructions on container or MSDS) or on
lead or cadmium plated steel and other metals or coatings which
produce highly toxic fumes, keep exposure as low as possible and within
applicable OSHA PEL and ACGIH TLV limits using local exhaust or
mechanical ventilation. In confined spaces or in some circumstances,
outdoors, a respirator may be required. Additional precautions are also
required when welding on galvanized steel.
1
WARNING
Refer to http://www.lincolnelectric.com/safety
for additional safety information.


Specyfikacje produktu

Marka: Lincoln Electric
Kategoria: nieskategoryzowany
Model: VIKING ArcSpecs

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Lincoln Electric VIKING ArcSpecs, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Lincoln Electric

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024