Instrukcja obsługi Lightware HDMI-3D-OPT-RX150RA

Lightware przedłużacz AV HDMI-3D-OPT-RX150RA

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Lightware HDMI-3D-OPT-RX150RA (97 stron) w kategorii przedłużacz AV. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/97

HDMI-3D-OPT-TX210A

HDMI-3D-OPT-TX210RAK

SW4-OPT-TX240RAK

HDMI-3D-OPT-RX150RA

User’s Manual

Fiber Optical Multimedia Extender

HDMI-3D-OPT series – User's Manual 2

Important Safety Instructions

Class II apparatus construction.

The equipment should be operated only from the power source

indicated on the product.

To disconnect the equipment safely from power, remove the power

cord from the rear of the equipment, or from the power source. The

MAINS plug is used as the disconnect device, the disconnect device

shall remain readily operable.

There are no user-serviceable parts inside of the unit. Removal of the

cover will expose dangerous voltages. To avoid personal injury, do not

remove the cover. Do not operate the unit without the cover installed.

The appliance must be safely connected to multimedia systems.

Follow instructions described in this manual.

Ventilation

For the correct ventilation and to avoid overheating ensure enough

free space around the appliance. Do not cover the appliance, let the

ventilation holes free and never block or bypass the ventilators (if any).

WARNING

To prevent injury, the apparatus is recommended to securely attach to

the oor/wall or mount in accordance with the installation instructions.

The apparatus shall not be exposed to dripping or splashing and that

no objects lled with liquids, such as vases, shall be placed on the

apparatus. No naked ame sources, such as lighted candles, should

be placed on the apparatus.

Waste Electrical & Electronic Equipment

WEEE

This marking shown on the product or its literature,

indicates that it should not be disposed with other

household wastes at the end of its working life. To

prevent possible harm to the environment or human

health from uncontrolled waste disposal, please

separate this from other types of wastes and recycle it

responsibly to promote the sustainable reuse of material

resources. Household users should contact either the

retailer where they purchased this product, or their local government

ofce, for details of where and how they can take this item for

environmentally safe recycling. Business users should contact their

supplier and check the terms and conditions of the purchase contract.

This product should not be mixed with other commercial wastes for

disposal.

Caution: Laser product

INVISIBLE LASER RADIATION

AVOID DIRECT EYE EXPOSURE

CLASS 3R LASER PRODUCT

Radiated wavelenght:

778 nm, 800 nm, 825 nm, 850 nm, 911 nm, 980 nm

Output power <= 1 mW

Classified by EN 60825-1:2007

Common Safety Symbols

Symbol Description

Direct current

Alternating current

Double insulation

Caution, possibility of eletric shock

Caution

Laser radiation







HDMI-3D-OPT series – User's Manual 3

Symbol Legend

The following symbols and markings are used in the document:

WARNING! Safety-related information which is highly

recommended to read and keep in every case!

ATTENTION! Useful information to perform a successful procedure;

it is recommended to read.

INFO: A notice which may contain additional information. Procedure

can be successful without reading it.

DEFINITION: The short description of a feature or a function.

TIPS AND TRICKS: Ideas which you may have not known yet but can

be useful.

Navigation Buttons

Go back to the previous page. If you clicked on a link peviously,

you can go back to the source page by clicking the button.

Navigate to the Table of Contents.

Step back one page.

Step forward to the next page.









Document Information

This User’s Manual applies to the following versions of the mentioned

software, rmware, and hardware:

Item Version

Lightware Device Controller (LDC) software 1.18.0b6

Lightware Device Updater (LDU) software 1.5.0b8

Controller rmware - Transmitters 1.1.0

Controller rmware - Receiver 2.0.0

Hardware - Transmitters 1.1

Hardware - Receiver 1.3

Document revision: 2.1

Release date: 31-10-2018

Editor: Laszlo Zsedenyi







Specyfikacje produktu

Marka:	Lightware
Kategoria:	przedłużacz AV
Model:	HDMI-3D-OPT-RX150RA
Kolor produktu:	Czarny
Częstotliwość wejściowa AC:	50 - 60 Hz
Napięcie wejściowe AC:	100 - 240 V
Wysokość produktu:	26 mm
Szerokość produktu:	100.4 mm
Głębokość produktu:	131.9 mm
Waga produktu:	430 g
Technologia łączności:	Przewodowa
Certyfikaty:	CE
Ilość portów USB:	3
Obsługiwany typ USB:	Mini-USB B, USB Type-A
Gniazdko wyjścia DC:	Tak
Zasilacz sieciowy:	Tak
Napięcie pracy:	5 V
Zakres temperatur (eksploatacja):	0 - 55 °C
Zakres wilgotności względnej:	10 - 90 %
Kompatybilność 3D:	Tak
Diody LED:	Tak
Model:	Amplituner
Prąd wyjściowy:	2.5 A
Adapter zewnętrznego zasilania:	Tak
Maks. rozdzielczość:	4096 x 2048 px
Maksymalna częstotliwość odświeżania:	120 Hz
Wersja HDMI:	1.4
HDCP:	Tak
Szerokość pasma:	9 Gbit/s
Materiały:	Metal
Złącze światłowodowe:	SC
Maksymalny dystans transferu:	2500 m
Obsługiwane tryby wideo:	720p, 1080i, 1080p, 2160p
Głębia kolorów:	36 bit
Wyjście audio:	S/PDIF
Wspierane długości fal:	850 nm
Struktura światłowódu jednomodowego:	Multifunkcyjny
Rozszerzone dane identyfikacyjne wyświetlacza (EDID):	Tak
Porty wyjściowe RS-232:	1
Zużycie prądu (odbiornik) (max):	6.5 mA
Przejście HDCP:	Tak
Przejście RS-232:	Tak
Pobór mocy (RX):	3.9 W