Instrukcja obs艂ugi LifeGear Streamline Plus - Magnetic Recumbent Bike 26560

LifeGear Rower treningowy Streamline Plus - Magnetic Recumbent Bike 26560

Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla LifeGear Streamline Plus - Magnetic Recumbent Bike 26560 (14 stron) w kategorii Rower treningowy. Ta instrukcja by艂a pomocna dla 25 os贸b i zosta艂a oceniona przez 2 u偶ytkownik贸w na 艣rednio 4.5 gwiazdek

Pobierz PDF
Strona 1/14
Streamline Plus,
Magnetic Recumbent Bike
Item No.: 26560
Owner鈥檚 Manual
IMPORTANT: Read all instructions carefully before using this product. Retain this
owner鈥檚 manual for future reference.
The specifications of this product may vary from this photo, subject to change without notice.
2010, June
1
TABLE OF CONTENTS
WARRANTY ------------------------------------------------------------------------------- 1
SAFETY INSTRUCTIONS ------------------------------------------------------------- 2
ADJUSTMENTS -------------------------------------------------------------------------- 3
OPERATING THE COMPUTER ------------------------------------------------------ 3
PARTS LIST ------------------------------------------------------------------------------- 5
HARDWARE PACKING LIST --------------------------------------------------------- 6
TOOLS -------------------------------------------------------------------------------------- 6
OVERVIEW DRAWING ----------------------------------------------------------------- 7
ASSEMBLY INSTRUCTIONS --------------------------------------------------------- 8
MAINTENANCE -------------------------------------------------------------------------- 10
TROUBLESHOOTING ------------------------------------------------------------------ 10
WARM UP AND COOL DOWN ROUTINE ----------------------------------------- 11
ONE YEAR LIMITED WARRANTY
LifeGear Inc. warrants to the original purchaser that this product is free from defects in
material and workmanship when used for the purpose intended, under the conditions that it
has been installed and operated in accordance with LifeGear's Owner's Manual. LifeGear's
obligation under this warranty is limited to replacing or repairing, free of charge, any parts
which may prove to be defective under normal home use. This warranty does not include
any damage caused by improper operation, misuse or commercial application.
From the date of purchase, the frame is warranted to be free from defects for 1 (one) year.
This warranty is extended only to the original owner and is not transferable.
When ordering replacement parts please have the following information ready:
1. Owner's Manual
2. Model Number
3. Description of Parts
4. Part Number
5. Date of Purchase
2
SAFETY INSTRUCTIONS
Basic precautions should always be followed, including the following safety
instructions when using this equipment: Read all instructions before using this
equipment.
1. Read all the instructions in this manual and do warm up exercises before using this
equipment.
2. Before exercise, in order to avoid injuring the muscle, warm-up exercise of every
position of the body is necessary. Refer to Warm Up and Cool Down Routine page.
After exercise, relaxation of the body is suggested for cool-down.
3. Please make sure all parts are not damaged and fixed well before use. This
equipment should be placed on a flat surface when using. Using a mat or other
covering material on the ground is recommended.
4. Please wear proper clothes and shoes when using this equipment; do not wear clothes
that might catch any part of the equipment; remember to tighten the pedaling straps.
5. Do not attempt any maintenance or adjustments other than those described in this
manual. Should any problems arise, discontinue use and consult an Authorized
Service Representative.
6. Do not use the equipment outdoors.
7. This equipment is for household use only.
8. Only one person should be on the equipment while in use.
9. Keep children and pets away from the equipment while in use. This machine is
designed for adults only. The minimum free space required for safe operation is not
less than two meters.
10. If you feel any chest pains, nausea, dizziness, or short of breath, you should stop
exercising immediately and consult your physician before continuing.
11. The maximum weight capacity for this product is 110kgs.
WARNING: Before beginning any exercise program consult your physician.
This is especially important for the persons who are over 35 years old or who have
pre-existing health problems. Read all instructions before using any fitness
equipment.
CAUTION: Read all instructions carefully before operating this product.
Retain this Owner鈥檚 Manual for future reference.
5
PARTS LIST
No. Description Qty No. Description Qty
001 Backrest Support Bracket 1 031 Curve Washer 脴10 4
002 Front Stabilizer 1 032 Cap Nut M10 4
003 Rear Main Frame 1 033 Left Cover 1
004 Rear Stabilizer 脴50x1.5x430 1 034 Right Cover 1
005 Front Main Frame 1 035 Screw ST4.2x20 10
006 Front Handlebar Post 1 036 Bolt M5x25 1
007 Seat Cushion 245x345x40 1 037 Bushing 1
008 Back Cushion 345x300x40 1 038 Flat Washer 脴5 1
009 Computer (JVT29104) 1 039 Bolt M5x12 4
010 Handlebar Foam Grip
脴32x脴23x140 2 040 Tension Cable L=1000mm 1
011 Hand Pulse Sensor 2 041 Axle Bush 2
012 Round End Cap for Handlebar
脴25x1.5 4 042 Ball Bearing 2
013 Handlebar 1 043 Axle Sleeve I 1
014 Tension Control Knob 1 044 Hexagon Nut 1
015 Rear Stabilizer End Cap 脴50x1.5 2 045 Ring 1
016 Transport Wheel 脴6 2 046 Crank 1
017 Round Knob M16x1.5 1 047 Flywheel 1
018 Front Stabilizer End Cap
脴50x1.5 2 048 Idle Wheel Bracket 1
019 Front Handlebar Foam Grip
脴32x脴23x120 2 049 Adjustable Bolt M6 2
020 Rubber Cover 1 050 U Bracket 2
021 Bolt M6x15 8 051 Spring Washer 脴6 2
022 Backrest Support Bracket End
Cap 38x38x2 2 052 Nut M6 2
023 Bolt M8x15 5 053 Nut for Flywheel M10 2
024 Flat Washer 脴8 10 054 Bearing 6000 2Z 2
025 Curve Washer 脴8 3 055 Bolt M8x20 1
026 Flat Washer 7/8" 1 056 Bolt M8x10 1
027 Wire Plug 脴12.1 2 057 Bolt M6x10 1
028 Bolt M6x48 2 058 Flat Washer 脴6 9
029 Locknut M6 2 059 Left Pedal YH-30X 1
030 Bolt M10x57 4 060 Right Pedal YH-30X 1
6
PARTS LIST
No. Description Qty No. Description Qty
061 Sensor with Wire L=500mm 1 069 Pan Head Phillips Self Drilling
Screw ST4.2x20 4
062 Belt 330J6 1 070 Bolt M8x45 2
063 Extension Wire L=350mm 2 071 Cap Nut M8 4
064 Extension Sensor Wire
L=350mm 1 072 Axle Sleeve II 1
065 Extension Hand Pulse Sensor
Wire L=1800mm 2 073 Front Handlebar Post Cover 1
066 Rear Main Frame End Cap 1 074 Cover Cap 脴50x1.2t 1
067 Screw ST2.9x12 2 075 Cover Cap 脴50x10t 1
068 Hand Pulse Sensor Wire
L=650mm 2 076 Bolt M8x10 4
HARDWARE PACKING LIST
TOOLS
A
llen Wrench 6mm
1 PC
(23) Bolt M8x15
4 PCS
(32) Cap Nut M10
4 PCS
(31) Curve Washer 脴10
4 PCS
(30) Bolt M10x57
4 PCS
(24) Flat Washer 脴8
4 PCS
Multi Hex Tool with Phillips Screwdrive
r
1 PC
(71) Cap Nut M8
2 PCS
Multi Hex Tool
1 PC
9
3. Install the Backrest Support Bracket and
Handlebar.
Attach the Backrest Support Bracket (1) onto the Rear
Main Frame (3) with four M8x15 Bolts (23), 脴8 Flat
Washers (24), and two M8 Cap Nuts (71).
Remove two M8x45 Bolts (70), 脴8 Curve Washers (25),
脴8 Flat Washers (24), and M8 Cap Nuts (71) from the
Handlebar (13). Then attach the Handlebar (13) onto
the Backrest Support Bracket (1) with two M8x45 Bolts
(70), 脴8 Curve Washers (25), 脴8 Flat Washers (24),
and M8 Cap Nuts (71) that were removed.
Connect the Hand Pulse Sensor Wires (68) from the
Handlebar (13) to the Extension Hand Pulse Sensor
Wires (65) from the Rear Main Frame (3).
4. Install the Computer.
Remove four M5x12 Bolts (39) from the Computer (9).
Connect the Extension Wires (63) and Extension
Sensor Wire (64) to the wires that come from the
Computer (9) and then attach the Computer (9) onto the
plate of the Front Handlebar Post (6) with four M5x12
Bolts (39) that were removed.
5. Install the Seat Cushion and Back Cushion.
Remove four M6x15 Bolts (21) and 脴6 Flat Washers (58)
from the Seat Cushion (7). Then attach the Seat
Cushion (7) onto the Backrest Support Bracket (1) with
four M6x15 Bolts (21) and 脴6 Flat Washers (58) that
were removed.
Remove four M6x15 Bolts (21) and 脴6 Flat Washers (58)
from the Back Cushion (8). Then attach the Back
Cushion (8) onto the Backrest Support Bracket (1) with
four M6x15 Bolts (21) and 脴6 Flat Washers (58) that
were removed.
1
71
24
13
65
68
24
23
24
23
3
9
8
58 21
1
3
7
58
21
70
25
63
64
39
13
6
71
71
3
4
5
10
MAINTENANCE
Cleaning
The recumbent bike can be cleaned with a soft cloth and mild detergent. Do not use
abrasives or solvents on plastic parts. Please wipe your perspiration off the bike after each
use. Be careful not get excessive moisture on the computer display panel as this might
cause an electrical hazard or electronics to fail.
Please keep the recumbent bike, specially, the computer console, out of direct sunlight to
prevent screen damage.
Please inspect all assembly bolts and pedals on the machine for proper tightness every
week.
Storage
Store the recumbent bike in a clean and dry environment away from children.
TROUBLESHOOTING
PROBLEM: The recumbent bike wobbles when in use.
SOLUTION: Turn the rear stabilizer end cap on the rear stabilizer as needed to level the
recumbent bike.
PROBLEM: There is no display on the computer console.
SOLUTION: Remove the computer console and verify the wires that come from the
computer console are properly connected to the wires that come from the handlebar post.
SOLUTION: Check the batteries are correctly positioned and battery springs are proper
contact with batteries.
SOLUTION: The batteries in the computer console may be dead. Change the new
batteries.
PROBLEM: There is no heart rate reading or heart rate reading is erratic or inconsistent.
SOLUTION: Make sure that the wire connections for the hand pulse sensors are secure.
SOLUTION: To ensure the pulse readout is more precise, please always hold on to the
handlebar grip sensors with two hands instead of just with one hand only when you try to test
your heart rate figures.
SOLUTION: Gripping the hand pulse sensors too tight. Try to maintain moderate pressure
while holding onto the hand pulse sensors.
PROBLEM: The recumbent bike makes a squeaking noise when in use.
SOLUTION: The bolts may be loose on the recumbent bike, please inspect the bolts and
tighten the loose bolts.

Specyfikacje produktu

Marka: LifeGear
Kategoria: Rower treningowy
Model: Streamline Plus - Magnetic Recumbent Bike 26560

Potrzebujesz pomocy?

Je艣li potrzebujesz pomocy z LifeGear Streamline Plus - Magnetic Recumbent Bike 26560, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮


Instrukcje Rower treningowy LifeGear

LifeGear

LifeGear Advanced - Magnetic Upright Bike 20390 Instrukcja

23 Wrze艣nia 2024
LifeGear

LifeGear Formula 2 in 1 Elliptical Trainer 93586 Instrukcja

23 Wrze艣nia 2024
LifeGear

LifeGear Jupiter - 2 in 1 Elliptical Trainer 93726 Instrukcja

23 Wrze艣nia 2024
LifeGear

LifeGear Transport - EMS Magnetic Upright Bike 20695 Instrukcja

23 Wrze艣nia 2024
LifeGear

LifeGear Evoke Easy Entry - Magnetic Upright Bike 20296 Instrukcja

23 Wrze艣nia 2024
LifeGear

LifeGear Accord Two in One Elliptical Trainer 93476 Instrukcja

20 Wrze艣nia 2024
LifeGear

LifeGear Meteor - Magnetic Recumbent Bike 26590 Instrukcja

17 Wrze艣nia 2024
LifeGear

LifeGear Streamline Plus - Magnetic Recumbent Bike 26560 Instrukcja

15 Wrze艣nia 2024
LifeGear

LifeGear Mercury Magnetic Recumbent Bike 26570 Instrukcja

15 Wrze艣nia 2024
LifeGear

LifeGear Swany - Magnetic upright Bike 20460A Instrukcja

14 Wrze艣nia 2024

Instrukcje Rower treningowy

Najnowsze instrukcje dla Rower treningowy

Kettler

Kettler Elyx 3 Instrukcja

14 Stycznia 2025
Schwinn

Schwinn 470i Instrukcja

12 Stycznia 2025
Elite

Elite Direto XR Instrukcja

12 Stycznia 2025
Schwinn

Schwinn AD2 Instrukcja

12 Stycznia 2025
VirtuFit

VirtuFit Power Tower Instrukcja

12 Stycznia 2025
VirtuFit

VirtuFit Power Tower Deluxe Instrukcja

12 Stycznia 2025
Horizon Fitness

Horizon Fitness Ti 51 HRC Instrukcja

11 Stycznia 2025
Finnlo

Finnlo Roton Stressless 3166 Instrukcja

11 Stycznia 2025
Body Solid

Body Solid GCEC-340 Instrukcja

11 Stycznia 2025
Horizon

Horizon Comfort 4.0 Instrukcja

10 Stycznia 2025