Instrukcja obsługi LevelOne PLI-2040
LevelOne
Powerline adapter
PLI-2040
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla LevelOne PLI-2040 (8 stron) w kategorii Powerline adapter. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/8
LevelOne
PLI- 2040
200Mbps HomePlug AV Adapter
User Manual
V1.1
HomePlug PowerLine
HomePlug PowerLine is an excellent solution that can be used to extend your network. In the home or small office
building, use HomePlug Ethernet Bridge Adapters to link multiple locations without the need to run Ethernet cable.
Combined with a broadband DSL/Cable connection, every room with electrical power outlets will have easy access
to high-speed Internet connection.
Introduction
200Mbps HomePlug AV Adapter allows you to connect any device which has an Ethernet port to a PowerLine net-
work. In operation, the HomePlug AV Adapter is completely transparent, and simply passes data between 200Mbps
the Ethernet port and the PowerLine network. The PowerLine data transfer rate can reach be ed up to 200Mbps.
Any device may be connected to the HomePlug Ethernet Bridge s Ethernet port, but a Windows PC must 200Mbps ’
be used for configuration.
* Strongly recommend Windows 2000/XP/Vista for utility configurati /7 on
Physical Details
Figure 1 Mbps HomePlug AV Adapter : 200
Front Panel LEDs
Power
On - Normal operation.
Off - No power
Sleep - blanking
HomePlug
On - The PowerLine network is active. This means that at least one other HomePlug de-
vice was detected.
Off - PowerLine network is not available - HomePlug devices were detected. no other
Flashing - Data is being transmitted or received via the PowerLine network.
Ethernet
On - Ethernet connection is active.
Off - No Ethernet connectio n.
Flashing - Data is being transmitted or received via the Ethernet Port.
LED Link quality (Data PHY Rate)
Green:100 ~ (good link quality) Mbps
Orange:50~99Mbps
Red: less 50Mbps (bad link quality)
Setup
Configuration requires the use of Windows PC. Once configured, any device may be connected to the 200Mbps
HomePlug AV Adapter's Ethernet port. To perform configuration, follow procedures list below. the
1. 200 Connect a standard LAN cable from the Mbps HomePlug AV Adapter's Ethernet port to your PC.
2. 200 Plug the Mbps HomePlug AV Adapter into a power outlet.
3. Wait a few seconds for startup to be completed, and then check the LEDs
The LED should be ON. Power
The LED will be ON if other HomePlug devices are detected, otherwise it will be OFF. HomePlug
The LED should be ON. Ethernet
4. Insert the supplied CD-ROM into your Windows PC, and wait for it to start, select Utility“ ” from the autorun
screen. If it does not start automatically, locate and run SETUP.EXE.
5. Follow the prompts to install the utility. PLI-2040
Specyfikacje produktu
| Marka: | LevelOne |
| Kategoria: | Powerline adapter |
| Model: | PLI-2040 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z LevelOne PLI-2040, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Powerline adapter LevelOne
21 Sierpnia 2024
3 Lipca 2024
2 Lipca 2024
Instrukcje Powerline adapter
- Powerline adapter TP-Link
- Powerline adapter StarTech.com
- Powerline adapter Nedis
- Powerline adapter TRENDnet
- Powerline adapter D-Link
- Powerline adapter Manhattan
- Powerline adapter Strong
- Powerline adapter ZyXEL
- Powerline adapter Netgear
- Powerline adapter AVM
- Powerline adapter Devolo
- Powerline adapter Edimax
- Powerline adapter Eminent
- Powerline adapter Sitecom
Najnowsze instrukcje dla Powerline adapter
19 Września 2024
17 Września 2024
14 Września 2024
13 Września 2024
8 Września 2024
6 Września 2024
5 Września 2024
3 Września 2024
31 Sierpnia 2024
31 Sierpnia 2024