Instrukcja obsługi LevelOne NVR-0204
LevelOne
Rejestrator głosu
NVR-0204
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla LevelOne NVR-0204 (71 stron) w kategorii Rejestrator głosu. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/71
User Manual
Ver. 1.1
NVR-0204/0208/0216
4-CH/8-CH/16-CH Network Video Recorder
English
Use
r
’
s Manual
English
Use
r
’
s Manual
LevelOne
Network Video Recorder
Table of Contents
Copyrights, Trademarks & GPL 3
System Requirements 4
Product Description 5
Hardware Illustration 6
I/O Ports and RS-485 7
LEDs Definition 8
Install Hard Disk 9
Connect to the NVR 12
1. Live View 16
1.1 Retrieve camera’s video stream 18
1.2 Retrieve camera’s status 18
1.3 Perform Sequence Viewing 19
1.4 PTZ Control 20
1.5 Perform PTZ Preset Viewing 21
1.6 Live Video Control Buttons 23
1.7 Change Web UI Display Language 26
2. Playback 27
2.1 Methods to Search Playback Videos 28
2.2 Export Playback Videos to AVI Files 34
3. System Setup 36
3.1 System Configurations 36
3.1.1 Network Settings 36
3.1.2 Time and Date 38
3.1.3 User Account 39
3.1.4 Group Privilege 40
3.1.5 Disk Setup 42
3.2 Channel Configurations 43
3.2.1 Add a Camera 43
3.2.2 OSD Settings 46
3.2.3 PTZ Preset Settings 47
3.2.4 PTZ Preset Sequence 48
3.2.5 E-Map Monitor 49
3.3 Event Configurations 51
3.3.1 General Settings 51
3.3.2 I/O Settings 52
3.3.3 Event Servers 54
3.3.4 Event Triggers 58
3.4 Recording Configurations 60
3.4.1 General Settings 60
3.4.2 Schedule Recording 62
3.5 System Options 64
3.5.1 Device Information 64
3.5.2 Logs and Reports 65
3.5.3 Maintenance 65
Reboot the NVR 66
Reset the NVR to Factory Default 67
Hardware reset procedure 67
3.5.4 DO Status 68
3.5.5 Disk Status 68
3.5.6 UPS Configuration 69
3.6 NVR Recording time for reference 70
2
LevelOne NVR Series
Network Video Recorder
English
Use
r
’
s Manual
LevelOne
Network Video Recorder
Copyrights , Trademarks & GPL
Copyright
© 2009 Digital Data Communications GmbH.
Trademarks
LevelOne NVR-0204/0208/0216 Network Video Recorder (NVR) is a registered
trademark of Digital Data Communications GmbH.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
All other trademarks mentioned in this document are trademarks of their
respective owners.
Disclaimer
This document is intended for general information purposes only, and due care
has been taken in its preparation.
Any risk arising from the use of this information rests with the recipient, and
nothing herein should be construed as constituting any kind of warranty.
Digital Data Communications GmbH reserves the right to make adjustments
without prior notification.
All names of people and organizations used in these documents examples
are fictitious. Any resemblance to any actual organization or person, living or
dead, is purely coincidental and unintended.
General Public License
This product incorporates open source code into the software and therefore falls
under the guidelines governed by the General Public License (GPL) agreement.
Adhering to the GPL requirements, the open source code and open source license
for the source code are available for free download at . http://global.level1.com
If you would like a copy of the GPL or other open source code in this software on a
physical CD medium, LevelOne (Digital Data Communications) offers to mail this CD
to you upon request, for a price of US$9.99 plus the cost of shipping.
3
3
LevelOne NVR Series
Network Video Recorder
5
English
Use
r
’
s Manual
LevelOne
Network Video Recorder
System Requirements
The following are minimum system requirements for the system to operate
LevelOne Network Video Recorder (NVR):
Operating System
Microsoft® Windows® 2000 Professional, Windows® XP Professional
(32 bit) or Windows® Server 2003 (32 bit)
Browser
Microsoft Internet Explorer 6 or above
CPU
Minimum Intel® Pentium® 4 2.4 GHz or higher (Dual Core is recommended)
RAM
Minimum 1 GB of RAM, 2GB or above is recommended
Network
Minimum 10/100 Ethernet (Gigabit Ethernet is recommended)
Graphics Adapter
AGP or PCI-Express, minimum 1024x768, 16 bit colors.
(We highly recommend to work above the 1024 x 768 resolution to get the full
experience of the software)
.
Make sure your display DPI setting is set to default at 96DPI
.
To set DPI value, right-click on desktop, choose “Settings” tab >> “Advanced” >>
“General
”
Contents
inside
the
Installation
CD
.
Adobe Acrobat Reader
.
LevelOne Device Search Utility
LevelOne NVR Management Software
.
User’s Manual
.
Quick installation Guide
Default Settings
IP Address DHCP address
Username root
Password root
LevelOne NVR Series
Network Video Recorder
4
6
English
Use
r
’
s Manual
Product Description
The LevelOne Network Video Recorder is designed for use within a
surveillance system, and performs recordings and playbacks pictures from
network cameras in the system. It is a recording device using a hard disk drive
to record camera pictures instead of using video tapes so that pictures recorded
by repeated overwriting will not experience deterioration of the recorded picture
quality. Up to 4 (for NVR-0204) or 8 (for NVR-0208) or 16 (for NVR-0216) cameras
can be connected via a network and it is possible to record their camera pictures.
It is possible to perform the settings or operate the NVR using a web browser
installed on a PC connect to a network, or remote controller. Recorded video can
be played back from remote site by a PC. Up to 4 PCs (web browsers) can
access this unit concurrently and it is possible to perform the settings and
operate this unit. The NVR is compatible with most major brand cameras and
its ability to automatically search and find the available cameras on the
network can greatly reduce the user effort when expanding the system.
.
Advance PTZ Control
.
Various Types Event Alerts
.
Pure Web Based Administration
.
Linux-embedded Operating System
.
. Export Recorded Videos to AVI
.
Compatible with Major Brand Cameras
.
High Quality Live/Playback Videos
.
LevelOne Smart Camera Search
4
5
LevelOne NVR Series
Network Video Recorder
7
English
Use
r
’
s Manual
Hardware
Illustration
(Front)
6
LevelOne NVR Series
Network Video Recorder
8
English
Use
r
’
s Manual
I/O
Ports and RS-485 (Rear)
Pin
Signal
1
DCIN
2
GND
3 ~ 10
Alarm input
11
Out1
12
Out2
13
Out3
14
Out4
15
RS485+
16
RS485-
7
LevelOne NVR Series
Network Video Recorder
10
English
Use
r
’
s Manual
Install
Hard Disk
Start by removing the screws on the side:
Push the top housing forward
Then lift it up
. The NVR supports SATA I or SATA II
hard disks
. The NVR supports max. 1TB per hard
disk and it supports total of 2 hard disks
2TB)
9
LevelOne NVR Series
Network Video Recorder
1
English
Use
r
’
s Manual
Remove the hard drive cover plate
Pull out the hard drive tray holder
Place the hard drive on the tray and push it inward to secure the hard
drive
10
LevelOne NVR Series
Network Video Recorder
English
Use
r
’
s Man
ual
LevelOne
Network Video Recorder
Connect the SATA cable to the hard drive
Put the hard drive tray cover plate back
Place the top housing back and secure it with the bottom
housing
11
LevelOne NVR Series
Network Video Recorder
English
Use
r
’
s Manual
LevelOne
Network Video Recorder
Connect to the NVR
There are various ways you can connect to the NVR and below are the
suggested methods for different network setup:
.
The NVR is placed in a network with a DHCP server: Connect to the
NVR by using “Search NVR” Utility
.
The NVR is placed in a network without DHCP server (or you are
connecting to it directly): Access NVR with its default IP
Use LevelOne Device Search Utility
If the NVR is placed in a corporate network or a local area network where a
DHCP server is already presented, install the “LevelOne Device Search” utility
on the CD from a computer that is on the same network and locate the NVR
with its IP address that is assigned by the top-level DHCP server.
To begin, launch the “LevelOne Device Search” utility from the CD and
proceed with the installation:
12
LevelOne NVR Series
Network Video Recorder
English
Use
r
’
s Manual
LevelOne
Network Video Recorder
Once the installation is complete, check the “Launch the Search AP” option
and click “Finish”:
The search should start automatically and its status should be displayed:
The NVR should be located and its IP address should be displayed: Double-
click on it and the program should automatically access the NVR’s web
administration page from your default browser
You may change NVR’s IP address by click on the button highlighted below.
13
13
LevelOne NVR Series
Network Video Recorder
English
Use
r
’
s Manual
LevelOne
Network Video Recorder
You will be prompted for the NVR’s login information before proceeding to
change device’s IP address.
You may click on the button highlighted below to perform search again. Or
double-click on any of the search results to access NVR’s web administration
page
perform search again access NVR’s web administration page
You should be prompted for the NVR’s username and password. Enter its
default username “admin password” and password “ ” and then click ”OK” to
enter the system
14
LevelOne NVR Series
Network Video Recorder
English
Use
r
’
s Manual
LevelOne
Network Video Recorder
1. Live View
NVR-0216
Camera List
PTZ Control
Live Video
Live Video Control Buttons
NVR-0208
The 8 channel NVR comes with an 8-video split window view
with one video displays on a larger window. Select a channel
from the drop-down menu to display its video on the larger
split window. You can also double-click on any of the smaller
one to display its video to the larger window.
16
LevelOne NVR Series
Network Video Recorder
English
Use
r
’
s Manual
LevelOne
Network Video Recorder
NVR-0204
The “Live View” page provides the following functions:
.
Retrieve camera’s video stream
.
Retrieve camera’s status
.
Perform Live Sequence Viewing
.
PTZ Control
.
Perform PTZ Preset Sequence viewing
.
Perform manual recording
.
Take snapshot
.
Receive audio of a video stream
.
Send audio
.
Control “Buzzer”
.
Change web UI display language
17
LevelOne NVR Series
Network Video Recorder
English
Use
r
’
s Manual
LevelOne
Network Video Recorder
1.1 Retrieve camera’s video stream
The camera list is expanded and
displayed on the Live View page.
.
Click “All” to display videos in the
8-video mode (NVR-0208) or 16-
video mode (NVR-0216)
.
Click on a “Group” (ex. Group 1) to
display videos from cameras under
that group in quad view
.
Click on any camera to display
video in single-view mode
1.2 Retrieve camera’s status
The camera list can show each camera’s current status. Each status is
represented with different colors and their meanings are explained on the
left
Camera is connected
Camera is NOT connected
Camera is current performing recording
18
LevelOne NVR Series
Network Video Recorder
English
Use
r
’
s Manual
LevelOne
Network Video Recorder
1.3 Perform Sequence Viewing
Sequence view is a function that allows you to view multiple video streams
from certain cameras in sequence automatically with having to select them one
by one.
To perform sequence view, select “SEQ View” from the upper-left hand
corner
Next, select one or more camera(s) or camera group(s) for sequence viewing
Then select dwell interval from the drop-down menu
Finally click “Start” to start sequence viewing
* Click “All Channels” to quickly select all available channels and start
sequence view in single-view mode.
Click “All Groups” to quick select all available groups and start sequence
view in quad-view mode
Or simply select the desired channels and press “Start” to start sequence view
The “All Group” button is not available in 4Ch NVR as it only has one group
19
LevelOne NVR Series
Network Video Recorder
Engli
sh
Use
r
’
s Manual
LevelOne
Network Video Recorder
1.4 PTZ Control
PTZ control provides functions to pan, tilt, zoom a PTZ camera as well
as the ability to adjust camera focus and iris
Camera(s) that are currently being selected for live viewing will be listed
in the PTZ drop-down menu. Simply select a camera then use the PTZ
control panel to control the camera
The bar shown below allows you to control the pan/tilt speed
20
LevelOne NVR Series
Network Video Recorder
English
Use
r
’
s Manual
LevelOne
Network Video Recorder
1.5 Perform PTZ Preset Viewing
There are three functions provided in the “Preset” section:
.
Perform preset point viewing of a particular camera
.
Auto pan a particular camera
.
Perform preset point sequence viewing
Preset Point Viewing
Start by selecting a PTZ camera from the drop-down list:
It’s available PTZ preset points will be listed in the drop-down
list shown below:
Select a preset position from the drop-down list and click
“Go to” to move the live view to that position
21
LevelOne NVR Series
Network Video Recorder
English
Use
r
’
s Manual
LevelOne
Network Video Recorder
1.6 Live Video Control Buttons
Each live video window comes with control buttons with functions
described below:
Take a snapshot of a live video
Turn on/off audio of a live video
Start/stop recording of a live video (manual recording)
Audio post function
Full screen view of a live video
Display video in its original ratio
23
LevelOne NVR Series
Network Video Recorder
English
Use
r
’
s Manual
LevelOne
Network Video Recorder
Take a snapshot of a live video
To take a snapshot of a live video, click the button and the
snapshot of the video will be displayed in a pop up window shown like
below
Right-click anywhere on the image and select “Save Image as” from the
pull-down menu
In the pop up dialog, name the image file and choose which directory the
image will be saved to and click “Save”
24
LevelOne NVR Series
Network Video Recorder
English
Use
r
’
s Manual
LevelOne
Network Video Recorder
Full Screen View of a Live Video
To view a video in full screen, click the button. To exit full screen
video, double-click anywhere on the video.
Turn On/Off Audio of a Live Video
You can retrieve audio from a particular camera. Simply click the
button to do so.
The button will show in different color once the audio is turned on.
Click on it again to turn off audio.
You may only turn on audio once channel at a time
Start/Stop Recording of a Live Video
You can manually start or stop recording of a live video by using the
button.
The button will show in different color once the recording is started
manually. Click on it again to stop recording.
Audio post
This function allows user to speak from a PC through a microphone
and the audio can be played at the camera side if it has a speaker
connected to it.
25
LevelOne NVR Series
Network Video Recorder
LevelOne NVR Series
Network Video Recorder
English
Use
r
’
s Manual
LevelOne
Network Video Recorder
1.7 Change Web
UI
Display Language
You can change the web UI display language from the current login
username link located at the upper-right hand corner. Click on the link
opens up a new window which displays detail information about the
user as well as a drop-down menu which lets you change the display
language.
26
LevelOne NVR Series
Network Video Recorder
Specyfikacje produktu
| Marka: | LevelOne |
| Kategoria: | Rejestrator głosu |
| Model: | NVR-0204 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z LevelOne NVR-0204, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Rejestrator głosu LevelOne
14 Sierpnia 2024
Instrukcje Rejestrator głosu
- Rejestrator głosu Sony
- Rejestrator głosu Yamaha
- Rejestrator głosu Motorola
- Rejestrator głosu Philips
- Rejestrator głosu SilverCrest
- Rejestrator głosu Hikvision
- Rejestrator głosu Roland
- Rejestrator głosu Panasonic
- Rejestrator głosu Nedis
- Rejestrator głosu Boss
- Rejestrator głosu Audioline
- Rejestrator głosu Marquant
- Rejestrator głosu Toshiba
- Rejestrator głosu D-Link
- Rejestrator głosu Majestic
- Rejestrator głosu Profoon
- Rejestrator głosu Salora
- Rejestrator głosu Swann
- Rejestrator głosu Kodak
- Rejestrator głosu Digitus
- Rejestrator głosu Dahua Technology
- Rejestrator głosu DataVideo
- Rejestrator głosu Zoom
- Rejestrator głosu Marantz
- Rejestrator głosu Vivotek
- Rejestrator głosu Speco Technologies
- Rejestrator głosu Samson
- Rejestrator głosu Olympus
- Rejestrator głosu GoClever
- Rejestrator głosu AirLive
- Rejestrator głosu Axis
- Rejestrator głosu Sanyo
- Rejestrator głosu Oregon Scientific
- Rejestrator głosu Abus
- Rejestrator głosu Olympia
- Rejestrator głosu Saramonic
- Rejestrator głosu Sangean
- Rejestrator głosu AVerMedia
- Rejestrator głosu RCA
- Rejestrator głosu AJA
- Rejestrator głosu Trevi
- Rejestrator głosu Gefen
- Rejestrator głosu Hanwha
- Rejestrator głosu Lectrosonics
- Rejestrator głosu Blackmagic Design
- Rejestrator głosu Tascam
- Rejestrator głosu Lervia
- Rejestrator głosu Qian
- Rejestrator głosu Atomos
- Rejestrator głosu GPO
- Rejestrator głosu Audiovox
- Rejestrator głosu Konig
- Rejestrator głosu Mpman
- Rejestrator głosu Humax
- Rejestrator głosu Dnt
- Rejestrator głosu Irradio
- Rejestrator głosu Engel Axil
- Rejestrator głosu EverFocus
- Rejestrator głosu M-Audio
- Rejestrator głosu Provision ISR
- Rejestrator głosu Livescribe
- Rejestrator głosu Griffin
- Rejestrator głosu Kguard
- Rejestrator głosu Neo
- Rejestrator głosu Epcom
- Rejestrator głosu Feelworld
- Rejestrator głosu Syscom
- Rejestrator głosu Pixel Maker
- Rejestrator głosu AVTech
- Rejestrator głosu Jammin Pro
- Rejestrator głosu Mach Power
Najnowsze instrukcje dla Rejestrator głosu
4 Marca 2025
15 Stycznia 2025
14 Stycznia 2025
30 Grudnia 2025
29 Grudnia 2024
27 Grudnia 2024
21 Grudnia 2024
15 Grudnia 2024
11 Grudnia 2024
11 Października 2024