Instrukcja obsługi LevelOne IGP-0310

LevelOne inteligentny dom IGP-0310

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla LevelOne IGP-0310 (7 stron) w kategorii inteligentny dom. Ta instrukcja była pomocna dla 23 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/7

IGP-0801

8-Port Industrial Gigabit Ethernet PoE Switch,

4 PoE Outputs, 802.3at PoE+, 6W 12

User Manual

FCC MARKING

This Equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference

in which case the user will be required to correct the interference at his own expense.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2)

this device must accept any interference received; including interference that may

cause undesired operation.

CE MARKING

This equipment complies with the requirements relating to electromagnetic

compatibility, EN 55022 class for ITE, the essential protection requirement of A

Council Directive 2004/108/EC on the approximation of the laws of the Member States

relating to electromagnetic compatibility.

Company has an on-going policy of upgrading its products and it may be possible that

information in this document is not up- -date. Please check with your local to

distributors for the latest information. No part of this document can be copied or

reproduced in any form without written consent from the company.

Trademarks:

All trade names and trademarks are the properties of their respective companies.

Power connection:

This industrial Fast Ethernet 8 port POE switch is equipped with 4 x 10/100/1000M PSE port, each port can

deliver 30W POE power. It comes with a 6 pin terminal block. It can be connected with 48-56VDC power

source. Always Make sure to use 56VDC for IEEE802.3at or 30W power connection.

WARNING any exceeded input voltage will not make this unit function and may damage this unit. –

To make power connection Follow the printed polarity for V1+, V1-, –

V2+, -, and ground. Connect positive wire to V+ , connect negative V2

wire to V-, also connect neutral wire to the ground screw as shown .

Relay You may use 24V@1A relay connection to your external --

device for special purpose. When 2 powers are connected, the relay is

in OPEN mode. When any power source fails, the relay change to

SHORT status.

Power connecting procedure:

STEP 1 Pull out 6 pin terminal block–.

STEP 2 Connect wire to V1+, V1-, or V2+, V2-, and Ground the neutral wire to the ground screw. –

STEP 3 Plug back 6 pin terminal block to its place. –

WARNING –

Always ground the power source to maintain a clean power input. Due to too many cheap made power

supplies, it creates too much noise, and it will cause the power input uctuates when connect to this

unit. To avoid this, always ground the power source to gain a clean power input.

Din Rail Bracket x 1

Wall mount bracket x 2

6 pin Terminal Block p3

Installation package:

This unit can be installed by din-rail mounted or wall-mounted. Din-rail brackets and wall-mounted

bracket are included.

Specyfikacje produktu

Marka:	LevelOne
Kategoria:	inteligentny dom
Model:	IGP-0310
Kolor produktu:	Czarny
Materiał obudowy:	Metal
Wysokość produktu:	101 mm
Szerokość produktu:	65 mm
Głębokość produktu:	35 mm
Waga produktu:	300 g
Szerokość opakowania:	110 mm
Wysokość opakowania:	130 mm
Głębokość opakowania:	62 mm
Certyfikaty:	CE/FCC
Kraj pochodzenia:	Chiny
Standardy komunikacyjne:	IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Pełny dupleks:	Tak
Prędkość transferu danych przez Ethernet LAN:	1000 Mbit/s
Obsługa PoE:	Tak
Zakres temperatur (eksploatacja):	-40 - 75 °C
Zakres wilgotności względnej:	0 - 95 %
Skrócona instrukcja obsługi:	Tak
Kod zharmonizowanego systemu (HS):	85176990
Pobór mocy:	5 W
Waga wraz z opakowaniem:	350 g
Diody LED:	Link
Zakres temperatur (przechowywanie):	-40 - 85 °C
Dopuszczalna wilgotność względna:	0 - 95 %
Stopień ochrony IP:	IP30
Możliwości montowania w stelażu:	Nie
Podstawowe przełączanie RJ-45 Liczba portów Ethernet:	2
Podstawowe przełączania Ethernet RJ-45 porty typ:	Gigabit Ethernet (10/100/1000)
Obsługa 10G:	Nie
Wielkość tabeli adresów:	- wejścia
Przepustowość rutowania/przełączania:	- Gbit/s
Produkt stackowalny:	Nie
Montaż naścienny / rzutowanie na sufit:	Tak
Zasilacz dołączony:	Nie
Automatyczne MDI/MDI-X:	Tak
Napięcie wejściowe DC:	12 - 56 V
Półdupleks:	Tak
Auto-Negocjacja:	Tak
Ochrona przed nagłym wzrostem napięcia:	Tak
Pamięci bufora pakietów:	1 MB
Ilość slotów Modułu SFP:	1