Instrukcja obsługi LevelOne IFS-0503


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla LevelOne IFS-0503 (2 stron) w kategorii przełącznik. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
5-
Port
1 Por
Quick
IFS-0503
Fast Ethernet Industrial Switch,
rt SC Single
-Mode Fiber, 30km
k Installation Guid
de

IFS-0503 Page 1
Overview
The LevelOne IFS-0503 Industrial Fast Ethernet Switch
provides four ports at 10/100M TX and one single-mode fiber
port at 100M FX SC to enable high speed networks in mission-
critical environments. With an industrial standard DIN-rail
mount, this switch can be installed in a cabinet, and clearly
visible status LEDs provide simple monitoring of port link
activity. The single-mode fiber port allows for large-scale
connections of up to 30km. The switch is housed in a solid
metal case rated at IP30, keeping it safe from dust, vibration,
heat and humidity, while an operational temperature range of -
40°C to +7C makes it suitable for deployment in a lmost any
environment.
High Reliability
All components are built to withstand harsh environment
applications without compromise where humidity, temperature
variation and even shock vibration are concerns, including
Electric & Utility, Critical Infrastructure, Transportation and
Surveillance Security. This device operates under -40 to 75
Celsius (-40 to 167 Fahrenheit) temperature.
Plug & Play
This unmanaged Industrial Ethernet Switch is designed for the
demanding industrial environments at businesses in need of
instant connectivity with no setup or configure required, truly
plug and play.
IFS-0503 Page 2
Features
Meets NEMA TS1/TS2 Environmental requirements such as temperature,
shock, and vibration for traffic control equipment
Meets EN61000-6-2 & EN61000-6-4 EMC Generic Standard Immunity for
industrial environment
Supports 1024 MAC addresses. Provides 1M bits memory buffer
Provides one Port SC Single-Mode Fiber with a maximum networking
range of 30km.
Store-and-forward mechanism. Full wire-speed forwarding rate.
Power Supply: 9~56VDC Terminal Block power input.
3.76W power consumption 48VDC full load
-40 to 75 (-40 to 167 ) operating temperature range. ℃ ℉
Tested for functional operation @ -40 to 85 (-40 to 185 ). ℃ ℉
Metal case design and compliant with IP30 standard
Package Contents
IFS-0503
Din rail*1, wall mount*2, terminal block*1, screw*4
Quick Installation Guide
IFS-0503 Page 3
LED Status
Status
Description
PWR 1, 2
ON Power On
OFF Power Off
SW (relay) ON both PW1 and PW2 are connected
OFF only PW1 or PW2 is connected
10/100
/
Base
-
TX
LNK(1 ~ 4)
ON TX link is detected
OFF TX port is not detected
Flashing TX port is active
Fiber
F5
ON FX fiber is detected
OFF FX fiber is not detected
Flashing FX fiber is active
IFS-0503 Page 4
Power Input
Terminal Block
PW1
+
44–56VDC
Power Ground
PW2
+
44–56VDC
Power Ground
Relay Output 1A @ 24VDC
IFS-0503 Page 5
DIN Rail Mount
Assembly: Place the switch on the DIN rail from above using
the slot. Push the front of the switch toward the mounting
surface until it audibly snaps into place
Start-up: Connect the supply voltage to start up the switch
via the terminal block (or DC JACK)
Dismantling: Pull out the lower edge and then remove the
switch from the DIN rail.
IFS-0503 Page 6
10/100Base-TX Connector
The following lists the pin-out of 10/100Base-TX ports.
Pin
Standard Port
Uplink Port
1 Output Transmit Data + Input Receive Data +
2 Output Transmit Data - Input Receive Data -
3 Input Receive Data + Output Transmit Data +
4 NC NC
5 NC NC
6 Input Receive Data - Output Transmit Data -
7 NC NC
8 NC NC


Specyfikacje produktu

Marka: LevelOne
Kategoria: przełącznik
Model: IFS-0503

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z LevelOne IFS-0503, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje przełącznik LevelOne

Instrukcje przełącznik

Najnowsze instrukcje dla przełącznik

INOGENI

INOGENI CAM230 Instrukcja

14 Stycznia 2025
Luxul

Luxul XMS-5248P Instrukcja

14 Stycznia 2025
Luxul

Luxul AMS-2624P Instrukcja

14 Stycznia 2025
Luxul

Luxul XGS-1005 Instrukcja

14 Stycznia 2025
Luxul

Luxul AGS-1008M Instrukcja

14 Stycznia 2025
Luxul

Luxul XMS-1208P Instrukcja

14 Stycznia 2025
Luxul

Luxul XMS-7048P Instrukcja

14 Stycznia 2025
Luxul

Luxul AMS-2600 Instrukcja

14 Stycznia 2025