Instrukcja obsługi LevelOne GEP-2841

LevelOne Schakelaar GEP-2841

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla LevelOne GEP-2841 (28 stron) w kategorii Schakelaar. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/28
Web Management Guide
( GEP- 2841 )
Chapter Product Introduction
Product introduction
The LevelOne GEP-2841 Web Smart Gigabit PoE Switch, provides 24 PoE ports
10/100/1000Base-T plus 2 port Gigabit Uplink SFP and 2 port Gigabit Uplink RJ45 to
enable high speed network. With the plus the clearly visible status LEDs provide simple
monitoring of port link activity. Moreover, the SFP slots support pluggable modules that
enabling you to choose from a variety of transceivers. It offers powerful enhanced PoE
functionality and a total PoE budget of 375W. and it is fully complied with
IEEE802.3af/at/bt PoE standard at maximum 90W(1-2 port) power budget. supports up
to 30W output power per PoE port, giving you power distribution flexibility for a wide
range of PoE PD devices. It helps to save infrastructure wiring costs dramatically by
eliminating electric wiring and less UPS needed.
F ront interface
Figure 1-3
Definition of operating mode switch!
Mark
Work mode
Description
Unmanaged
Unmanaged
mode
All ports communicate freely, and the parameters
configured in Web mode do not take effect
Web Smart
WEB managed
mode
The web network management function is
effective, and the switch can be managed and
configured
Indicator!
Figure 0-4
S/N
Indicator
Status
P ower
Light on
Light off
PoE
Light on
Light off
1000M
Light on
Light off
Link/Act
Light on
Light flash
Light off
List of accessories
l Master unit
l Power cord
l Quick Installation Guide
l L- shaped bracket and other
l Rubber Feet
Installation guide
For the safe installation and operation of the switch, it is recommended that you!
1. Check that the power cord is securely wrapped around the AC power connector"
2. Ensure proper heat dissipation and ventilation around the switch"
3. Do not stack heavy objects on the switch"
Mounting to rack
1. Check the grounding and stability of the frame"
2. L-Install the two shaped brackets in the accessories on both sides of the switch panel
and fix them with the screws provided in the accessories, as shown in Figure 2-1 "
3. Place the switch in the appropriate position in the rack and supported by the bracket"
Fix the L-shaped bracket on the guide grooves fixed at both ends of the rack with screws
to ensure that the switch is stably and horizontally installed on the machine, as shown in

Specyfikacje produktu

Marka: LevelOne
Kategoria: Schakelaar
Model: GEP-2841

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z LevelOne GEP-2841, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Schakelaar LevelOne

Instrukcje Schakelaar

Najnowsze instrukcje dla Schakelaar

ATen

ATen CE610-AT-E Instrukcja

19 Września 2024
ATen

ATen KA7240S Instrukcja

19 Września 2024
Lindy

Lindy 38155 Instrukcja

19 Września 2024
ATen

ATen VS0801H Instrukcja

19 Września 2024
OSD Audio

OSD Audio SSVC4 Instrukcja

18 Września 2024
ATen

ATen CS1794 Instrukcja

18 Września 2024
ATen

ATen VM51616H Instrukcja

18 Września 2024