Instrukcja obsługi Lenco iPT-22 DVD

Lenco Inne akcesoria komputerowe iPT-22 DVD

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Lenco iPT-22 DVD (30 stron) w kategorii Inne akcesoria komputerowe. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/30
0 1
INSTRUCTION MANUAL
DVD/CD PLAYER
WITH iPod/iPhone DOCKING &
SD/MMC CARD READER
WITH PLL FM STEREO RADIO AND 3D SOUND
MODEL: IPT-223
Please read following instructions prior to operating your unit.
Manufacturer of this unit follows a principle of continuous improvement and has no responsibility for any
changes that are made to the unit nor any liability for these changes. Thanks for your choice of our
products.
For information and support, www.lenco.eu
1
2
3
4
5
6
7
8
10 9
26
27 18
2 3
MAIN UNIT
1. PREV/TUNE- BUTTON
2. STOP BUTTON
3. iPod/iPhone DOCKING
4. NEXT/TUNE+ BUTTON
5. PLAY/PAUSE BUTTON
6. VOLUME CONTROLLER
7. REMOTE SENSOR
8. MEM BUTTON
9. CH+ BUTTON
10. CH- BUTTON
11. TONE BUTTON
12. LCD DISPLAY
13. STANDBY BUTTON
14. FUNCTION BUTTON
15. EJECT BUTTON
16. SLEEP BUTTON
17. SD/MMC CARD SLOT
18. SCART OUTPUT SOCKET
19. FM PIGTAIL ANTENNA
20. RIGHT AUX IN JACK
21. LEFT AUX IN JACK
22. VIDEO OUT JACK
23. POWER ON/OFF BUTTON
24. AC SOCKET
25. STAND FEET
26. DISC TRAY
27. HDMI SOCKET
REMOTE CONTROL
1. STANDBY BUTTON
2. SETUP BUTTON
3. FUNCTION BUTTON
4. MENU BUTTON
5. INFO BUTTON
6. PREVIOUS BUTTON
7. NAVIGATION UP & CH+ BUTTON
8. NAVIGATION LEFT & TUNE- BUTTON
9. NAVIGATION DOWN & CH- BUTTON
10. STOP BUTTON
11. VOL + BUTTON
12. TREBLE +/- BUTTON
13. VOL- BUTTON
14. NUMERIC BUTTONS
15. MEM/SUBTITLE BUTTON
16. ST/MO & AUDIO BUTTON
17. MUTE BUTTON
18. EJECT BUTTON
19. TITLE BUTTON
20. SLEEP BUTTON
21. NEXT BUTTON
22. NAVIGATION RIGHT & TUNE+ BUTTON
23. ENTER BUTTON
24. PLAY/PAUSE BUTTON
25. BASS +/- BUTTON
26. FAST BACKWARD BUTTON
27. FAST FORWARD BUTTON
28. REP BUTTON
29. GOTO BUTTON
30. A-B BUTTON
31. PROG BUTTON
32. ZOOM BUTTON
33. ANGLE BUTTON
CONNECT DVD PLAYER TO OTHER APPLIANCES
It is recommended you connect the player to a multi-system TV.
Ensure that this player and other appliances (TV set and amplifier) that will be connected to the player
are set to OFF mode and that the AC cords are disconnected from the wall outlet.
Avoid blocking ventilation holes of the connected appliances and make sure air around there can
circulate freely.
Read carefully and follow the instructions before connecting other appliances.
HDMI SCART OUTPUT
VIDEO OUT
AUDIO R AUDIO L VIDEO IN
HDMI
AV AUDIO/VIDEO INPUT
SCART
After connection is firmly and securely done, plug AC power cord to an applicable wall outlet and turn on
the player.
SCART VIDEO OUTPUT SOCKET
The SCART OUTPUT SOCKET is for the video and audio signals to be produced in high quality and
fidelity between video devices. Please notice that the player with SCART socket will have to be
connected to a TV set with the same SCART socket for reproduction of video and audio signals.
Note: The SCART VIDEO OUTPUT SOCKET works at DVD mode only.
HDMI OUTPUT SOCKET
The HDMI OUTPUT SOCKET is supplied at the rear of the unit for you enjoy photos or videos on high
resolution. Plug the HDMI cable (optional) to the unit and the TV set with the HDMI socket as the above
illustration for the high resolution photo/video output.
Note: The HDMI OUTPUT SOCKET works at DVD mode only.
VIDEO OUTPUT
There is a video output jack on the rear of the unit, so that you could make the video output to a TV set
or other appliance with video input jack for enjoying video. To output the video, connect one end of the
video cable to the video output jack of the unit, the other end to the video input jack of the appliance.
POWER SUPPLY
Plug one end of the AC cord into the AC socket on the unit, then plug the other end into the AC wall
outlet.
NOTE: During playback, if not any operation in 6 hours, the unit will switch to standby mode
automatically.
VIDEO cable
HDMI cable
(optional) SCART cable
(optional)
TV set
1
2
3
4
5
6
7
8
9
10
14
15
16
11
12
13
17
18
19
20
21
22
23
24
2
5
26
27
28
29
30
31
32
33
STANDBY
FUNCTION SETUP MUTE EJECT
INFO MENU TITLE SLEEP
CH+
BASS
CH-
TUNE+
1 2 3
4 5 6
789
MEM
GOTO A-B
ST/MO
PROG
ENTER
TUNE
-
TREBLE VOL
REP
0
AUDIO ANGLE ZOOM
4 5
SLEEP FUNCTION
Press SLEEP button at power on mode. Each time SLEEP button is pressed, the display changes
Sleep time in a sequence as follows:
90 80 70 60 50 40 30 10 20 OFF
When the sleep time is expired, the unit will switch off automatically.
iPod/iPhone OPERATING
PLAYING AN iPod/iPhone
1. Dock an iPod/iPhone onto the unit.
2. Press the POWER ON/OFF button on the rear of the unit and press STANDBY button to turn the unit
on.
3. Press the FUNCTION button continuously to toggle the unit to IPOD mode.
4. Press PLAY/PAUSE button to play and pause the docked iPod/iPhone.
5. During normal playback, Press PREVIOUS/NEXT button to skip the tracks ahead or backward.
Press and hold FAST FORWARD or FAST BACKWARD button on the remote to search through the
current track forward or backward at a high speed.
6. Press MENU button on the remote to return back the menu the inserted iPod/iPhone, use navigation
up/down button to select your desired track for playback, confirm your selection by pressing ENTER
button.
7. Use STOP button to cease the iPod/iPhone playback.
NOTE: During playback, the connected iPod/iPhone may skip to another song accidently. Once the
problem occurs, please change the shake from “on” to “off” inside Settings of iPod/iPhone.
FM RADIO
TUNING THE FM RADIO
1. Press the POWER ON/OFF button on the rear of the unit and press STANDBY button to turn the unit
on.
2. Press FUNCTION button to switch the unit to radio mode (the radio frequency shows on the LCD
display).
3. Press PREV/NEXT button on the main unit or TUNE+/- button on the remote to fine tune the radio
station. Press and hold PREV/NEXT button on the unit or TUNE-/+ button on the remote to
automatically tune the radio frequency backward and forward respectively. When the tuning goes to
one available station, broadcasting starts immediately.
4. Press ST/MO button on the remote to switch the radio between FM(MONO) and FM(ST).
5. If the unit broadcast a program with RDS, the RDS icon will be shown on the LCD display. Press
INFO button on the remote to check the frequency of the current station.
SAVING FM RADIO STATIONS TO THE UNIT'S MEMORY
1. After tuning the FM radio to the desired stations, press MEM button, "MEM" is shown on the LCD
display with a flashing number of a memory cell.
2. Press CH+/ CH- button to select the radio memory cell.
3. Press MEM button again to save the current radio station to the selected memory cell.
4. To recall the preset station frequency, press CH+ or CH- button repeatedly.
TONE SETTING FOR THE UNIT
During playback, press TONE button once, and use VOLUME CONTROLLER on the unit to adjust the
bass. Press TONE button twice repeatedly for adjusting treble effect by rotating VOLUME
CONTROLLER on the unit as adjust bass effect. Press the TONE button thrice to resume the previous
display.
The bass and treble effect also can be adjusted by pressing BASS+/- button and TREBLE+/- button on
the remote.
MUTE THE UNIT
During playback, press MUTE button to switch off the audio. Press the button again to resume the
audio.
AUX IN
Your player can be used as a power amplifier to playback the programs from portable radio, TV set or
MP3 player or whatever provided this appliance is so designed that audio signal may be produced
through a LINE-OUT jack or the like.
Observe the following steps to connect the player to another appliance:
1. Connect the appliance into the player's left & right AUX IN jacks with the LINE OUT cables.
2. Press STANDBY button to turn the unit on.
3. Press FUNCTION button repeatedly to switch the unit to AUX mode.
4. Power on the appliance and begin play.
At this time, you will be able to hear the sound produced from the connected appliance.
3D FUNCTION
In case the speaker cut off on the chipset protection, please turn OFF and ON as reset to resume the
3D function.
DVD OPERATIONS
PREPARATION
Power on the TV set and select video input mode.
Power on the audio system which is connected to the player.
GET STARTED
1. Press the POWER on/off button on the rear of the unit and then press STANDBY button to turn on the
player.
2. Press FUNCTION button repeatedly to switch to DISC mode. Press EJECT key to open the disc tray.
3. Place a disc onto the disc tray.
4. Close the disc tray by pressing the EJECT button again and the playback starts automatically.
5. When a menu screen appears on the TV, press the navigation buttons or press the numeric buttons
to select a preferred track number, then press ENTER button on the remote or PLAY/PAUSE button
on the unit to start playback.
ADJUST THE VOLUME
Adjust the volume output by pressing the VOL+/- button on the remote or rotating the VOLUME
CONTROLLER on the unit.
SKIP AHEAD OR BACK
Press PREVIOUS button during play to skip to previous chapter (DVD) or track (CD), Press NEXT
button during play to skip to next chapter (DVD) or track (CD).
RAPID ADVANCE/REVERSE
During playback, press FAST FORWARD/FAST BACKWARD button on the remote continuously to
scan the disc forward or backward at X2, X4, X8, X20 normal speed.
Press PLAY/PAUSE button to resume normal play.
STOP PLAYBACK
Press STOP button during playback to stop playback; the player activates its resume function when
STOP is pressed in STOP mode; press PLAY/PAUSE button again, playback resumes at the point it
stopped previously; open the disc tray or press the STOP button one more time to clear the resume
function.

Specyfikacje produktu

Marka: Lenco
Kategoria: Inne akcesoria komputerowe
Model: iPT-22 DVD

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Lenco iPT-22 DVD, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Inne akcesoria komputerowe Lenco

Lenco

Lenco IPT-223 Instrukcja

13 Października 2024
Lenco

Lenco Speakerball iPod Instrukcja

27 Sierpnia 2024
Lenco

Lenco iPT-22 DVD Instrukcja

22 Sierpnia 2024

Instrukcje Inne akcesoria komputerowe

Najnowsze instrukcje dla Inne akcesoria komputerowe

Dell

Dell WD19DC Instrukcja

14 Października 2024
Origin Storage

Origin Storage OSDOCK-MMUSBCA Instrukcja

9 Października 2024
Origin Storage

Origin Storage OSDOCK-USBC Instrukcja

9 Października 2024
Origin Storage

Origin Storage OSDOCK-USB3 Instrukcja

9 Października 2024
Goobay

Goobay 62106 Instrukcja

9 Października 2024
Goobay

Goobay 45835 Instrukcja

9 Października 2024
Goobay

Goobay 66255 Instrukcja

9 Października 2024
Urban Factory

Urban Factory TCD01UF Instrukcja

9 Października 2024
Kensington

Kensington SD1700P Instrukcja

9 Października 2024
Kensington

Kensington SD5500T Instrukcja

9 Października 2024