Instrukcja obsługi Lectrosonics M2T-X


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Lectrosonics M2T-X (24 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/24
M2T
Digital IEM Transmitter
INSTRUCTION MANUAL
Rio Rancho, NM, USA
www.lectrosonics.com
Fill in for your records:
Serial Number:
Purchase Date:
M2T, M2T/E01
M2T, M2T/E01 ND (non Dante)
M2T/E01 - B1C1
M2T/E02
M2T/E06
Dante® is a trademark of Audinate Pty Ltd.
M2T, M2TND, M2T/E01, M2TND/E01, M2T/E02, M2T/E06
LECTROSONICS, INC.
2
Digital IEM Transmitter
Rio Rancho, NM
3
Table of Contents
Introduction 4 ............................................................................
What is Dante? 4 ....................................................................
System Setup Procedures 5 ....................................................
Summary of Steps 5 ..............................................................
Panels and Features 6 ..............................................................
M2T, M2T/E01, M2T/E02, M2T/E06 Front Panel 6 ...............
M2T, M2T/E01, M2T/E02, M2T/E06 Back Panel 6 ................
Operating Instructions 7 .......................................................
IR (infrared) Port 7 ..................................................................
USB Port 7 .............................................................................
Headphone Volume Adjustment......................................... 7
Dante Ports (optional) 7 .........................................................
Ethernet Port 7 .......................................................................
Power Inlet 7 ..........................................................................
Quick Sync 7 ..........................................................................
Navigating the Menus 7 .........................................................
LCD Menu Map 8 ......................................................................
Menu Item Descriptions 9 ........................................................
RF Setup 9 .............................................................................
RF Enable/Level 9 ...............................................................
Frequency 9 ........................................................................
Sync Scan 9 ........................................................................
Audio Setup 10 ........................................................................
Audio Level/Trim (Audio Input Gain) 10 ...............................
Audio Input Type 10 ..............................................................
Audio Polarity 10 ...................................................................
Headphone Monitor 10 .........................................................
IR Sync 10 ................................................................................
Sync Settings 10 ...................................................................
Sync Flexlist Profile 10 .........................................................
System Settings 10 ..................................................................
Front Panel Setup 10 ............................................................
Network Settings 10 .............................................................
Edit Names 10 .......................................................................
Restore Defaults 11 ..............................................................
About 11 ................................................................................
Accessories 12 ...........................................................................
Hardware Installation 13 ............................................................
Unpacking the Unit 13 .............................................................
Items Included in the Box: 13 ..................................................
Installing two M2T, M2T/E01, M2T/E02, M2T/E06
Transmitters into a Single Rack Space 14 .............................
Installing One M2T into a Single Rack 16 ...............................
Installing One DSQD into a Single Rack 16 ............................
Mounting M2T to DSQD 18 .....................................................
Wireless Designer Software 20 ................................................
Firmware Update Instructions.............................................. 20
Specifications and Features 20 ...............................................
Service and Repair 21 ................................................................
Returning Units for Repair 21 ..................................................


Specyfikacje produktu

Marka: Lectrosonics
Kategoria: Nie skategoryzowane
Model: M2T-X

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Lectrosonics M2T-X, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Nie skategoryzowane Lectrosonics

Instrukcje Nie skategoryzowane

Najnowsze instrukcje dla Nie skategoryzowane