Instrukcja obsługi Lectrosonics M2Ra-A1B1


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Lectrosonics M2Ra-A1B1 (20 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/20
M2Ra
Digital IEM/IFB Receiver
M2Ra-A1B1, M2Ra-B1C1
INSTRUCTION MANUAL
Rio Rancho, NM, USA
www.lectrosonics.com
Fill in for your records:
Serial Number:
Purchase Date:
Quick Start Summary
1) Install receiver batteries (pg. 7).
2) Power unit on with On/O and
Volume knob (pg. 11).
3) Scan for an available frequency
(pg.11).
4) Sync the receiver with a transmitter
(pg. 11).
5) Enable RF in transmitter (see
transmitter manual).
6) Send audio (pg. 11).
WARNING: Moisture, including talent’s
sweat, will damage the receiver. Use our
silicone cover (order part # M2RCVR) or other
protection to avoid damage.
M2Ra
LECTROSONICS, INC.2
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, my cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Digital IEM Receiver
Rio Rancho, NM 3
Table of Contents
Quick Start Summary 1 ........................................................
M2Ra Digital IEM Receiver 4 ...............................................
FlexList 4 ..........................................................................
Smart Tuning (SmartTune) 4 ..............................................
RF Front-End with Tracking Filter 4 ....................................
Encryption 4 .........................................................................
Panels and Features 5 .........................................................
Battery Status LED 6 ...........................................................
RF Link LED 6 ......................................................................
On/Off and Volume Knob 6 ..................................................
IR (infrared) Port 6 ................................................................
USB Port 6 ...........................................................................
Battery Compartment 6 .......................................................
Keypad and LCD Interface 6 ...............................................
Installing Batteries 7 ............................................................
LCD Main Window 7 ............................................................
System Setup Procedure 8 ..................................................
Navigating the Menus 9 .......................................................
M2Ra LCD Menu Map 10 ......................................................
Menu Item Descriptions 12 ...................................................
Supplied and Optional Accessories 16 .................................
Specifications 17 ...................................................................
Wireless Designer Software.............................................. 17
Firmware Update Instructions.......................................... 17
Service and Repair 18 ...........................................................
Returning Units for Repair 18 ................................................


Specyfikacje produktu

Marka: Lectrosonics
Kategoria: Nie skategoryzowane
Model: M2Ra-A1B1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Lectrosonics M2Ra-A1B1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Nie skategoryzowane Lectrosonics

Instrukcje Nie skategoryzowane

Najnowsze instrukcje dla Nie skategoryzowane