Instrukcja obsługi LC-Power LC-DOCK-U3-III

LC-Power Kołyska/stacja dokująca LC-DOCK-U3-III

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla LC-Power LC-DOCK-U3-III (4 stron) w kategorii Kołyska/stacja dokująca. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
Installation guide
LC-DOCK-U3-III - USB 3.0 Dual Bay Docking Station for 2x 2,5”/3,5” SATA HDDs/SSDs
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
1. Included in delivery
● USB 3.0 dual bay docking station
● USB 3.0 cable
● Power adapter
● Installation guide
3. Information – please read carefully before using the product
We strongly advise that you make a backup of your original data before commencing the cloning process
to avoid any data loss in case of a power failure during the cloning process. LC-Power cannot accept the
responsibility for the loss of data or the misuse of the device. Please also check the content of the
package before commencing with the use of the device.
Minimum system requirements
- Intel Pentium II 50MHz compatible or Mac G3 processor or higher
- Microsoft Windows 2000/XP/Vista/7/8/10, Mac OS 9.1, 9.2, 10.1.5, 10.2, 10.3 or higher
- Computer supporting USB 3.0
Page 1
Product overview
1. Hardware clone button
3. HDD B bay (Target drive bay)
5. Cloning status LEDs
7. Power socket (input DC 12V/2,5A)
2. Main features
Supports 2,5” & 3,5” SATA HDDs/SSDs
2,5” up to 6TB, 3,5” up to 16TB
Supports hardware cloning
USB 3.0 output interface
Easy installation, plug & play and
hot- swappable
Including LED indicator for working status
2. HDD A bay (Source drive bay)
4. HDD A & B LEDs
6. USB 3.0 port
8. Power switch
Installation guide
LC-DOCK-U3-III - USB 3.0 Dual Bay Docking Station for 2x 2,5”/3,5” SATA HDDs/SSDs
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
4. Formatting a hard disk drive
If you are using new/unformatted hard disk drives, you will first need to format and partition the drives
before your operating system will recognize them. Please refer to the documentation included with your
hard disk drive and/or operating system for more information about correctly formatting a hard drive.
5. Docking station operation
The dual bay docking station primarily functions as a 2-bay docking station that allows you to easily
connect up to two hard disk drives to your computer through a single USB 3.0 connection.
1. Before your power on and use the docking station, please insert your SATA hard disk drive(s) into the
HDD A bay and/or HDD B bay. Be sure that the hard disk drives’ SATA connectors align with the SATA
connectors inside the HDD bays.
2. Use the provided USB 3.0 cable to connect the docking station with a USB port on your computer.
3. Press the power button located on the rear side of the docking station. The LED indicator will light up
and the hard disk drives will be powered up.
4. Your computer will automatically detect the newly connected device and drives. It may need one to
two minutes to install the necessary drivers. The docking station uses drivers that are already built
into your operating system. Additional drivers are not required.
5. Once the computer has recognized the drives, they will show up under “Computer” (Windows) or on
your desktop (Mac OS X).
No
d
a
ta!
6. Hardware clone function (hard disk drive duplication)
To successfully use the clone function, the capacity of the target hard disk drive must be equal to or larger
than the capacity of the source hard disk drive. Please note that data cannot be cloned to a hard disk
drive with a smaller capacity than the original source hard disk drive.
Hardware clone mode
Please use the one button cloning feature (from source hard disk drive to target hard disk drive) without
connecting the docking station to a computer.
Page 2
Installation guide
LC-DOCK-U3-III - USB 3.0 Dual Bay Docking Station for 2x 2,5”/3,5” SATA HDDs/SSDs
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
Importan
t
no
t
e
:
1. Before cloning a hard disk drive, please d the USB 3.0
cabl
e
from the docking station. If the mentioned cable is connected during the cloning process, i
d
r
i
v
e
s.
2. Please make sure you put the correct hard disk drive into the correct HDD bay before cloning.
Ot
3.
The capacity of the target hard disk drive (must be put in the target HDD bay) must be equal or
larger than the capacity of the source hard disk drive.
Please follow the steps below to enable the hardware clone process:
1. Install two hard disk drives into the dock. Make sure the correct drives are properly installed to source
bay (HDD A) and target bay (HDD B).
2. Remove the USB cable from the docking station, connect the power adapter and press the power
button to power on the docking station.
3. Press and hold the button for to start the duplication. The percentage LED CLONE 3 seconds
indicators located next to the “Clone” button will begin to blink. If you do not hold the clone button for
3 seconds, you need to start the process again.
4. As the duplication process progresses, the LED indicator will blink regarding the cloning status
(25%, 50%, 75%, 100%).
5. When the duplication process has completed, the percentage LED indicator will lighted continuously.
Page 3

Specyfikacje produktu

Marka: LC-Power
Kategoria: Kołyska/stacja dokująca
Model: LC-DOCK-U3-III

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z LC-Power LC-DOCK-U3-III, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Kołyska/stacja dokująca LC-Power

LC-Power

LC-Power LC-DOCK-U3-III Instrukcja

11 Września 2024

Instrukcje Kołyska/stacja dokująca

Najnowsze instrukcje dla Kołyska/stacja dokująca

Vorago

Vorago KSP-600 Instrukcja

9 Października 2024
Gembird

Gembird DD-U3M2 Instrukcja

9 Października 2024
Urban Factory

Urban Factory HCS02UF Instrukcja

9 Października 2024
Urban Factory

Urban Factory HCS01UF Instrukcja

9 Października 2024
Urban Factory

Urban Factory HCS04UF Instrukcja

9 Października 2024
Urban Factory

Urban Factory HCS03UF Instrukcja

9 Października 2024
Bose

Bose SoundLink Flex 2nd Gen Instrukcja

9 Października 2024
StarTech.com

StarTech.com UNIDOCK3UEU Instrukcja

9 Października 2024
StarTech.com

StarTech.com SATDOCKU2EGB Instrukcja

9 Października 2024
StarTech.com

StarTech.com SATDOCKU3FGB Instrukcja

9 Października 2024