Instrukcja obsługi Lasko AR122

Lasko Podgrzewacz AR122

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Lasko AR122 (8 stron) w kategorii Podgrzewacz. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
Rev.B 10/23 AR122ES1
Used for Model:
AR122
READ AND SAVE THESE INSTRUCTIONS
Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself
and others by observing all safety information. Failure to comply with instructions could result in personal injury
and/or property damage!
This heater is for residential use only. It is not intended to be used in commercial, industrial
or agricultural settings.
Have a Question? Need a Part?
Please Do Not Return Product to Store!
Chat with us at www.lasko.com Monday-Friday 8am - 9pm EST
(Valid in U.S. and Canada only)
(Model AR122)
Smart Ceramic
Tower Heater
Instruction Manual
Register Your Product Today
You will benet from:
• Efcient and enhanced support
• Future product updates
Pair with Aria™ for Home App
for remote control and
advanced features
Rev.B 10/23 AR122ES2
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, these instructions and warnings should always be
followed to reduce the risk of re, electrical shock, injury to persons and hyperthermia:
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR PERSONAL INJURY, ALWAYS FOLLOW
THESE IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS:
Plug heaters directly into a 120v wall outlet/receptacle only. Never use with an extension cord. Do not plug heater into any other cord. Plug
heaters directly into a 120v wall outlet/receptacle only. Never use with an extension cord. Do not plug heater into any other cord connected
device, such as a power strip, surge protector, multiple outlet adapter, cord reel or outlet-type air freshener. The use of such devices may create a
re hazard. Do not plug multiple devices in the same outlet or on same circuit as heater.
Faulty wall outlet connections may cause the wall outlet to overheat. Be sure that heater plug ts tightly into outlet before each use. During use,
check to make certain the heater plug is not overheating. If necessary have a qualied electrician check and/or replace the wall outlet. Do not use
this heater with any solid state speed control devices.
Make certain that the power source conforms to the electrical requirements of the heater.
Extreme caution is necessary when any heater is used by or near children or invalids. The heater should not be left operating unattended. Never
leave children unattended when the heater is on or plugged in.
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to t in a
polarized outlet only one way. If the plug does not t fully in the outlet, reverse the plug. If it still does not t, contact a qualied electrician. Do not
attempt to defeat this safety feature.
Do not use the heater in areas where gasoline, paint, or ammable liquids are used or stored. Do not use heater in locations where ammable or
explosive chemicals are stored, or in wet atmospheres.
Do not operate any heater with a damaged cord or plug or after the heater malfunctions, or has been dropped or damaged in any manner. To
disconnect heater, turn the heater off then remove the plug from the outlet.
Always unplug heater when not in use. Unplug power cord before servicing or moving the heater.
Do not insert or allow ngers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock, re, or damage the
heater. Do not block or tamper with the heater in any manner while it is in operation.
Do not block air intakes or exhaust in any manner. Do not place on soft surfaces, like a bed, where openings may become blocked. Do not
depend on the on/off switch as the sole means of disconnecting power when servicing or moving the heater. Always unplug the power cord.
Hyperthermia can result in death. Symptoms of hyperthermia include high body temperature, headache, nausea, vomiting, tiredness, dizziness,
fainting, and rapid pulse. If you begin to experience symptoms related to hyperthermia, turn off the heater and seek medical attention.
To avoid excessive room temperatures which can cause hyperthermia: DO NOT leave product running unattended in a conned space around
infants, or individuals with reducedphysical, sensory, or mental capabilities.
WARNING
• Always unplug heater when not in use. Unplug power cord before servicing or moving the heater.
• Do not insert or allow ngers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock, re, or damage the
heater. Do not block or tamper with the heater in any manner while it is in operation.
• Do not block air intakes or exhaust in any manner. Do not place on soft surfaces, like a bed, where openings may become blocked. Do not depend
on the on/off switch as the sole means of disconnecting power when servicing or moving the heater. Always unplug the power cord.
• Always place the heater on a stable, at, level surface when operating, to avoid the chance of the heater overturning. Locate the power cord so the
heater or other objects are not resting on it. Do not run power cord under carpeting. Do not cover power cord with throw rugs, runners, or similar
coverings as this may cause cord to overheat. Arrange power cord away from room trafc and where
it will not be tripped over.
• This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Always use handle when moving this heater. Keep
combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (0.9 M) from the front of the heater and keep
them at least 1 foot (0.3 M) from the sides and rear.
• This heater is not intended for use in wet or damp locations. This heater is not intended for use in bathrooms, laundry areas and similar indoor
locations. Never locate a heater where it may fall into a bathtub or other water container.
• Do not use heater outdoors.
• This heater is not suitable for use in agricultural facilities including areas where livestock, poultry or other animals are conned. Please refer to
national electric code (nec) article 547-7 (2008), or applicable state or local codes or standards relating to electrical requirements for agricultural
buildings. This heater does not meet the requirements of nec article 547-7 (2008).
• This heater is not suitable for use in hazardous locations. Please refer to national electric code (nec) article 500 or applicable state or local codes or
standards relating to electrical requirements for hazardous locations. This heater does not meet the requirements of
nec article 500 (2008).
• Remote controls for other appliances or electronic equipment can sometimes interfere with the operation of this heater. If this occurs, move the heater
to another location.
• Keep heater remote control unit away from chairs and your bed where it may be sat or laid upon and inadvertently turn on the heater.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired operation. The user is cautioned that changes and modications
made to the equipment without the approval of manufacturer could void the user’s authority to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Read all instructions before using this Heater. Save these instructions
Rev.B 10/23 AR122ES3
Controls ™for Home App Controls
Oscillation Button
Press to Start/Stop the Oscillation function.
Power Button
Turn heater ON/OFF by pressing the Power Button.
Heat Mode Button
Heater can be adjusted to H3 (High), H2(Med) and H1(Low).
Timer Button
The timer can be set for up to 12 hours. 0.5 - 12.0 hours in
0.5-hour intervals up to 2 hours, 1-hour increments from 2
hours to 12 hours. Continue pressing the Timer Button to
reach the desired time setting.
This heater may be operated by the Manual Controls located on top of the unit, or by the Aria
App Controls on your Smart device. For a detailed description on how to pair your product to the
Aria for Home App, see Quick Pairing Guide.
Back Button
Timer Button
Power Button
Oscillation Button
Temperature
Control
LED Control Button:
(App Exclusive Feature)
Use this feature to enable
Night Mode. Night Mode
will turn OFF your device
Display and only show it
for 5 seconds if a button
is pressed.
Settings Button
Go to the settings
page to enable smart
speaker control and
device sharing.
Parts Included
1 Body
2 Support Base A
3 Support Base B
2
3
2. Lay the unit on a sturdy table for easier
base assembly. Push assembled Base
onto Body of unit as shown.
Assembly
1. Align the slots on with tabs on Base A
Base B. Snap Together.
3. Hold the in place while turning the Body
Support Base Assembly clock-wise
until it locks in place.
Wi-Fi Button
Press and hold the Wi-Fi button for ve seconds to put the unit
into EZ pairing mode. The LED indicator will start to blink red
when you do this.
Note: If you need to use access point (AP) mode to connect your
product, press and hold the Wi-Fi Button for another ve seconds.
The red LED will start to blink red, rapidly.
Base A
Base B
1
Heat Mode
Button
Auto Eco Button (+) ™
Press to increase the desired room temperature.
Auto Eco Button (-) ™
Press to decrease the desired room temperature.
Inline Power Switch
Before turning on heater, turn on the Inline Power safety switch
located on the rear of the unit. Switch on to enable power to
the heater.

Specyfikacje produktu

Marka: Lasko
Kategoria: Podgrzewacz
Model: AR122

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Lasko AR122, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Podgrzewacz Lasko

Lasko

Lasko MyHeat Max CD09100 Instrukcja

27 Stycznia 2025
Lasko

Lasko Artisan CX16550 Instrukcja

27 Stycznia 2025
Lasko

Lasko CC18310 Instrukcja

27 Stycznia 2025
Lasko

Lasko CT16658 Instrukcja

27 Stycznia 2025
Lasko

Lasko MyHeat Max CD09101 Instrukcja

27 Stycznia 2025
Lasko

Lasko CT30711 Instrukcja

27 Stycznia 2025
Lasko

Lasko CS12350 Instrukcja

27 Stycznia 2025
Lasko

Lasko CT16451 Instrukcja

27 Stycznia 2025
Lasko

Lasko CT14320 Instrukcja

27 Stycznia 2025
Lasko

Lasko CT22495 Instrukcja

27 Stycznia 2025

Instrukcje Podgrzewacz

Najnowsze instrukcje dla Podgrzewacz

Plieger

Plieger Genua Instrukcja

4 Kwietnia 2025
Scandia

Scandia Styliste’ 6 Instrukcja

4 Kwietnia 2025
Ardes

Ardes AR4P09 Instrukcja

3 Kwietnia 2025
King

King PKBS2420-3-T-FM Instrukcja

2 Kwietnia 2025
Dimplex

Dimplex 2NC81524L Instrukcja

30 Marca 2025
Dimplex

Dimplex FXL24i Instrukcja

30 Marca 2025
Einhell

Einhell MR 7 S Instrukcja

29 Marca 2025
Argoclima

Argoclima Dori Night Instrukcja

29 Marca 2025
DeLonghi

DeLonghi RHJ21F1015 Instrukcja

27 Marca 2025
Rinnai

Rinnai GEPH-22DTW Instrukcja

27 Marca 2025