Instrukcja obsługi Laser PB-CJ6000

Laser bank mocy PB-CJ6000

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Laser PB-CJ6000 (3 stron) w kategorii bank mocy. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/3

PB-CJ6000 QUICK START GUIDE

Product Connection and Use

What’s in the box

Back up Battery, Charger alligator clip cables, 3 in 1 USB charging cable, Cigerette Lighter USB Charger, Quick start guide

(this document)

Indicator Lights

On/Off button

To turn the device on, press the POWER BUTTON.

To turn the LED LIGHT on, press the POWER BUTTON twice.

To turn the LED LIGHT oﬀ, press repeatedly (refer to the diagram on the back of the battery)

Charging the Power Bank

Using a USB mains powered charger, plug the cable into the PW-CJ6000 (mini-USB end) or you can use the car charger

provided, however this will take longer than the mains charger. The LED light display will then start to ﬂash. It is

recommended that you charge the unit overnight before the ﬁrst use, then top up the unit as needed.

Car Charging

Leads Output

Power

Button

Power Stat

us Bar

LED Lamp

USB Output

Socket

Micro USB

Input Socket

(for charging)

PB-CJ6000 QUICK START GUIDE

Charging from your power bank

Once you have connected your device for charging (an iPhone for example), press the power button on the power bank.

The charging bar on your power bank will then illuminate and charging will begin.

Connection and Use

Product Speciﬁcation

USB OUTPUT - 5V 2.0AMP: Suits any USB chargeable device such as iPhone, iPad, Samsung P1000, Moto MH900 and MID

Contains intelligent protection for over-charge, over-discharge and short-circuit protection

NOTE: TAKE NOTE OF THE BATTERY POLARITY BEFORE CONNECTING

PB-CJ6000 QUICK START GUIDE

Warranty Against Defects

Laser Corporation Pty Ltd (“Laser”) warrants your new product to be free from defects in materials and workmanship for 12 months, from the date of

purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided. The beneﬁt of this

warranty is in addition to your rights under the Australian Consumer Law and to other rights and remedies of the consumer under a law in relation to

the goods or services to which the warranty relates.

Through a network of retailers and resellers, Laser will provide you with your choice of a repair, exchange (where possible) or refund (within Dead on

Arrival period) for this product if it becomes defective within the warranty period.This warranty will no longer apply where the defect is a result of

alteration, accident, misuse, abuse, normal wear and tear, neglect or improper storage. Please retain your receipt as proof of purchase

How to make a product warranty claim:

Step 1: Find your receipt which proves the date of purchase. Where the date of purchase cannot be veriﬁed, your place of purchase or Laser will make

an assessment based on the date of manufacture, the condition of the Laser Product and the type of defect.

Step 2a): Contact your place of purchase. They will assess the nature of the fault and repair, replace or fund the product as per their store refund or

warranty policy. Step 2b): If your place of purchase cannot be contacted, then you can contact Laser. Customer Service with details of your defective

Laser Product: Phone: (02) 9870 3388; or Email: support@laserco.com.au or online www.laserco.com.au/warranty (click on “Consumers (End Users)”).

Our business address is at 1/6-8 Byﬁeld Street, North Ryde, NSW 2113. Step 3: Laser will issue you with a Return Authorisation (RA) number within 48

hours. When requested, send us the defective Product and a copy of your receipt. Laser will cover the cost of the return delivery. Step 4: Wait for us

to contact you. Once we have received your defective Laser Product for inspection, we will inform you of our assessment of your claim within 7 days.

When we contact you, we will ﬁrstly let you know whether you have a valid claim under this Warranty, and if so, we will inform you whether your

defective Laser Product will be replaced or repaired, together with the number of days you can expect to wait to receive your replaced or repaired

Laser Product. Step 5: For further details on warranty cover and returns, please check Terms and Conditions for Warranty Returns section on

http://www.laserco.com.au/warranty

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major

failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the

goods fail to be of acceptable quality and the failure does not amount to a major failure.

Specyfikacje produktu

Marka:	Laser
Kategoria:	bank mocy
Model:	PB-CJ6000
Kolor produktu:	Czarny
Materiał obudowy:	Tworzywo sztuczne ABS
Waga produktu:	1300 g
Źródło ładowania:	USB
Pojemność baterii:	21.6 Wh
Przewody:	USB
Typ lamp:	LED
Diody LED:	Zasilanie
Prąd wyjściowy:	2.1 A
Maksymalna liczba jednocześnie podłączonych urządzeń:	1
Strumień świetlny:	86 lm
Funkcje ochrony zasilania:	Krótkie spięcie
Wbudowana latarka:	Tak
Kompatybilność ładowarki:	Uniwersalne
Porty wyjścia USB A:	1
Złącze ładowania USB:	Tak
Całkowita moc wyjściowa:	10.5 W