Instrukcja obsługi Lancom WLC-30

Lancom nieskategoryzowany WLC-30

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Lancom WLC-30 (2 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

T E C H N I C A L D A T A

Hardware

Power supply 12 V DC, external power adapter (110 or 230 V) with bayonet connector to secure against

disconnection

Power consumption Max. 8.5 W

Environment Temperature range 0–40 °C; humidity 0–95 %; non-condensing

Housing Robust synthetic housing, rear connectors, ready for wall mounting, Kensington lock; mea-

sures 210 x 45 x 140 mm (W x H x D)

Number of fans None; fanless design, no rotating parts, high MTBF

Interfaces

Uplink 10 / 100 / 1000 Mbps Gigabit Ethernet

ETH 4 individual ports, 10 / 100 / 1000 Mbps Gigabit Ethernet.

Each Ethernet port can be freely configured (LAN, WAN, monitor port, off). LAN ports operate

in switch mode or isolated. Additionally, external DSL modems or termination routers can be

operated at the Uplink port together with policy-based routing.

USB USB 2.0 Hi-Speed host port for connecting USB printers (USB print server) or USB data media

(FAT file system)

Config (Com) Serial configuration interface / COM port (8-pin Mini-DIN): 9,600 - 115,000 baud, suitable for

optional connection of analog / GPRS modems. Supports the internal COM-port server.

WAN protocols

Ethernet PPPoE, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and plain Ethernet (with or without DHCP),

RIP-1, RIP-2, VLAN, IP, GRE, L2TPv2 (LAC or LNS), IPv6 over PPP (IPv6 and IPv4/IPv6 Dual

Stack Session), IP(v6)oE (autoconfiguration, DHCPv6 or static)

Declaration of conformity

Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in

compliance with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of

the EU Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc

Package content

Documentation Quick Reference Guide (DE/EN), Installation Guide (DE/EN)

Cable Ethernet cable, 3m (kiwi-colored connectors)

WLC Public Spot Function included in firmware

Power adapter External power adapter, 12 V / 2 A DC, barrel connector 2.1 / 5.5 mm bayonet,

LANCOM item no. 111303 (not for WW devices)

M O U N T I N G A N D C O N N E C T I N G T H E D E V I C E

*) The additional power LED statuses are displayed in 5-seconds

rotation if the device is configured to be managed by the LANCOM

Management Cloud.

LANCOM WLC-30

Quick Reference Guide

C ud eadylo -r

aTP Ethernet interface (Uplink)

Connect the Uplink interface to a LAN switch or a WAN modem

with a suitable cable.

bTP Ethernet interfaces

Use one of the enclosed cables with the kiwi-colored connectors to

connect the interface ETH 1 to ETH 4 to your PC or a LAN switch.

cSerial configuration interface

For configuration, connect the device and a PC with a configuration

cable (cable sold separately).

dUSB interface

You can use the USB interface to connect a USB printer or a USB

flash drive for device configuration

eReset button

Pressed up to 5 seconds: device restart

Pressed until first flashing up of all LEDs:

configuration reset and device restart

fPower

After connecting the cable to the device, turn the bayonet

connector 90° clockwise until it clicks into place.

Use only the supplied power adapter.

4Please observe the following when setting up the device

AThe mains plug of the device must be freely accessible.

AFor devices to be operated on the desktop, please attach the adhesive rubber

footpads.

ADo not rest any objects on top of the device and do not stack multiple devices.

A Keep the ventilation slots on the side of the device clear of obstruction.

LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This docu-

ment contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and / or omissions. 111974/0421

Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!

Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.

a b c d e f

VPN

Online

LANCOM WLC-30

AP Status

ETH 1

ETH 2

ETH 3

ETH 4

Uplink

a db fec

a Power

Off Device switched off

Green, permanently* Device operational,

resp. device paired / claimed and LANCOM

Management Cloud (LMC) accessible

Green/orange, blinking Configuration password not set. Without a

configuration password, the configuration

data in the device is unprotected.

Red, blinking Charge or time limit reached

1x green inverse

blinking*

Connection to the LMC active, pairing OK,

device not claimed

2x green inverse

blinking*

Pairing error, resp. LMC activation code

not available

3x green inverse

blinking*

LMC not accessible, resp. communication

error

e Online

Off WAN connection inactive

Green, permanently WAN connection active

Red, permanently WAN connection error

f VPN

Off No VPN connection active

Green, permanently VPN connection active

Green, blinking Establishing VPN connections

d ETH

Off No networking device attached

Green, permanently Connection to network device operational,

no data traffic

Green, flickering Data transmission

b AP Status

Green, permanently At least one active access point is con-

nected and authenticated; no new and no

missing access point.

Green/orange, blinking At least one new access point.

Red, permanently The LANCOM Wi-Fi controller is not yet

operational; one of the following elements

is missing:

aRoot certificate

aDevice certificate

aCurrent time

aRandom number for the DTLS encryption

Red, blinking At least one of the expected access points

is missing.

c Uplink

Off No networking device attached

Green, permanently Connection to network device operational,

no data traffic

Green, flickering Data transmission

Specyfikacje produktu

Marka:	Lancom
Kategoria:	nieskategoryzowany
Model:	WLC-30
Wysokość produktu:	45 mm
Szerokość produktu:	210 mm
Głębokość produktu:	140 mm
Waga produktu:	450 g
Certyfikaty:	CE EN 62368, EN 55022, EN 55024
Kraj pochodzenia:	Niemcy
Standardy komunikacyjne:	IEEE 802.11e, IEEE 802.11i, IEEE 802.11w, IEEE 802.1Q, IEEE 802.1x
Prędkość transferu danych przez Ethernet LAN:	10,100,1000 Mbit/s
Ilość portów Ethernet LAN (RJ-45):	5
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	0 - 95 %
Syslog:	Tak
Przewody:	LAN (RJ-45)
Kod zharmonizowanego systemu (HS):	85176990
Liczba portów USB 2.0:	1
Napięcie:	230 V
Szyfrowanie / bezpieczeństwo:	AES-CCMP, AES-GCMP, SNMP, SNMPv2, SNMPv3, TKIP, WPA, WPA2, WPA2-PSK, WPA3-Enterprise, WPA3-PSK
Obsługa jakość serwisu (QoS):	Tak
Obsługa sieci VLAN:	Tak
Protokoły zarządzające:	SSL, SSH, HTTPS, Telnet, TFTP, SNMP, HTTP
Obsługiwane protokoły sieciowe:	ARP, proxy ARP, BOOTP, DHCP, DNS, HTTP, HTTPS, IP, ICMP, NTP/SNTP, NetBIOS, PPPoE (server), RADIUS, RIP-1, RIP-2, RTP, SIP, SNMP, TCP, TFTP, UDP, VRRP, VLAN
Zabezpieczenie firewall:	Tak
Obsługuje VPN:	IKE, IKEv2\nIPv4, IPv6 VPN
Obsługa Multicast:	Tak
Napięcie wejściowe DC:	12 V
Limit częstotliwości:	Tak
Czarna lista:	Tak