Instrukcja obsługi Lancom L-151gn Wireless

Lancom Różne - Inne L-151gn Wireless

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Lancom L-151gn Wireless (1 stron) w kategorii Różne - Inne. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
 L-151gn Wireless



LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. Subject to change without notice.
No liability for technical errors and/or omissions. 110893/0214

Screw the WLAN antennas supplied onto the con-
nectors Ant 1 and Ant 2. Depending on how the
antennas are to be used, the 'Antenna Grouping'
may need to be congured in order to ensure the
desired MIMO behavior.
a

Use the cable with the kiwi-
colored connectors to connect
the interfaces ETH to your PC or
a LAN switch.
b
a 
Off Device switched off
Green, on
(permanently)
Device operational
Blinking green Conguration password not set. Without a
conguration password, the conguration
data in the device is unprotected.
4



1 For devices to be
operated on the
desktop, please attach
the adhesive rubber
footpads
1 Do not rest any objects
on top of the device
1 Keep the ventilation
slots on the side of
the device clear of
obstruction
1 In case of wall
mounting, use the
drilling template as
supplied
1 Lockable wall mounting
with the LANCOM Wall
Mount (available as an
accessory).
LANCOM 1681V
Power
VDSL
Online
ETH 1
ETH 2
VPN
ETH 3
ETH 4
ISDN Status
c

When connecting the
cable to the device, turn
the bayonet connector
90° clockwise until it
clicks into place.
Use only the supplied
power adapter.
If you operate separately purchased antennas, please ensure that you do not exceed
the maximum allowed transmission power for your system. The system
operator is responsible for adhering to the threshold values.
Antennas are only to be attached or changed when the device is switched
off. Mounting or demounting antennas while the device switched on may
cause the destruction of the WLAN module!
5

Power supply 12 V DC, external power adapter (110 or 230V) with bayonet connector to secure against
disconnection
Power consumption Approx. 5 watt via 12V/1.5A power adapter (value refers to the overall power for the access
point and power adapter), about 4.3 watts via PoE
Environment Temperature range 0 – 50°C; humidity 0 – 95%; non-condensing
Housing Robust synthetic housing, rear connectors, ready for wall mounting, Kensington lock; measures
210 x 45 x 140 mm (W x H x D)
Number of fans None; fanless design, no rotating parts, high MTBF

Frequency band 2400-2483.5 MHz (ISM) (restrictions vary between countries)
Radio channels 2.4
GHz
Up to 13 channels, max. 3 non-overlapping (2.4-GHz band)

ETH 10/100 Base-TX, autosensing, auto node hub, PoE compliant with IEEE 802.3af
DSL over LAN (DSLoL) The LAN port can (even parallel to LAN mode) be used as a WAN port for connecting external
DSL modems (PPPoE) or external routers.
External antenna
connectors
Two reverse SMA connectors for external LANCOM AirLancer Extender antennas or for anten-
nas from other vendors.

CE EN 301 489-1, EN 301 489-17, EN 60950-1
2.4-GHz WLAN ETS 300 328
Notications Certications notied in Germany, Belgium, Netherlands, Luxembourg, Austria, Spain, Switzer-
land, UK, Italy, Portugal, Czech Republic, Denmark, Malta, France

Manual Quick Installation Guide (DE/EN/FR/ES/IT/PT/NL)
CD/DVD CD/DVD with rmware, management software (LANcong, LANmonitor, LANCAPI) and
documentation
Cable Ethernet cable, 3m (LAN: kiwi-colored connectors; WAN: green connectors)
Antennas Two 3-dBi dipole antennas
Power adapter External power adapter, NEST 12 V/1.5 A DC/S, barrel connector 2.1/5.5 mm bayonet,
LANCOM item no. 110723 (EU, 230 V), LANCOM item no. 110829 (UK, 230 V)
License information for the device rmware (LCOS) is available in
the le LCOS-Licenses.txt on the data medium supplied.
b 
Off No WLAN network dened or WLAN
module deactivated. The WLAN module is
not transmitting beacons.
Green At least one WLAN network is dened
and WLAN module activated. The WLAN
module is transmitting beacons.
Green inverse
ashing
Number of ashes = number of connected
WLAN stations, followed by a pause
(default).
Alternatively the frequency of the ashing
can indicate signal strength between the
access point and the device operating in
client mode.
c 
Off No networking device attached
Green, on (perma-
nently)
Connection to network device operational,
no data trafc
Flickering green Data trafc
A6C8DBA"&*&\cL^gZaZhh
LA6CA^c`
EdlZg
:I=
a b c
:I="&&%$&%%
6ci&
GZhZi
6ci'
b c
a
                          


Specyfikacje produktu

Marka: Lancom
Kategoria: Różne - Inne
Model: L-151gn Wireless

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Lancom L-151gn Wireless, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Różne - Inne Lancom

Instrukcje Różne - Inne

Najnowsze instrukcje dla Różne - Inne