Instrukcja obsługi Lanberg ICS-0808-0020

Lanberg kamera bezpieczeństwa ICS-0808-0020

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Lanberg ICS-0808-0020 (3 stron) w kategorii kamera bezpieczeństwa. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/3

QUICK INSTALLATION GUIDE

WIRELESS KIT

Statement

Installation Instruction Of WIFI NVR KIT Record video Video Backup

Video Playback

Setup The System

Safety Caution

Out Of Box Audit

NVR

HDD Install

IPC

Thank you for purchasing our product! This quick user guide will talk about main usages of

the product. More information can be found on our website and the help www.lanberg.eu

center. This user guide may contain inaccurate content due to hardware and software

upgrade. It is subject to change without previous notice.

Note:

Wireless NVR can’t be connected to WIFI router wirelessly at present. They can be only

connected by network cable.

This system is standalone with embedded Linux Operating System in the NVR. Just like a

desktop PC, need to hook a screen to the NVR to enter the OS. Any TV , monitor with VGA

or HDMI input should work for it.

1 Install antennas for cameras and the NVR;.

2.Connect a screen to the NVR via its HDMI or VGA port(HDMI and VGA cable

not included);

3. Plug the NVR to power(use bigger 12V 2A power adapter);

4. Plug cameras to power(use smaller 12V 1A power adapters);

5. Within seconds, you should see camera’s images on the screen;

6.Plug the mouse(included) to an USB port on back of NVR. You shall then be able to operate

on the system.

In the OS you can ﬁnd fullest functionalities including live view, record, playback, video

backup and all settings.

Default ID: admin

Password: none (means leaving the password empty, just click login)

Tips：To protect your privacy, please set your password at earliest convenience. Right click

the mouse Go to System Setup System Admin User Management to set password.→ → →

Record video is very easy on camera system.

1.Time Recording: Setup period of time of recording on NVR GUI .Right click mouse→

System Setup Record setup Record Plan.Click “time”and put mouse icon on the upper → →

left corner(for example“1”as picture shows),press and drag the mouse to the right to choose

the time.The list will turn to red.

2.Motion Recording: Only detect motion and then start recording.Right click mouse→

System Setup Record setup Record Plan.Click“motion”and put mouse icon on the upper → →

left corner(for example“1”as picture shows),press and drag the mouse to the right to choose

the time. The list will turn to green.

3. → Alarm recording: Right click mouse System Setup→Record setup→Record Plan.Click

“Alarm”and put mouse icon on the upper left corner(for example “1”as picture shows),press

and drag the mouse to the right to choose the time. The list will turn to yellow.

Note: Users can setup any period of time they want,for example 0:00:00 - 23:59:59,That’s

24 hours *7 days recording.When NVR detects hard disk,the default setting will be 24

hours*7 days recording.

Use U disk to copy video,so easy and convenient!

1.2 USB ports: Plug U ﬂash disk into

the USB port of NVR. Right click

on main menu Video backup→ →

choose backup channel→choose

video mode setup searching →

time search→ →choose recording

ﬁle on the list→video backup

(support 32G U ﬂash disk at max.

Recording ﬁle is packed one hour

per time.)

Steps:right clik mouse in main menu Video playback choose date,channel,record mode→ →

→ →click search then can view playback ﬁle.

1. IIIustration for playback button: play, pause: fast forward*2,*4,*8；

2. Play ﬁle: Choose the recording ﬁle in ﬁle list,as number“1”shown in picture. Choose one

of the recording, click “play”to play to recording ﬁle;

3. Video backup: Choose the recording ﬁle in ﬁle list,as number“1”shown in picture.insert

the U ﬂash disk, click “video backup”to backup the ﬁle;

4. Timeline: Click “date”and “time”at left bottom to check the timeline of recording, as

number“2”shown in picture;

5. On the timeline with recording ﬁle,left click the mouse, the can playback the ﬁle.

Tips: the system may not include hard disk depending on the kit you selected. the NVR works

most 3.5" SATA HDD or 2.5"SATA HDD

1.Unplug your NVR from power,unscrew and remove the top cover.

2.Connect the SATA power and data cables from the NVR to the

corresponding ports on your HDD (as shown).

lding the hard drive and the DVR ,gently turn it over and line up

e holes on the hard drive with the holes on the NVR. using a

illips screwdriver,screw the provided screws into the holes and

semble the cover.

ote: New HDD have to be formatted before recording.

o get better WIFI signal, it had better place the NVR in open

ea and high position.

1. Please do not put any ﬂuid container on the product.

2. Please use the product in ventilated environment and prevent blocking the vents.

3. Please use included power supply with the product to prevent damage to the product.

4. Please use the product under its standard working temperature and humidity.(advised

in this manual or distributor’s website)

5. Dust on PCB may cause short circuit.It is suggested to clean the dust on PCB timely

to make the product work properly.

6. Please obey the regulation and policy in your country and area during the installation

of this.

After receiving the product, please check all products and accessories with information

below. If any is missed or damaged, please contact the distributor.

1 Double antennas to WIFI range.WIFI Antenna Ports:

2. WAN Port: Connect your NVR to Internet

3 VGA Port:. For viewing on VGA monitor

4 HDMI Port: . For viewing on HDTV

5 USB Ports: . For mouse and backup

6 Power Input.

1. WiFi connection with NVRWIFI antenna: ；

2 input power 12V 1A;. DC Port:

3. Reset button: press reset button for 10 seconds to restore factory setting

and enter into matching-code mode.

ITEM:

WIFI NVR

Screw bag(4 screws for HDD)

DC 12V 2A power supply (for NVR)

User manual

WIFI IP Camera*

DC 12V 1A power supply(for IPC)*

Screw bag (for IPC）*

Antenna Extension Cord*

QUANTITY:

1pcs

4/8pcs

1/2(4CH/8CH)pcs

View On PC Via IE (Internet Explorer)

1. When your PC is in same LAN with the NVR （normally means they are connected to the

same router）

Step1.Find the IP address and port# of your NVR(IP address can be found in System

Setup Network Setup).→

2.OPTIONAL -When your computer/laptop is out of home/local network (eg. You want to

have a preview from the ofﬁce). Access from the CLOUD ID to the device

Step 1. Open your browser and enter the website address in the search engine:

www.noip.com - the website owner provides free DDNS services.

Step 2. Required account creation.

Enter: Hostname - the name you chose (eg Michał123) Choose a domain from the

drop-down list (eg DDNS.net Click on "Sign UP" to create an account.) After completing

the data, please conﬁrm your email to activate your account. step by step just like a service

provider leads you.

Step 3. NVR settings - Please enter

System Options→Network →DDNS

Director choose "NO-IP"→URL

enter the hostname (eg Michał123)

and the selected member from the

drop-down list (eg ddns.net)→User

enter the email given during

registration→Password enter the

password provided during

registration. Click the TEST button.

If the data is entered correctly, the

tests will pass

Step 4. In the browser, enter, for

example, michal123.ddns.net and

then we will open a page identical to

the one in the local network. You

must log in with administrator data

from the NVR (login and password).

Step 2. Enter the NVR’s IP address

in your IE browser for example:

http://192.1.1.7(If the default WEB

port 80 has been changed e.g. to

100,you’ll need to add new port

number when input IP address in

the browser, for example:

http://192.168.1.7:100).

NOTE: For proper conﬁguration, you

should have public IP and port

forwarding (available manual also at

www.noip.com right after

registration). View On Mobile

* quantities given in order for a 4-channel, followed by an 8-channel set (4ch/8ch).

QUICK INSTALLATION GUIDE

View On Mobile MENU-Do What Extend WIFI Range

Delete Repeater

Repeater Setup

Wireless Match-code Operation Procedure

Playback On Mobiles

1 Download the APP “IP PRO”.

Users can use cellphone to scan the QR code below to install the APP free of charge,or

users can search “IP Pro 3.0”on APP store or Google Play then install the APP . Click right button you can enter the main menu; click right button again you can exit the

current menu or return.

Wireless connection is easy and convenient, but it’s not universal application. Because of

the character of WIFI, the WIFI signal will decrease when going through some obstacles.

Some methods can be applied to bypass obstacles and extend WIFI range.

Move the mouse to targeted channels, left click to delete, and then click “Apply” and “OK”.

Application Example

Warning

As picture shown above, when IPCAM1 is put somewhere is out of NVR WIFI range, and

there is IPCAM2 between them with strong WIFI signal, users can put IPCAM1 close to NVR

and power it, setup IPCAM1 repeated by IPCAM2, and then install IPCAM1 to the

presupposed place.

WIFI range is like an apple and the antenna of NVR is in the center of it. WIFI signal is strong

all around the WIFI range. Antenna of NVR should be put straight up, if not, WIFI signal will

be weak. According to the signal transmission character of antenna, the antenna of cameras

should overlap or parallel to NVR WIFI range, as pictures showed below:

Split screen: change status of live view. You can choose

to view multiple cameras or any single camera.

Video Manage: manage IP cameras and NVR channels.

System setup: all system settings.

Video playback: playback recorded videos.

Video backup: backup recorded videos.

Color adjust: adjust the image setting of each camera.

Manual record: shortcut to change the record settings.

Volume: Adjust volume of audio cameras(works only for

audio cameras).

Setup Wizard: step by step guide of 1st time general

settings.

Fast Network: shortcut to network settings.

Wiﬁ add: add IP cameras into NVR channels wirelessly.

Adjust channel: adjust the order of the NVR channels.

Exit System: logout, reboot, close screen output and shut

down the system.

• General setup

Language

Time

Display resolution

HDD informaion

• Record setup

Record plan for each channel

video detectionr

• Channel setup

Manage channels and

cameras

• Network setup

All network related

settings

• System admin

System version

System maintenance including system upgrade

User and password management

Restore to default settings

System log

Menu bar

1. Position The Antenna Correctly

Installation method of antenna

extension cord

Notes: When WIFI signal is not strong enough against walls, users can take off the original

antenna and subtitute antenna extension cord. Drill a hole on the wall to let the extension

cord go through and simply it where WIFI signal is strong.

2.Use Antenna Extension Cord to prolong WIFI distance

Note:

1. Repeater function can’t strengthen WIFI signal for wireless NVR kit, but can extend the

distance by repeaters -- WIFI cameras.

2. Only when the repeater cameras and repeated cameras are positioned correctly, WIFI

distance will be extended.

3. Repeater function and 3 meters antenna extension cord are two methods to extend WIFI

range. Users can choose one according to real situation.

3.Set up cascading connection in a reasonable solution, extend

wiﬁ signal transfer distance

Click right button Choose System setup; you then shall enter the menu that enables you →

to do all settings related to this system.

Step 1: Start NVR and IPC.Right click mouse match-code interface.→ →Wiﬁ add

Step 2: Press reset button on camera for 10 seconds and get match-code mode.

Step 3: Click “Exit”after adding.Matching code completes.

Note: Default valid time to match code is within 10 minutes after IPC starts.if overtime,

match code function will shut off.users have to press reset button on camera for 10

seconds and get match-code mode again.

Step 1: Right click on NVR’S GUI, left click “video management” then left click repeater”→

Step 2: Add repeater

As picture shown below, click icon + besides channel 3, choose other channel.

Step 3: As picture shown below, it means IPC1 is connected to NVR through IPC2 and

IPC3. IPC2 is connected to NVR through IPC3. IPC3 is connected to NVR directly.

Step 4: Click “Apply” and then click “refresh” to check if the setting is successful.

System Setup

Run the APP “IP PRO”, login with your account or choose Trial Click“+”to “Add device by →

ID”→ﬁnd it the NVR’s Network setup, or right bottom corner on screen),Description(e.g.

Home Camera), User name (default user name is “admin”)and password(default is empty)→

Submit to get back to your device list Click the device to view the cameras.→

In the IP PRO APP，while viewing live video of the system, click Playback, you will enter the

remote playback menu. The APP automatically playback camera 1, you can switch channels

the CH.

Tips: Videos in playback are HD@real time which requires very good transmission condition.

We suggest to playback in LAN. Remote playback out of LAN may not 100% work due to

connection & network condition.

Note: For IOS system,it requires IOS 8.0 version or above.For android, android 4.4 or above.

Tips: if you’ve set a password on your NVR system, please update your password on APP

to view.

CORRECT METHOD FAULT METHOD

ANTENNA EXTENSION CORD

IP CAMERA

WINDOW

WALL

NVR

IPCAM1IPCAM2NVR

2 Add the NVR system to your APP device list .

In order to reset the password on the recorder, enter a random string of characters into the

designated login ﬁeld and conﬁrm it to trigger the appearance of the error message. Then

alternately press the buttons of the connected mouse to the recorder 6 times, starting from the

left and ending with the right one (left, right, left right etc.). After doing this, you will see a message

about restoring default users - press "Yes". Then a window will appear with the option of setting

a new password - in this case, you do not need to provide the old one.

Notes:

Producer: Impakt S.A. ul. Stanisława Lema 16; 62-050 Mosina - Poland

Declaration of Conformity CE - www.lanberg.eu

Country of origin: Chiny / China

Warranty: 24 months.

General warranty terms available at: www.impakt.com.pl/service.html

Notes: In case you notice a decrease in the quality of neighboring wireless connections (eg. Wi-Fi

router) on the 2.4 GHz band, check if your device transmits signals on the same channel as the

camera recorder - channel 1. If so, try changing the broadcasting channel Your device (eg. in the

router) to another usable channel - 11 or 6 (assuming the router's Wi-Fi operation at 20 MHz

bandwidth).

Specyfikacje produktu

Marka:	Lanberg
Kategoria:	kamera bezpieczeństwa
Model:	ICS-0808-0020
Kolor produktu:	Black, White
Rodzaj zasilania:	DC
Technologia łączności:	Przewodowy i Bezprzewodowy
Gniazdko wyjścia DC:	Tak
Liczba kamer:	8
Formaty kompresji:	H.264, H.265, H.265+
Długość przekątnej ekranu:	- "
Przeznaczenie:	Wewnątrz/Na wolnym powietrzu
Liczba kanałów:	8 kan.
Ilość portów Ethernet LAN (RJ-45):	1
Zakres temperatur (eksploatacja):	-10 - 55 °C
Zakres wilgotności względnej:	10 - 90 %
Tryb nocny:	Tak
Wi-Fi:	Tak
Standardy Wi- Fi:	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Liczba portów USB 2.0:	1
Przewodowa sieć LAN:	Tak
Zintegrowany czytnik kart:	Nie
Ilość portów HDMI:	1
Liczba obsługiwanych HDD:	1
Rodzaj interfejsu sieci Ethernet:	Fast Ethernet
Stopień ochrony IP:	IP66
Liczba portów VGA (D-Sub):	1
Obsługiwane protokoły sieciowe:	UPnP, SMTP, PPPoE, DHCP
Obsługiwane tryby wideo:	720p, 960p, 1080p
Kolor:	Tak
Typ nośników pamięci:	HDD
Długość stałej ogniskowej:	3.6 mm
Balans bieli:	Automatyczna
Typ diody LED:	Podczerwień
Min. Oświetlenie:	0.001 lx
Rozmiar HDD:	3.5 "
Wyjście prądu stałego (w amperach):	2 A
Wielkość czujnika CCD:	1/3 "
Wyjście prądu stałego (w woltach):	12
Odległość widzenia nocnego (Night Vision):	20 - 25 m
Interfejs HDD:	SATA
Zintegrowany aparat fotograficzny:	Tak
Rozmiar kamery:	Pocisk
Urządzenie rejestrujące dołączone:	Tak
Szerokość kamery:	66 mm
Głębokość kamery:	180 mm
Szerokość urządzenia rejestrującego:	258 mm
Głębokość urządzenia rejestrującego:	210 mm
Wysokość urządzenia rejestrującego:	42 mm
Maks. pojemność HDD:	6000 GB
Interfejs kamery:	Wi-Fi/RJ-45
Rozdzielczość zdjęcia:	1920 x 1080 px
Normalne zużycie mocy urządzenia rejestrującego:	5 W
Waga urządzenia rejestrującego:	1000 g